{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-6GD51-0BA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-6GD51-0BA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-6GD51-0BA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6GD51-0BA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200SP digital output module, 6ES7132-6GD51-0BA0, relay type, 24 V DC, 8 A max at 30 °C, 15 mm wide, BU type A0 base unit.","salesMarkdown":"The Siemens 6ES7132-6GD51-0BA0 is an ET 200SP digital output module with relay-type outputs, rated at 24 V DC and delivering up to 8 A per channel at 30 °C, derated to 6 A at 40 °C, and 4 A at both 50 °C and 60 °C. It occupies a single 15 mm-wide slice on the ET 200SP backplane and requires a BU type A0 base unit. The module supports diagnostic alarms and channel-status indication via a green LED per channel and a green/red DIAG LED for module diagnostics, making it suitable for applications where load current needs to be switched reliably in a compact IP20-rated control cabinet. The headline current rating of 8 A at 30 °C is the maximum per channel for resistive loads; as ambient temperature rises to 40 °C, the continuous current drops to 6 A, and at 50 °C or 60 °C it settles at 4 A. This derating curve means the module can handle moderate motor-starter or valve loads in a warm cabinet, but if your panel runs above 40 °C, plan for the lower limit. The relay output type provides galvanic isolation between channels and the backplane, which helps with noise immunity in mixed-signal environments — useful near drives or contactors. Diagnostic alarms and channel-status green LEDs give the commissioning engineer immediate feedback on output state without needing a handheld meter. The module snaps onto an ET 200SP BU type A0 base unit, which provides the backplane bus connection and mechanical support. At 15 mm wide, it fits into standard DIN-rail-mounted I/O racks; the 58 mm depth and 73 mm height leave clearance for wiring ducts and cable trays. The base unit handles the wiring termination — no screw terminals on the module itself. Automatic encoding ensures the base unit identifies the module type without DIP-switch setting.","metaTitle":"Siemens 6ES7132-6GD51-0BA0 ET 200SP Digital Output Module, 8","metaDescription":"Siemens 6ES7132-6GD51-0BA0 ET 200SP digital output module, relay type, 24 V DC, 8 A/6 A/4 A derated by temp, diagnostic alarm, active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"DQ":"Yes","MSO":"No","PWM":"No","Depth":"58 mm","Width":"15 mm","Height":"73 mm","Inputs":"+ 1 byte for QI information","Outputs":"1 byte","I&M data":"Yes; I&M0 to I&M3","Wire-break":"No","For Uprating":"No","Oversampling":"No","Short-circuit":"No","Shielded, Max.":"1 000 m","Current-sinking":"Yes","For Logic Links":"Yes","Weight, approx.":"30 g","lifecycle_stage":"current","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Firmware version":"V0.0","Isochronous mode":"No","Power loss, typ.":"1.2 W","Rated value (DC)":"24 V","Unshielded, Max.":"200 m","usable BaseUnits":"BU type A0","Automatic encoding":"Yes","FW update possible":"No","up to 30 °C, max.":"8 A","up to 40 °C, max.":"6 A","up to 50 °C, max.":"4 A","up to 60 °C, max.":"4 A","Between The Channels":"Yes","Diagnostics function":"Yes","HW functional status":"From FS02","Isolation tested with":"707 V DC (type test)","Redundancy capability":"Yes","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Type of digital output":"Relays","For Channel Diagnostics":"No","Number of relay outputs":"4","Switching current, min.":"1 mA; 5 V DC","Current per module, max.":"8 A","Short-circuit protection":"No","Current per channel, max.":"2 A","Mechanical coding element":"Yes","Number of digital outputs":"4","With Resistive Load, Max.":"2 A","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"-30 °C","Rated switching voltage (AC)":"24 V","Rated switching voltage (DC)":"24 V","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"-30 °C","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","DQ with energy-saving function":"No","For Redundant Control Of A Load":"Yes","Digital outputs, parameterizable":"Yes","Number of operating cycles, max.":"500 000","Thermal continuous current, max.":"2 A","Current consumption (rated value)":"50 mA","Type of mechanical coding element":"type C","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","Between The Channels And Backplane Bus":"Yes","PROFIBUS from GSD version/GSD revision":"One GSD file each, Revision 3 and 5 and higher","PROFINET from GSD version/GSD revision":"GSDML V2.3","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Rated supply voltage of relay coil L+ (DC)":"24 V","Installation altitude above sea level, max.":"2 000 m; On request: Installation altitudes greater than 2 000 m","STEP 7 configurable/integrated from version":"V5.5 SP3","STEP 7 TIA Portal configurable/integrated from version":"V14","Color code for module-specific color identification plate":"CC00","Between The Channels And The Power Supply Of The Electronics":"Yes","Current consumption of relays (coil current of all relays), max.":"40 mA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$39.09","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7d534f24c6ed21d6bac55056596d3ac1.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1075401&mlfb=6ES7132-6GD51-0BA0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7132-6GD51-0BA0/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy 6ES7132-6GD51-0BA0 and what is the price?","answer":"We source and quote this module to order against an RFQ. Availability and current pricing are confirmed at quote time — no price or stock figures are listed here because they change with the market. Submit an RFQ for a firm quote."},{"question":"What is the maximum current per channel at different temperatures?","answer":"At 30 °C the module delivers 8 A per channel, derated to 6 A at 40 °C, and 4 A at both 50 °C and 60 °C (–). This derating applies to continuous load; plan your wiring and load accordingly for the expected cabinet temperature."},{"question":"Does 6ES7132-6GD51-0BA0 support diagnostic alarms?","answer":"Yes, the module generates diagnostic alarms and has a green/red DIAG LED for module diagnostics. Per-channel status is indicated by a green LED. These features help fault isolation without a programming tool."},{"question":"What base unit does this module require?","answer":"It requires an ET 200SP BU type A0 base unit. The base unit provides the backplane connection, mechanical mounting, and wiring terminals. The module snaps onto it and is automatically encoded."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-6GD51-0BA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-6GD51-0BA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}