{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-6BF00-0CA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-6BF00-0CA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-6BF00-0CA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6BF00-0CA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200SP digital output module, 6ES7132-6BF00-0CA0, 4 DQ 24 V DC / 4 A, MSO, diagnostics, BU type A0.","salesMarkdown":"## Integrator's note on this ET 200SP output slice The 6ES7132-6BF00-0CA0 is a 4-channel digital output module for the Siemens ET 200SP distributed I/O system. Each channel sources 24 V DC at up to 4 A continuous, derated to 60 °C ambient — that's the full rated current, no thermal foldback until above that point. The module supports MSO (Module-Specific Operation), meaning it can be used in an isochronous real-time (IRT) cycle for motion or high-speed logic applications where deterministic update matters. It mounts on a BU type A0 BaseUnit, which carries the wiring interface. The module uses automatic encoding so the I/O controller reads the hardware identity without DIP-switch setting. Diagnostics include channel-by-channel wire-break and short-circuit detection, plus a group error and diagnostic alarm — useful for fast fault isolation on a running line. Switching times are 50 µs turn-on and 100 µs turn-off, typical. The module draws 1 W typical power loss from the backplane bus. I&M data (I&M0 to I&M3) is supported, which helps with asset tracking and firmware version control during commissioning. ## Wiring and integration constraints The module requires a BU type A0 BaseUnit. For 2-wire or 3-wire connection, use BU type A0 with AUX terminals or a potential distributor module. For 4-wire connection, add a potential distributor module. The module does not support current-sinking outputs — it is current-sourcing only. Maximum cable length is 1 000 m shielded, 600 m unshielded. The module is isolated tested at 707 V DC type test. Firmware updates are possible via the ET 200SP backplane.","metaTitle":"Siemens 6ES7132-6BF00-0CA0 ET 200SP DQ 4x24VDC/4A, MSO","metaDescription":"Active Siemens 6ES7132-6BF00-0CA0 digital output module, 4 channels 24 V DC, 4 A per channel, MSO, diagnostics, BU type A0. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"DQ":"Yes","MSO":"Yes","PWM":"No","Depth":"58 mm","Width":"15 mm","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","Wire-break":"Yes; channel by channel","Group error":"Yes","Lower Limit":"48 Ω","Upper Limit":"12 kΩ","For Uprating":"No","Oversampling":"No","Short-circuit":"Yes; channel by channel","Shielded, Max.":"1 000 m","Current-sinking":"No","Weight, approx.":"30 g","lifecycle_stage":"current","\"0\" To \"1\", Typ.":"50 µs","\"1\" To \"0\", Typ.":"100 µs","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Isochronous mode":"Yes","Power loss, typ.":"1 W","Rated value (DC)":"24 V","Unshielded, Max.":"600 m","usable BaseUnits":"BU type A0","1-Wire Connection":"BU type A0","2-Wire Connection":"BU type A0","3-Wire Connection":"BU type A0 with AUX terminals or potential distributor module","4-Wire Connection":"BU type A0 + Potential distributor module","Automatic encoding":"Yes","FW update possible":"Yes","On Lamp Load, Max.":"10 Hz","up to 50 °C, max.":"4 A","up to 60 °C, max.":"4 A","Between The Channels":"No","Diagnostics function":"Yes","HW functional status":"From FS07","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 61508":"SIL 2","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Type of digital output":"Source output (PNP, current-sourcing)","For Channel Diagnostics":"Yes; red LED","Current per module, max.":"4 A","Response threshold, typ.":"0.7 to 1.3 A","Short-circuit protection":"Yes","Current per channel, max.":"0.5 A","Mechanical coding element":"Yes","Number of digital outputs":"8","With Inductive Load, Max.":"2 Hz","With Resistive Load, Max.":"100 Hz","Bus cycle time (TDP), min.":"500 µs","For Signal \"1\" Rated Value":"0.5 A","Controlling a digital input":"Yes","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"-30 °C; < 0 °C as of FS07","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"-30 °C; < 0 °C as of FS07","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","Address space per module, max.":"8 byte; 2 channels per submodule + QI information","DQ with energy-saving function":"No","For Redundant Control Of A Load":"Yes","Digital outputs, parameterizable":"Yes","Type of mechanical coding element":"Type A","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.1 mA","Between The Channels And Backplane Bus":"Yes","PROFIBUS from GSD version/GSD revision":"One GSD file each, Revision 3 and 5 and higher","PROFINET from GSD version/GSD revision":"GSDML V2.3","Execution and activation time (TCO), min.":"48 µs","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","PCS 7 configurable/integrated from version":"V8.1 SP1","Performance level according to ISO 13849-1":"PL d","Installation altitude above sea level, max.":"5 000 m; Restrictions for installation altitudes > 2 000 m, see manual","Limitation of inductive shutdown voltage to":"Typ. L+ (-50 V)","STEP 7 configurable/integrated from version":"V5.5 / -","STEP 7 TIA Portal configurable/integrated from version":"V13 SP1 / -","Suitable for safety-related tripping of standard modules":"No; see FAQ Entry ID: 39198632","Color code for module-specific color identification plate":"CC02","Between The Channels And The Power Supply Of The Electronics":"No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$54.61 – $157.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/932d471673a933e70a8e756e16da39f4.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=303986&mlfb=6ES7132-6BF00-0CA0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6BF00-0CA0/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum output current per channel?","answer":"4 A per channel, continuous, up to 60 °C ambient. No derating below that temperature."},{"question":"Does this module support MSO (Module-Specific Operation)?","answer":"Yes, MSO is supported, enabling isochronous real-time operation for motion or high-speed logic."},{"question":"What BaseUnit is required?","answer":"BU type A0. For 3-wire or 4-wire connections, additional AUX terminals or a potential distributor module may be needed."},{"question":"Can I use this module as a direct replacement for the 6ES7522-1BH01-0AB0?","answer":"No. The 6ES7132-6BF00-0CA0 is an ET 200SP slice with a different form factor and backplane. It is not mechanically or electrically interchangeable with the S7-1500 module."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-6BF00-0CA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-6BF00-0CA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}