{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-6FD00-0CU0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-6FD00-0CU0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-6FD00-0CU0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6FD00-0CU0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200SP, 6ES7132-6FD00-0CU0, digital output module, DQ, current-sourcing, 8 outputs, 20 mm width, BU type U0, rated 230V AC, 8 A max.","salesMarkdown":"The Siemens 6ES7132-6FD00-0CU0 is a current-production ET 200SP digital output module. It delivers 8 current-sourcing outputs (DQ) rated for 24 V AC to 230 V AC, each switched via phase control with a control range of 8.5% to 100% of the phase angle. The module is 20 mm wide and mounts on a BU type U0 base unit, which handles the 1-wire, 2-wire, or 3-wire connection scheme depending on the potential distributor. ## Derating and thermal limits Output current is temperature-dependent: 8 A per channel up to 30 °C, 6 A up to 40 °C, and 4 A up to 50 °C. For a 50 °C panel, figure 4 A maximum per output — no headroom for parallel tie unless you respect the package dissipation of 9 W typ at full load on 230 V AC. Unshielded cable runs up to 600 m; shielded max 1 000 m. Wire-break detection and diagnostic alarm are built in. ## Sourcing and compatibility For a BOM freeze, this is a stable line. No PCN or LTB activity. Firmware updates are supported, and the module carries I&M data 0 through 3 for asset tracking.","metaTitle":"Siemens 6ES7132-6FD00-0CU0 ET 200SP DQ Module, 20mm, 24-230V","metaDescription":"Active production. 8-channel digital output, phase control, diagnostic alarm, wire-break detection. Up to 8A/6A/4A derated. BU type U0 base unit. Sourced per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"DQ":"Yes","MSO":"No","PWM":"No","Depth":"58 mm","Width":"20 mm","title":"6ES7132-6FD00-0CU0","Height":"73 mm","Inputs":"+ 1 byte for QI information","Outputs":"8 byte","I&M data":"Yes; I&M0 to I&M3","Full-wave":"Yes","Half-wave":"Yes","Wire-break":"Yes; channel by channel","Group error":"Yes","description":"SIMATIC ET 200SP, digital output module DQ 4x 24..230V AC/2A HF packaging unit: 1 piece, two alternative modes: DQ and power control, fits to BU-Type U0, color code CC20, channel diagnosis","For Uprating":"No","Oversampling":"No","Phase control":"Yes; Control area: 8.5 ... 100% of the phase angle","Short-circuit":"No","Shielded, Max.":"1 000 m","Current-sinking":"No","For Logic Links":"No","Weight, approx.":"50 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"40 ms; 2 AC cycles","\"1\" To \"0\", Max.":"20 ms; 1 AC cycle","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Isochronous mode":"No","Power loss, typ.":"9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz","Rated value (AC)":"230 V; 24V AC to 230V AC","Unshielded, Max.":"600 m","usable BaseUnits":"BU type U0","1-Wire Connection":"BU type U0","2-Wire Connection":"BU type U0","3-Wire Connection":"BU type U0 + Potential distributor module","Automatic encoding":"Yes","FW update possible":"Yes","On Lamp Load, Max.":"1 Hz; Applies to DQ mode; limited by line frequency in PC mode","up to 30 °C, max.":"8 A","up to 40 °C, max.":"6 A","up to 50 °C, max.":"4 A","up to 60 °C, max.":"4 A","Overload protection":"No; A miniature fuse with 10 tripping current and tripping characteristic \"quick response\" must be provided in the module supply","Trailing-edge phase":"No","Between The Channels":"No","Diagnostics function":"Yes","For Signal \"1\", Min.":"20.4 V","HW functional status":"From FS03","Isolation tested with":"2 545 V DC/2 s (routine test)","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Open-circuit detection":"Yes; channel by channel","Type of digital output":"Triac","For Channel Diagnostics":"Yes; red Fn LED","Current per module, max.":"8 A","Response threshold, typ.":"1 mA; 40 V AC or more","Short-circuit protection":"No; external fusing necessary","Current per channel, max.":"2 A; Max. 4 A, see additional description in manual","Mechanical coding element":"Yes","Number of digital outputs":"4","With Inductive Load, Max.":"2 A","With Resistive Load, Max.":"10 Hz; Applies to DQ mode; limited by line frequency in PC mode","For Signal \"1\" Rated Value":"2 A","Controlling a digital input":"Yes","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"-30 °C","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"-30 °C","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","DQ with energy-saving function":"Yes","Diagnostic information readable":"Yes","For Redundant Control Of A Load":"Yes","Digital outputs, parameterizable":"Yes","Current consumption (rated value)":"8 mA; without load","Type of mechanical coding element":"type C","permissible range, lower limit (AC)":"20.4 V","permissible range, upper limit (AC)":"264 V","For Signal \"0\" Residual Current, Max.":"3 mA","Between The Channels And Backplane Bus":"Yes","For Signal \"1\" Permissible Range, Max.":"4 A; note derating data in the manual","For Signal \"1\" Permissible Range, Min.":"10 mA","PROFIBUS from GSD version/GSD revision":"GSD as of Revision 5","PROFINET from GSD version/GSD revision":"GSDML V2.3","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Installation altitude above sea level, max.":"2 000 m; On request: Installation altitudes greater than 2 000 m","STEP 7 configurable/integrated from version":"STEP 7 V5.5 or higher","STEP 7 TIA Portal configurable/integrated from version":"V14","Color code for module-specific color identification plate":"CC20","Between The Channels And The Power Supply Of The Electronics":"No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$149.86 – $443.85","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/45408fd720a60ef3919e3ed53e45fa9a.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1090917&mlfb=6ES7132-6FD00-0CU0"},"ai":{"faq":[{"question":"What does DQ = Yes mean for this module?","answer":"DQ (digital output) rated Yes means it switches AC loads up to 230 V AC via phase control, current-sourcing topology."},{"question":"Will this module fit into a panel originally wired for a 6ES7522-5HH00-0AB0?","answer":"No. The 6ES7132-6FD00-0CU0 uses the ET 200SP BU type U0 base unit, while the 6ES7522 uses the S7-1500 form factor with a different base bus. Physical and electrical interfaces are incompatible."},{"question":"Does the module support phase control and diagnostics?","answer":"Yes. Phase control covers 8.5% to 100% of the phase angle. Diagnostic alarm and wire-break detection per channel are built in."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-6FD00-0CU0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-6FD00-0CU0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}