{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-6BF00-2AA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-6BF00-2AA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-6BF00-2AA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6BF00-2AA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200SP digital output module, 6ES7132-6BF00-2AA0, DQ 8x24VDC/0.5A Basic, 8 channels, 24 V DC, 0.5 A per channel, SIL 2, BU type A0.","salesMarkdown":"## Module job in the ET 200SP slice The 6ES7132-6BF00-2AA0 is an 8-channel digital output module for the Siemens ET 200SP distributed I/O system — it switches 24 VDC loads (solenoids, contactors, indicator lamps) on a per-channel basis at 0.5 A per channel, up to 4 A total per module at 60 °C. It is a standard DQ (digital output) module — no MSO (motor starter output) or PWM capability, so it is for on/off load switching only, not variable-speed or pulse-width modulated control. ## Safety and diagnostics envelope Rated SIL 2 per IEC 61508, the module can be used in safety-related applications up to that integrity level — for example, guarding circuits or emergency-stop loops where the output must be de-energised on a fault. Diagnostics include group error and diagnostic alarm, plus I&M data (I&M0 to I&M3) for asset tracking and firmware version identification — firmware V1.0 is field-updatable. The module supports redundancy (two modules driving the same load) and is tested for isolation at 707 V DC type test between channel groups. ## Base unit and wiring constraints Requires BU type A0 base unit — 1-wire, 2-wire, and 3-wire connections use the standard A0; 4-wire connections need BU type A0 plus a potential isolation module. Maximum cable length is 1 000 m shielded, 600 m unshielded — long enough for remote field devices in a plant but not for inter-building runs without repeaters. Switching times: 100 µs off-to-on, 150 µs on-to-off at rated load — fast enough for most discrete control but not for high-speed counting or encoder outputs.","metaTitle":"Siemens 6ES7132-6BF00-2AA0 ET 200SP DQ 8x24VDC/0.5A Basic","metaDescription":"Siemens 6ES7132-6BF00-2AA0 ET 200SP digital output module, 8 channels, 24 VDC, 0.5 A per channel, SIL 2, BU type A0. Current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Digital Output Modules"],"specifications":{"DQ":"Yes","MSO":"No","PWM":"No","Depth":"58 mm","Width":"15 mm","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","Wire-break":"No","Group error":"Yes","Lower Limit":"48 Ω","Upper Limit":"12 kΩ","For Uprating":"No","Oversampling":"No","Short-circuit":"No","Shielded, Max.":"1 000 m","Current-sinking":"No","Weight, approx.":"28 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"100 µs; at rated load","\"1\" To \"0\", Max.":"150 µs; at rated load","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Firmware version":"V1.0","Power loss, typ.":"1 W","Rated value (DC)":"24 V","Unshielded, Max.":"600 m","usable BaseUnits":"BU type A0","1-Wire Connection":"BU type A0","2-Wire Connection":"BU type A0","3-Wire Connection":"BU type A0 with AUX terminals or potential distributor module","4-Wire Connection":"BU type A0 + Potential isolation module","FW update possible":"Yes","On Lamp Load, Max.":"10 Hz","up to 50 °C, max.":"4 A","up to 60 °C, max.":"4 A","Between The Channels":"No","Diagnostics function":"Yes","Isolation tested with":"707 V DC (type test)","Redundancy capability":"Yes","SIL acc. to IEC 61508":"SIL 2","Channel status display":"Yes; Green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Type of digital output":"Source output (PNP, current-sourcing)","For Channel Diagnostics":"No","Current per module, max.":"4 A","Response threshold, typ.":"0.7 to 1.7 A","Short-circuit protection":"Yes; per channel, electronic","Current consumption, max.":"45 mA; without load","Current per channel, max.":"0.5 A","Mechanical coding element":"Yes","Number of digital outputs":"8","With Inductive Load, Max.":"2 Hz","With Resistive Load, Max.":"100 Hz","For Signal \"1\" Rated Value":"0.5 A","Controlling a digital input":"Yes","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C; in all other mounting positions","Vertical Installation, Min.":"0 °C; in all other mounting positions","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"0 °C","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","Address space per module, max.":"1 byte","DQ with energy-saving function":"No","For Redundant Control Of A Load":"Yes; per module","Digital outputs, parameterizable":"Yes","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"1 mA","Between The Channels And Backplane Bus":"Yes","PROFIBUS as of GSD version/GSD revision":"GSD Revision 5","PROFINET as of GSD version/GSD revision":"GSDML V2.3","Monitoring of the supply voltage (PWR-LED)":"Yes; Green PWR LED","Performance level according to ISO 13849-1":"PL d","Limitation of inductive shutdown voltage to":"Typ. L+ (-53 V)","STEP 7 configurable/integrated as of version":"V5.5 SP3 / -","Ambient air temperature-barometric pressure-altitude":"On request: Ambient temperatures lower than 0 °C (without condensation) and/or installation altitudes greater than 2 000 m","STEP 7 TIA Portal configurable/integrated as of version":"V13 SP1 / -","Suitable for safety-related tripping of standard modules":"Yes; From FS01","Color code for module-specific color identification plate":"CC02","Between The Channels And The Power Supply Of The Electronics":"No","Isochronous operation (application synchronized up to terminal)":"No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=649128&mlfb=6ES7132-6BF00-2AA0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6BF00-2AA0/alternatives.json"},"ai":{"faq":[{"question":"Does 6ES7132-6BF00-2AA0 support PWM or oversampling?","answer":"No — the module has no PWM or oversampling capability. It is a standard DQ module for on/off switching only."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-6BF00-2AA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-6BF00-2AA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}