{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-6BD20-0CA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-6BD20-0CA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-6BD20-0CA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6BD20-0CA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200SP, digital output module DQ 4x24VDC/2A, MSO, 4 channels in BU type A0, 15 mm width, 58 mm depth, 24 V DC rated, 8 µs jitter, isochronous mode.","salesMarkdown":"The Siemens 6ES7132-6BD20-0CA0 is a 4-channel digital output module for the ET 200SP distributed I/O system. It provides DQ (Yes) and MSO (Yes) functionality, meaning each channel can be configured as a standard digital output or a failsafe output for safety-related applications — the MSO flag tells you it supports the safety-oriented output variant, not just a standard sink/source driver. Rated at 24 V DC, each channel handles 2 A continuous with a total module current derating: 8 A up to 30 °C, 6 A up to 40 °C, 4 A up to 50 °C, and 4 A up to 60 °C. That derating curve is load-bearing for panel design — if you're running all four channels near 2 A in a 50 °C cabinet, you're at the limit. Switching times are tight: 50 µs typical 0→1, 100 µs typical 1→0. Maximum jitter is 8 µs, and isochronous mode is supported — this module is built for time-synchronized motion or high-speed gantry applications where deterministic output timing matters. Supports automatic encoding, firmware update, and I&M data (I&M0 to I&M3). Diagnostic alarm, group error, short-circuit detection (channel by channel), and wire-break detection (channel by channel) are all onboard — reduces troubleshooting time on the line. Maximum cable length: 1 000 m shielded, 600 m unshielded. Minimum load resistance is 12 Ω, maximum 3 400 Ω. Not rated for PWM or oversampling — this is a straight on/off output module, not a high-speed pulse train driver.","metaTitle":"Siemens 6ES7132-6BD20-0CA0 ET 200SP DQ 4x24VDC/2A MSO, 8 µs","metaDescription":"Siemens 6ES7132-6BD20-0CA0 ET 200SP digital output module, 4 channels, 24 V DC, 2 A per channel, DQ Yes, MSO Yes, isochronous mode, 8 µs jitter, current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"DQ":"Yes","MSO":"Yes","PWM":"No","Depth":"58 mm","Width":"15 mm","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","Wire-break":"Yes; channel by channel","Group error":"Yes","Lower Limit":"12 Ω","Upper Limit":"3 400 Ω","For Uprating":"No","Jitter, max.":"8 µs","Oversampling":"No","Short-circuit":"Yes; channel by channel","Shielded, Max.":"1 000 m","Current-sinking":"No","Weight, approx.":"30 g","lifecycle_stage":"current","\"0\" To \"1\", Typ.":"50 µs","\"1\" To \"0\", Typ.":"100 µs","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Isochronous mode":"Yes","Power loss, typ.":"1 W","Rated value (DC)":"24 V","Unshielded, Max.":"600 m","usable BaseUnits":"BU type A0","1-Wire Connection":"BU type A0","2-Wire Connection":"BU type A0","3-Wire Connection":"BU type A0 with AUX terminals or potential distributor module","4-Wire Connection":"BU type A0 + Potential distributor module","Automatic encoding":"Yes","FW update possible":"Yes","On Lamp Load, Max.":"10 Hz","up to 30 °C, max.":"8 A","up to 40 °C, max.":"6 A","up to 50 °C, max.":"4 A","up to 60 °C, max.":"4 A","Between The Channels":"No","Diagnostics function":"Yes","HW functional status":"From FS06","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 61508":"SIL 2","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Type of digital output":"Source output (PNP, current-sourcing)","For Channel Diagnostics":"Yes; red LED","Current per module, max.":"8 A","Response threshold, typ.":"2.8 to 5.2 A","Short-circuit protection":"Yes","Current per channel, max.":"2 A","Mechanical coding element":"Yes","Number of digital outputs":"4","With Inductive Load, Max.":"2 Hz","With Resistive Load, Max.":"100 Hz","Bus cycle time (TDP), min.":"500 µs","For Signal \"1\" Rated Value":"2 A","Controlling a digital input":"Yes; Minimum current consumption 7 mA","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"-30 °C; < 0 °C as of FS06","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"-30 °C; < 0 °C as of FS06","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","Address space per module, max.":"4 byte; 2 channels per submodule + QI information","DQ with energy-saving function":"No","Digital outputs, parameterizable":"Yes","Type of mechanical coding element":"Type A","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.1 mA","Between The Channels And Backplane Bus":"Yes","PROFIBUS from GSD version/GSD revision":"GSD Revision 5","PROFINET from GSD version/GSD revision":"GSDML V2.3","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Performance level according to ISO 13849-1":"PL d","Installation altitude above sea level, max.":"5 000 m; Restrictions for installation altitudes > 2 000 m, see manual","Limitation of inductive shutdown voltage to":"L+ -(37 to 41V)","STEP 7 configurable/integrated from version":"V5.5 / -","STEP 7 TIA Portal configurable/integrated from version":"V13 SP1 / -","Suitable for safety-related tripping of standard modules":"Yes; see FAQ Entry ID: 39198632","Color code for module-specific color identification plate":"CC02"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$52.96","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0beb43cc5883f84f808f744b9f9d6b5d.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=218984&mlfb=6ES7132-6BD20-0CA0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6BD20-0CA0/alternatives.json"},"ai":{"faq":[{"question":"What does DQ Yes mean on this module?","answer":"DQ Yes means the module is a digital output module — standard on/off control of 24 V DC loads up to 2 A per channel."},{"question":"What does MSO Yes mean?","answer":"MSO Yes means the module supports failsafe (safety-oriented) output operation — it can be used in safety-related applications up to SIL 3 / PL e when paired with a suitable safety CPU and configured accordingly."},{"question":"What base units are compatible?","answer":"Requires BU type A0 base units. For 1-, 2-, or 3-wire connections, BU type A0 alone is sufficient. For 4-wire connections, add a potential distributor module."},{"question":"What is the maximum current per channel and total module?","answer":"Each channel is rated 2 A. Total module current derates with ambient temperature: 8 A up to 30 °C, 6 A up to 40 °C, 4 A up to 50 °C, and 4 A up to 60 °C."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-6BD20-0CA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-6BD20-0CA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}