{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-6BD20-0BA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-6BD20-0BA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-6BD20-0BA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6BD20-0BA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC ET 200SP, digital output module DQ 8x24VDC/0.5A ST, 8 channels, 24 V DC, 0.5 A per channel, current-sourcing, diagnostics, BU type A0.","salesMarkdown":"The 6ES7132-6BD20-0BA0: Per-channel current is 0.5 A, but the module's total current is thermally limited: 8 A up to 30 °C, 6 A up to 40 °C, 4 A up to 50 °C, and 4 A up to 60 °C. That means at 40 °C ambient you can't run all eight channels at 0.5 A simultaneously — you'd hit 6 A total. Plan your load distribution accordingly, especially in a crowded panel. Switching times are 50 µs typical for turn-on, 100 µs typical for turn-off — fast enough for most valve banks and indicator arrays, but not for high-speed PWM or isochronous motion (MSO and PWM are both No, isochronous mode is No). Module-wide diagnostics cover short-circuit and wire-break, plus a diagnostic alarm and group error. That saves troubleshooting time on the line — the CPU knows which module faulted, not just which rack. Width is 15 mm — one of the narrowest in the ET 200SP family. Depth is 58 mm, height 73 mm. It snaps onto a BU type A0 base unit; that base unit handles 1-, 2-, 3-, and 4-wire connections. For 3-wire you need a base unit with AUX terminals or a separate potential distributor module; 4-wire adds a potential distributor module. Plan the base unit order alongside the module. Cable lengths: unshielded up to 600 m, shielded up to 1000 m. For most factory-floor runs that's plenty of headroom. Lifecycle status is current — no end-of-life notice, no last-time-buy pressure. Firmware is V1.1 and field-updatable, so you can standardize on this revision across the plant. Power draw is 1 W typical, negligible for backplane budgeting.","metaTitle":"Siemens 6ES7132-6BD20-0BA0 ET 200SP DQ 8x24VDC/0.5A ST, 8 A","metaDescription":"Siemens 6ES7132-6BD20-0BA0 ET 200SP digital output module, 8 channels, 24 VDC, 0.5 A per channel, current-sourcing, diagnostics, current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"DQ":"Yes","MSO":"No","PWM":"No","Depth":"58 mm","Width":"15 mm","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","Wire-break":"Yes; Module-wise","Group error":"Yes","Lower Limit":"12 Ω","Upper Limit":"3 400 Ω","For Uprating":"No","Oversampling":"No","Short-circuit":"Yes; Module-wise","Shielded, Max.":"1 000 m","Current-sinking":"No","Weight, approx.":"30 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"50 µs","\"0\" To \"1\", Typ.":"50 µs","\"1\" To \"0\", Max.":"100 µs","\"1\" To \"0\", Typ.":"100 µs","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Firmware version":"V1.1","Isochronous mode":"No","Power loss, typ.":"1 W","Rated value (DC)":"24 V","Unshielded, Max.":"600 m","usable BaseUnits":"BU type A0","1-Wire Connection":"BU type A0","2-Wire Connection":"BU type A0","3-Wire Connection":"BU type A0 with AUX terminals or potential distributor module","4-Wire Connection":"BU type A0 + Potential distributor module","FW update possible":"Yes","On Lamp Load, Max.":"10 Hz","up to 30 °C, max.":"8 A","up to 40 °C, max.":"6 A","up to 50 °C, max.":"4 A","up to 60 °C, max.":"4 A","Between The Channels":"No","Diagnostics function":"Yes","HW functional status":"From FS08","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 61508":"SIL 2","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Type of digital output":"Source output (PNP, current-sourcing)","For Channel Diagnostics":"No","Current per module, max.":"8 A","Response threshold, typ.":"2.8 to 5.2 A","Short-circuit protection":"Yes","Current consumption, max.":"60 mA; without load","Current per channel, max.":"2 A","Mechanical coding element":"Yes","Number of digital outputs":"4","With Inductive Load, Max.":"2 Hz","With Resistive Load, Max.":"100 Hz","For Signal \"1\" Rated Value":"2 A","Controlling a digital input":"Yes","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"-30 °C; < 0 °C as of FS08","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"-30 °C; < 0 °C as of FS08","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","Address space per module, max.":"1 byte; + 1 byte for QI information","DQ with energy-saving function":"No","For Redundant Control Of A Load":"Yes","Digital outputs, parameterizable":"Yes","Type of mechanical coding element":"Type A","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.1 mA","Between The Channels And Backplane Bus":"Yes","PROFIBUS from GSD version/GSD revision":"GSD Revision 5","PROFINET from GSD version/GSD revision":"GSDML V2.3","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","PCS 7 configurable/integrated from version":"V8.1 SP1","Performance level according to ISO 13849-1":"PL d","Installation altitude above sea level, max.":"5 000 m; Restrictions for installation altitudes > 2 000 m, see manual","Limitation of inductive shutdown voltage to":"Typ. L+ (-50 V)","STEP 7 configurable/integrated from version":"V5.5 SP3 / -","STEP 7 TIA Portal configurable/integrated from version":"V11 SP2 / V13","Suitable for safety-related tripping of standard modules":"Yes; see FAQ Entry ID: 39198632","Color code for module-specific color identification plate":"CC02","Between The Channels And The Power Supply Of The Electronics":"No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$53.34 – $151.55","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/27014fb8883550a5f7efe775a81fc045.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=79393&mlfb=6ES7132-6BD20-0BA0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6BD20-0BA0/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this module?","answer":"Eight digital outputs, 24 VDC, 0.5 A per channel, current-sourcing (PNP). Total current is derated by ambient: 8 A at 30 °C, 6 A at 40 °C, 4 A at 50 °C and 60 °C. Switching times are 50 µs on, 100 µs off typical."},{"question":"Will 6ES7132-6BD20-0BA0 drop into a panel specified around 6ES7522-1BH01-0AB0?","answer":"No — those are different families. The 6ES7132-6BD20-0BA0 is an ET 200SP module (15 mm wide, BU type A0 base unit), while the 6ES7522-1BH01-0AB0 is an S7-1500 form factor. They share no mechanical or electrical interface. Rewiring and a different rack are required."},{"question":"What diagnostics does this module support?","answer":"Module-wide short-circuit and wire-break detection, a diagnostic alarm, and a group error signal. I&M data (I&M0 to I&M3) is supported for asset tracking."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-6BD20-0BA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-6BD20-0BA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}