{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-4BD01-0AA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-4BD01-0AA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-4BD01-0AA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-4BD01-0AA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC ET 200S digital output module, 4 channels, 24 VDC, 0.5 A per channel, 15 x 81 x 52 mm, active production.","salesMarkdown":"## Channel count and per-output current limit The 6ES7132-4BD01-0AA0: Four digital outputs, each rated 0.5 A at 24 VDC sourced from the ET 200S power module. The module as a whole is limited to 2 A total, so all four channels can be loaded simultaneously at the per-channel maximum without exceeding the backplane or terminal capacity. The 0.5 A per channel is a continuous rated value, not a surge rating. For lamp loads the maximum switching frequency drops to 10 Hz; inductive loads are limited to 2 Hz. Resistive loads switch at up to 100 Hz. The 100 µs turn-on and 300 µs turn-off times are fast enough for most discrete control loops but not for high-speed counter or pulse-train applications. The output stage includes reverse voltage protection when the load voltage matches the power module supply, and reverse polarity protection — though a polarity reversal can forward-bias the outputs, so the wiring check at commissioning matters. The module draws up to 10 mA from the 3.3 V backplane bus and up to 5 mA per channel from the load voltage L+ when quiescent. The 0.8 W typical power loss is low enough that no forced cooling is needed in a standard IP20 enclosure, but adjacent modules should be spaced per the ET 200S derating guidelines if the ambient exceeds 55 °C.","metaTitle":"Siemens 6ES7132-4BD01-0AA0 Digital Output Module, 4 x 0.5 A","metaDescription":"Siemens 6ES7132-4BD01-0AA0 ET 200S digital output module, 4 channels at 0.5 A per channel, 24 VDC from power module.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Digital Output Modules"],"specifications":{"Depth":"52 mm","Width":"15 mm","Height":"81 mm","Remark":"1 byte","Lower Limit":"48 Ω","Upper Limit":"3 400 Ω","For Uprating":"No","With Packing":"4 bit","Shielded, Max.":"1 000 m","Weight, approx.":"40 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"100 µs","\"1\" To \"0\", Max.":"300 µs","Power loss, typ.":"0.8 W","Rated value (DC)":"24 V; From power module","Unshielded, Max.":"600 m","On Lamp Load, Max.":"10 Hz","Between The Channels":"No","Diagnostics function":"No","For Signal \"1\", Min.":"L+ (-1 V)","Isolation tested with":"500 V DC","Current per module, max.":"2 A","Response threshold, typ.":"0.7 to 1.5 A","Number of digital outputs":"4","With Inductive Load, Max.":"2 Hz","With Resistive Load, Max.":"100 Hz","For Signal \"1\" Rated Value":"0.5 A","Reverse voltage protection":"Yes; when using the same load voltage as on the power module","Controlling a digital input":"Yes","Reverse polarity protection":"Yes; polarity reversal can lead to the digital outputs being connected through","Address space per module, max.":"1 byte","For Redundant Control Of A Load":"Yes; per module","from backplane bus 3.3 V DC, max.":"10 mA","For Signal \"0\" Residual Current, Max.":"0.3 mA","Between The Channels And Backplane Bus":"Yes","For Signal \"1\" Permissible Range, Max.":"600 mA","For Signal \"1\" Permissible Range, Min.":"7 mA","Status indicator digital output (green)":"Yes","from load voltage L+ (without load), max.":"5 mA; Per channel","Limitation of inductive shutdown voltage to":"-55 to -60 V, L+( )"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$80.01 – $238.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=244168&mlfb=6ES7132-4BD01-0AA0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7132-4BD01-0AA0/alternatives.json"},"ai":{"faq":[{"question":"Is Siemens 6ES7132-4BD01-0AA0 compatible with ET 200S base units?","answer":"Yes. This is a standard ET 200S electronic module designed to snap onto the DIN rail via the matching base unit. The 15 mm width corresponds to a single-width slot."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-4BD01-0AA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-4BD01-0AA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}