{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-7RD22-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-7RD22-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-7RD22-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-7RD22-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC DP ET 200S digital output module, 4 transistor outputs rated 0.04 A at 10.7 V DC plus 1 intrinsically-safe input for H shutdown, 30 mm wide, current production stage.","salesMarkdown":"## Module identity and I/O footprint The Siemens 6ES7132-7RD22-0AB0 is an ET 200S distributed I/O digital output module: four transistor outputs and one additional intrinsically-safe input reserved for an H shutdown function, mounted on the SIMATIC DP backplane as a 30 mm slice. Each output is rated 0.04 A at 10.7 V DC, and two outputs may be paralleled on a single channel group to draw 80 mA from the same load-voltage rail — useful when driving a higher-current valve coil or a paired indicator loop within the IS boundary. The four outputs share a common load-voltage L+; channels are isolated from the backplane bus and from L+, but not from each other within a group, so the wiring diagram has to treat paired channels as one potential. Lifecycle stage on this order code is current per the spec row, which means the part is still specified into new SIMATIC DP stations and remains a live BOM line rather than a last-time-buy. ## Intrinsically-safe output stage The output stage is designed for hazardous-area field devices, with Uo capped at 19.4 V, Io at 118 mA, internal resistance Ri of 167 Ω, and Po at 572 mW — the same set of limits an integrator cross-checks against the Ex certificate of the field valve or indicator being driven. Permissible external capacitance Co is 241 nF for Group IIC installations and 1507 nF for Group IIB, so cable runs plus device input capacitance must be summed against the right group figure before the loop is accepted. Shielded and unshielded field cables are both listed to a maximum of 500 m, which is the practical field-cable length ceiling on a hazardous-area segment terminated to this module. ## Switching behavior and timing With inductive loads the maximum switching frequency drops to 2 Hz — anything faster on a coil has to be checked against the de-rating curve, not the headline 100 Hz figure. ## Diagnostics, faults, and field-side monitoring The module detects both short-circuit and wire-break on the field loop, with wire-break declared above 10 kΩ / below 100 µA and short-circuit flagged at less than 80 Ω on a single output or less than 40 Ω when two outputs are paralleled, and a parameterizable diagnostic alarm surfaces the event on the group-error SF LED. Per-channel green status LEDs give the on-site electrician a channel-level view without opening the diagnostic buffer, and the diagnostic information is also readable over the backplane for HMI-side trending. The module is not classified to SIL per the spec row, so a separate SIL-rated path is required for any safety function. ## Power budget and mechanical envelope Typical current consumption from the backplane is 380 mA, and the load-voltage L+ feed can draw up to 400 mA from the segment supply when the outputs are idle; typical power dissipation inside the module is 2.8 W, so the station power budget should leave headroom for neighboring slices. The module carries a CE mark, which covers the EU declaration of conformity for the assembled station. ## Sourcing and station context Because the lifecycle stage reads current, this order code is the one to specify into a new ET 200S station rather than reaching for a phased-out alternative; the spec row also flags it as suitable for uprating, which matters when the panel is being re-validated for a higher-horsepower downstream device. For the integrator assembling an ET 200S station, address space per module tops out at 2 byte, which is consistent with a four-output slice plus the one H-shutdown input, and the whole slice is configured through the standard ET 200S parameterization — no extra GSD file work is implied beyond the normal station bring-up. For procurement, this is a live BOM line; request a quote against the exact 6ES7132-7RD22-0AB0 order code so the station configuration and hazardous-area loop calculations stay matched to the as-installed hardware.","metaTitle":"Siemens 6ES7132-7RD22-0AB0 DO module, 4 outputs, 0.04 A","metaDescription":"Siemens 6ES7132-7RD22-0AB0 ET 200S digital output, 4 transistor DO at 10.7 V DC / 0.04 A with one IS H-shutdown input. Sourced to RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"Depth":"136.5 mm","Width":"30 mm","title":"6ES7132-7RD22-0AB0","Height":"129 mm","CE mark":"Yes","Current Ie":"40 mA; 80 mA when outputs connected in parallel","Wire-break":"Yes; R > 10 kohms, I < 100 µA","description":"SIMATIC DP, electronic module for ET200iSP, 4 DQ, 17.4 V DC/40 mA \"H\"-shutdown, Ex ib (ia Ga) IIC T4 Gb, Ex ib [ia IIIC Da] IIC T4 Gb, Ex ib [ia] I Mb","For Uprating":"Yes","Short-circuit":"Yes; R< 80 Ohm (one output), R< 40 Ohm (outputs connected in parallel)","Shielded, Max.":"500 m","Voltage Ue (DC)":"10.7 V","Weight, approx.":"255 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"2 ms","\"1\" To \"0\", Max.":"1.5 ms","Diagnostic alarm":"Yes; Parameterizable","Power loss, typ.":"2.8 W","Unshielded, Max.":"500 m","Between The Channels":"No","Group error SF (red)":"Yes","Internal resistor Ri":"167 Ω","SIL acc. to IEC 61508":"No","Type of digital output":"Transistor","Po (power output), max.":"572 mW","No-load voltage Uao (DC)":"17.4 V","Short-circuit protection":"Yes","Current consumption, typ.":"380 mA","Number of digital outputs":"4; additionally 1 intrinsically-safe input for H shutdown","With Inductive Load, Max.":"2 Hz","With Resistive Load, Max.":"100 Hz","Between Different Circuits":"60 V DC/30 V AC","For Signal \"1\" Rated Value":"0.04 A","Uo (no-load voltage), max.":"19.4 V","Address space per module, max.":"2 byte","Diagnostic information readable":"Yes","Io (short-circuit current), max.":"118 mA","Between The Channels And Backplane Bus":"Yes","Status indicator digital output (green)":"Yes; Per channel","Between the channels and load voltage L+":"Yes","Co (permissible external capacity), max.":"241 nF; For IIC, 1507 nF for IIB","from load voltage L+ (without load), max.":"400 mA","Lo (permissible external inductivity), max.":"1.7 mH; For IIC, 10.4 mH for IIB"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$361.95 – $741.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=367161&mlfb=6ES7132-7RD22-0AB0"},"ai":{"faq":[{"question":"What does the 6ES7132-7RD22-0AB0 actually do?","answer":"It is a four-channel transistor digital output module for ET 200S, each output rated 0.04 A at 10.7 V DC, with a fifth intrinsically-safe input reserved for an H shutdown signal."},{"question":"What is the listed depth of 6ES7132-7RD22-0AB0?","answer":"The depth figure is 136.5 mm, matching the standard ET 200S slice depth so the module fits the usual terminal-module cavity on the DIN rail."},{"question":"What is the listed width of 6ES7132-7RD22-0AB0?","answer":"The width is 30 mm, which is the standard 30 mm slice width used across the ET 200S DO family."},{"question":"What hazardous-area limits apply to the output stage?","answer":"The IS output stage is bounded by Uo 19.4 V, Io 118 mA, Ri 167 Ω, Po 572 mW, and Co of 241 nF for Group IIC or 1507 nF for Group IIB — these are the figures the field-device Ex certificate has to be checked against."},{"question":"Does the module carry CE marking?","answer":"Yes, the spec row carries a CE mark, covering the EU declaration of conformity for the assembled station."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-7RD22-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-7RD22-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}