{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7134-4JD00-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7134-4JD00-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7134-4JD00-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7134-4JD00-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200S, 4AI TC, 4 analog inputs for thermocouples, 15 x 81 x 52 mm, 24 V DC from power module, 0.6 W.","salesMarkdown":"## Thermocouple input coverage and filtering The Siemens 6ES7134-4JD00-0AB0 is a 4-channel analog input module for the ET 200S system, accepting thermocouple types B, E, J, K, L, N, R, S, and T. Each channel is parameterizable with four stages of digital filtering (none, low, medium, high) that multiply the cycle time by 1×, 4×, 32×, or 64× respectively, letting you trade noise rejection against update speed per loop. Wire-break diagnostics are available for thermocouple inputs only — the module detects an open circuit on the sensor wire and can trigger a group error (SF LED) or be disabled per channel. ## Integration into ET 200S station The module snaps onto the DIN rail within an ET 200S station, occupying a 15 mm wide slice — the narrowest footprint for a 4-channel TC input, leaving room for power modules and digital slices in the same rail. Rated 24 V DC supplied from the ET 200S power module via the backplane bus; typical power loss is 0.6 W, so no additional heat derating is needed in a standard IP20 enclosure. Shielded thermocouple cable runs up to 50 m are supported; the module provides isolation tested at 500 V DC between channels and the backplane. ## Measurement modes and resolution The module uses an integrating measurement principle with a selectable integration time of 16.7 ms or 20 ms — matching 60 Hz or 50 Hz line cycles to reject mains-frequency interference. It also supports voltage measurement in the range -80 mV to +80 mV, which covers the millivolt output of any thermocouple at typical process temperatures. The comparison point (cold-junction compensation) can be set to none (internal) or to one of up to eight external RTD references, allowing compensation at the terminal block rather than the module.","metaTitle":"Siemens 6ES7134-4JD00-0AB0 ET 200S 4AI TC, 15 mm","metaDescription":"Siemens 6ES7134-4JD00-0AB0 ET 200S analog input module, 4 channels for thermocouples B/E/J/K/L/N/R/S/T, 15 mm wide, current lifecycle stage, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLC I/O & Expansion Modules"],"specifications":{"Depth":"52 mm","Width":"15 mm","Height":"81 mm","Remark":"4 byte","Type B":"Yes","Type E":"Yes","Type J":"Yes","Type K":"Yes","Type L":"Yes","Type N":"Yes","Type R":"Yes","Type S":"Yes","Type T":"Yes","Step: low":"Yes; 4x cycle time","Step: High":"Yes; 64x cycle time","Step: None":"Yes; 1x cycle time","Wire-break":"Yes; A break in the wire is only detected for thermocouples","Group error":"Yes","Step: Medium":"Yes; 32x cycle time","Shielded, Max.":"50 m","Parameterizable":"Yes; In four stages by means of digital filtering","Weight, approx.":"40 g","lifecycle_stage":"current","-80 mV to +80 mV":"Yes","Comparison point":"none / RTD","Isochronous mode":"No","Power loss, typ.":"0.6 W","Rated value (DC)":"24 V; From power module","Group diagnostics":"Disable / enable","Overflow/underflow":"Disable / enable","Between The Channels":"No","Group error SF (red)":"Yes","Integration time (ms)":"16,7 / 20 ms","Isolation tested with":"500 V DC","Measurement principle":"integrating","Diagnostics wire break":"Disable / enable (wire break is detected only in thermocouples)","Comparison point number":"None / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8","For Voltage Measurement":"Yes","Number of analog inputs":"4","Input resistance (Type B)":"1 MΩ","Input resistance (Type E)":"1 MΩ","Input resistance (Type K)":"1 MΩ","Input resistance (Type L)":"1 MΩ","Input resistance (Type N)":"1 MΩ","Input resistance (Type R)":"1 MΩ","Input resistance (Type S)":"1 MΩ","Input resistance (Type T)":"1 MΩ","Input resistance (type J)":"1 MΩ","Reverse polarity protection":"Yes","Conversion time (per channel)":"65 ms; 55 / 65 ms (additional 20 ms on activated wire-break test)","Address space per module, max.":"8 byte","Cycle time (all channels) max.":"Number of active channels per module x basic conversion time","Diagnostic information readable":"Yes","Integration time, parameterizable":"Yes","Internal Temperature Compensation":"Not possible","from backplane bus 3.3 V DC, max.":"10 mA","Input resistance (-80 mV to +80 mV)":"1 MΩ","Between The Channels And Backplane Bus":"Yes","Voltage, relative to input range, (+/-)":"0.4 %","Between the channels and load voltage L+":"Yes","from load voltage L+ (without load), max.":"30 mA","Resolution with overrange (bit including sign), max.":"16 bit; 15 bit + sign","Technical unit for temperature measurement adjustable":"No; Celsius","External Temperature Compensation With Compensations Socket":"Yes; possible, one external compensating box per channel","Interference voltage suppression for interference frequency f1 in Hz":"50 / 60 Hz","Permissible Input Voltage For Voltage Input (Destruction Limit), Max.":"10 V; Permanent"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$261.75","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=430186&mlfb=6ES7134-4JD00-0AB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7134-4JD00-0AB0/alternatives.json"},"ai":{"faq":[{"question":"What thermocouple types does 6ES7134-4JD00-0AB0 support?","answer":"The module supports thermocouple types B, E, J, K, L, N, R, S, and T — nine common types covering most industrial temperature ranges."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7134-4JD00-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7134-4JD00-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}