{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-7RD20-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-7RD20-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-7RD20-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-7RD20-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC DP electronics module for ET200iSP, 6ES7132-7RD20-0AB0, 4 DQ 17.4 V DC/40 mA with diagnostic alarm and wire-break detection.","salesMarkdown":"The Siemens 6ES7132-7RD20-0AB0 is a SIMATIC DP electronics module for the ET200iSP distributed I/O system. It provides 4 digital outputs at 17.4 V DC, each rated for 40 mA with the ability to parallel outputs for 80 mA when uprating is enabled. ## Outputs and current handling Each channel sinks 40 mA continuous; parallel operation boosts that to 80 mA total across the paralleled outputs. The internal resistor sits at 150 Ω and the no-load voltage at 17.4 V DC. Switching frequency is 100 Hz with resistive loads, 2 Hz with inductive loads. Short-circuit detection thresholds shift between single-output mode (R < 800 Ω) and parallel mode (R < 40 Ω). Wire-break alarm triggers when load resistance exceeds 10 kΩ or sink current drops below 100 µA. ## Diagnostics and status A parameterizable diagnostic alarm reports group faults (SF red LED) and per-channel status via green LED. Diagnostic information is readable over the backplane bus. No channel-to-channel isolation, but circuits are isolated from backplane bus and load voltage L+ at 60 V DC/30 V AC. ## Power and loading Typical current draw from the backplane is 380 mA; power loss is 2.8 W. The module consumes up to 400 mA from load voltage L+ when unloaded. These numbers must be accounted for in the ET200iSP station's power budget.","metaTitle":"Siemens 6ES7132-7RD20-0AB0 SIMATIC DP Module, 4 DQ 17.4V/40m","metaDescription":"Siemens 6ES7132-7RD20-0AB0 SIMATIC DP electronics module for ET200iSP: 4 digital outputs, 17.4 V DC / 40 mA per channel, diagnostic alarm, wire-break detection. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Digital Output Modules"],"specifications":{"Depth":"136.5 mm","Width":"30 mm","Alarms":"No","Height":"129 mm","CE mark":"Yes","Current Ie":"40 mA; 80 mA when outputs connected in parallel","Wire-break":"Yes; R > 10 kohms, I < 100 µA","For Uprating":"Yes","Short-circuit":"Yes; R< 800 ohms (one output), R< 40 ohms (outputs connected in parallel)","Shielded, Max.":"200 m","Voltage Ue (DC)":"11 V","Weight, approx.":"255 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"2 ms","\"1\" To \"0\", Max.":"1.5 ms","Diagnostic alarm":"Yes; Parameterizable","Power loss, typ.":"2.8 W","Unshielded, Max.":"200 m","Between The Channels":"No","Group error SF (red)":"Yes","Internal resistor Ri":"150 Ω","No-load voltage Uao (DC)":"17.4 V","Current consumption, typ.":"380 mA","Number of digital outputs":"4","With Inductive Load, Max.":"2 Hz","With Resistive Load, Max.":"100 Hz","Between Different Circuits":"60 V DC/30 V AC","Diagnostic information readable":"Yes","Type of protection acc. to KEMA":"04 ATEX 1249","Between The Channels And Backplane Bus":"Yes","Status indicator digital output (green)":"Yes; Per channel","Between the channels and load voltage L+":"Yes","from load voltage L+ (without load), max.":"400 mA","Type of protection acc. to EN 50020 (CENELEC)":"II2 G (1) GD EEx ib[ia] IIC T4"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$318.77","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=136900&mlfb=6ES7132-7RD20-0AB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7132-7RD20-0AB0/alternatives.json"},"ai":{"faq":[{"question":"What are the key output ratings for the 6ES7132-7RD20-0AB0?","answer":"4 digital outputs at 17.4 V DC, each 40 mA, up to 80 mA when outputs are paralleled with uprating enabled."},{"question":"What is the physical size of the 6ES7132-7RD20-0AB0?","answer":"Width 30 mm, height 129 mm, depth 136.5 mm, weight approx. 255 g."},{"question":"Does the module support diagnostic alarms?","answer":"Yes, a parameterizable diagnostic alarm, per-channel status indicators, wire-break and short-circuit detection are all supported."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-7RD20-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-7RD20-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}