{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7134-6HD00-0BA1","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7134-6HD00-0BA1","canonicalUrl":"https://aoctrl.com/siemens/6ES7134-6HD00-0BA1","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7134-6HD00-0BA1","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200SP analog input module, 6ES7134-6HD00-0BA1, 4 AI, 15/16-bit resolution, 24 V DC supply, 15 mm wide.","salesMarkdown":"## What this 4-channel analog input module handles The Siemens 6ES7134-6HD00-0BA1 is an ET 200SP analog input module that takes four channels of voltage or current signals and converts them with 15- or 16-bit resolution, depending on the range. It accepts 0 to 10 V, 0 to 20 mA, 4 to 20 mA, 1 to 5 V, ±5 V, and ±10 V — the ± ranges resolve to 16 bits including sign, the unipolar ranges to 15 bits. ## Diagnostics and fault detection on the line This module detects wire-break on 4 to 20 mA loops — a common failure mode in field wiring that otherwise looks like a valid zero-signal reading. It also detects short-circuits on 1 to 5 V inputs and on the encoder supply in 2-wire mode. A diagnostic alarm fires on group errors, and the module reports overflow/underflow conditions. Channel status is shown by a green LED per channel; a green/red bicolor LED indicates module diagnostics. Isolation between channel groups is tested at 707 V DC type test. The module also supports I&M data (I&M0 to I&M3) for asset tracking in the TIA Portal environment. ## Physical fit and BaseUnit pairing The module is 15 mm wide, 73 mm high, and 58 mm deep — it occupies one slot width in an ET 200SP station. It mates with BU type A0 or A1 BaseUnits, which carry the wiring terminals and determine the field-wiring pitch. Maximum cable length is 1 000 m shielded for current loops, reduced to 200 m for voltage measurements. The module supports automatic encoding for slot identification and allows firmware updates in the field.","metaTitle":"Siemens 6ES7134-6HD00-0BA1 Analog Input Module, 4 AI","metaDescription":"Siemens ET 200SP analog input module 6ES7134-6HD00-0BA1. 4 channels, 15/16-bit resolution, 24 V DC supply. Active production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Analog Input Modules"],"specifications":{"MSI":"No","24 V":"Yes","Depth":"58 mm","Width":"15 mm","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","0 to +10 V":"Yes; 15 bit","0 to 20 mA":"Yes; 15 bit","1 V to 5 V":"Yes; 15 bit","Wire-break":"Yes; at 4 to 20 mA","Group error":"Yes","-5 V to +5 V":"Yes; 16 bit incl. sign","Oversampling":"No","4 mA to 20 mA":"Yes; 15 bit","Short-circuit":"Yes; with 1 to 5 V or 2-wire mode: Short-circuit of the encoder supply to ground or of an input to the encoder supply","-10 V to +10 V":"Yes; 16 bit incl. sign","Shielded, Max.":"1 000 m; 200 m for voltage measurement","Parameterizable":"Yes","Weight, approx.":"31 g","lifecycle_stage":"current","Diagnostic alarm":"Yes","Firmware version":"V1.1","Isochronous mode":"No","Power loss, typ.":"0.85 W; Without encoder supply voltage","Rated value (DC)":"24 V","usable BaseUnits":"BU type A0, A1","Limit value alarm":"No","Automatic encoding":"Yes","FW update possible":"Yes","Overflow/underflow":"Yes","Between The Channels":"Yes; channel group-specific between 2-wire current input group and voltage input group","Output current, max.":"20 mA; max. 50 mA per channel for a duration < 10 s","Isolation tested with":"707 V DC (type test)","Measurement principle":"integrating (Sigma-Delta)","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red LED","For Channel Diagnostics":"No","For Voltage Measurement":"Yes","For current measurement":"4","For voltage measurement":"4","Number of analog inputs":"4; Differential inputs","Measuring range scalable":"No","Short-circuit protection":"Yes","between the inputs (UCM)":"10 V DC","Common mode voltage, max.":"10 V","Current consumption, max.":"37 mA; without sensor supply","Mechanical coding element":"Yes","Number of smoothing levels":"4; None; 4/8/16 times","Calibration possible in RUN":"No","Reverse polarity protection":"Yes","Input resistance (0 to 10 V)":"120 kΩ","Conversion time (per channel)":"180 / 60 / 50 ms","Input resistance (0 to 20 mA)":"100 Ω; + approx. 0.7 V diode forward voltage","Input resistance (1 V to 5 V)":"120 kΩ","Monitoring the supply voltage":"Yes","Address space per module, max.":"8 byte; + 1 byte for QI information","Common mode interference, min.":"90 dB","Cycle time (all channels), min.":"Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels)","Input resistance (-5 V to +5 V)":"120 kΩ","Input resistance (4 mA to 20 mA)":"100 Ω; + approx. 0.7 V diode forward voltage","Input resistance (-10 V to +10 V)":"120 kΩ","Integration time, parameterizable":"Yes","Type of mechanical coding element":"Type A","Burden of 2-wire transmitter, max.":"650 Ω","Crosstalk between the inputs, min.":"50 dB","Reparameterization possible in RUN":"Yes","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","Between The Channels And Backplane Bus":"Yes","PROFIBUS from GSD version/GSD revision":"GSD Revision 5","PROFINET from GSD version/GSD revision":"GSDML V2.3","Current, relative to input range, (+/-)":"0.3 %","Voltage, relative to input range, (+/-)":"0.3 %","Monitoring of the supply voltage (PWR-LED)":"Yes; green LED","PCS 7 configurable/integrated from version":"V8.1 SP1","STEP 7 configurable/integrated from version":"V5.5 SP3 / -","For Current Measurement As 2-Wire Transducer":"Yes","For Current Measurement As 4-Wire Transducer":"No","Linearity error (relative to input range), (+/-)":"0.01 %","Temperature error (relative to input range), (+/-)":"0.005 %/K","Resolution with overrange (bit including sign), max.":"16 bit","STEP 7 TIA Portal configurable/integrated from version":"V11 SP2 / V13","Color code for module-specific color identification plate":"CC03","Between The Channels And The Power Supply Of The Electronics":"Yes; only for voltage inputs","Interference voltage suppression for interference frequency f1 in Hz":"16.6 / 50 / 60 Hz","Permissible Input Current For Current Input (Destruction Limit), Max.":"50 mA","Permissible Input Voltage For Voltage Input (Destruction Limit), Max.":"30 V","Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)":"0.05 %","Series mode interference (peak value of interference < rated value of input range), min.":"70 dB"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$340.36 – $353.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=48690&mlfb=6ES7134-6HD00-0BA1","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7134-6HD00-0BA1/alternatives.json"},"ai":{"faq":[{"question":"What BaseUnits are compatible with 6ES7134-6HD00-0BA1?","answer":"It fits BU type A0 and A1 BaseUnits in the ET 200SP system."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7134-6HD00-0BA1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7134-6HD00-0BA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}