{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7135-0HF01-0XB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7135-0HF01-0XB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7135-0HF01-0XB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7135-0HF01-0XB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200M analog output module, 6ES7135-0HF01-0XB0, 4 channels, PROFIBUS DP, 12 Mbit/s, 24 VDC, 0 to 10 V / 0 to 20 mA / 4 to 20 mA / -10 V to +10 V.","salesMarkdown":"The 6ES7135-0HF01-0XB0 is a current-production Siemens ET 200M analog output module with four individually configurable channels. Each channel can source 0 to 10 V, 0 to 20 mA, 4 to 20 mA, or -10 V to +10 V, covering the standard industrial signal ranges for driving valves, VFD speed references, and chart recorders. It communicates over PROFIBUS DP at up to 12 Mbit/s, which sets the bus cycle time floor for the remote rack. The 1 ms conversion time per channel means a four-channel update takes 4 ms — budget this into the control loop if the outputs are part of a fast-acting cascade. ## Supply and load constraints for the commissioning engineer Rated 24 VDC with a permissible range of 18.5 V to 30.2 V; the module draws 200 mA from the logic supply. The 24 V rail must hold above 18.5 V even under transient load — a sagging supply will drop the analog outputs out of specification before the logic faults. For current outputs, the maximum load is 300 Ω; for voltage outputs, the module drives two-wire or four-wire connections. The no-load voltage on current outputs is capped at 18 V, so the loop power is limited to passive transmitters — active loop-powered devices need a separate supply. Crosstalk between adjacent outputs is at least 40 dB — adequate for most process signals but worth noting if two channels share a common return and one swings rail-to-rail while the other is at 1 % of span.","metaTitle":"Siemens 6ES7135-0HF01-0XB0 PROFIBUS DP Analog Output Module","metaDescription":"Siemens 6ES7135-0HF01-0XB0 analog output module, 4 channels, PROFIBUS DP, 12 Mbit/s, 24 VDC, 0-10V/0-20mA/4-20mA/-10V to +10V. Current lifecycle status.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Analog Output Modules"],"specifications":{"Depth":"60 mm; EB and TB","Width":"160 mm; EB and TB","Height":"130 mm; EB and TB","RUN LED":"Yes","0 to 10 V":"Yes","0 to 20 mA":"Yes","4 mA to 20 mA":"Yes","-10 V to +10 V":"Yes","Shielded, Max.":"100 m","Operation, max.":"95 %; RH class 2 in accordance with IEC 1131-2","Operation, min.":"15 %","Weight, approx.":"550 g; EB and TB","lifecycle_stage":"current","Diagnostic alarm":"Yes; Parameterizable","Power loss, typ.":"2.4 W","Rated value (DC)":"24 V; Value at t < 0.5 s: 35 V","Bus fault BF (red)":"Yes","For Inductive Load":"0.5 ms","For Resistive Load":"0.1 ms","For Capacitive Load":"3.3 ms","Usable terminal block":"TB8","Transmission rate, max.":"12 Mbit/s","Number of analog outputs":"4","Current consumption, max.":"200 mA; Logic","With Current Outputs, Max.":"300 Ω","Conversion time (per channel)":"1 ms","Horizontal Installation, Max.":"60 °C; 40°C for other mountings","Horizontal Installation, Min.":"0 °C","Permissible Range, Lower Limit":"795 hPa","Permissible Range, Upper Limit":"1 080 hPa","Bus protocol/transmission protocol":"PROFIBUS DP","tested according to IEC 60068-2-27":"Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms","Crosstalk between the outputs, min.":"40 dB","Potential separation analog outputs":"No","permissible range, lower limit (DC)":"18.5 V","permissible range, upper limit (DC)":"30.2 V","Current output, no-load voltage, max.":"18 V","For Current Output Two-Wire Connection":"Yes","For Voltage Output Two-Wire Connection":"Yes","For Voltage Output Four-Wire Connection":"Yes","Current, relative to output range, (+/-)":"0.3 %","Voltage output, short-circuit protection":"Yes; Electronic; max. 1 output in parallel","Voltage, relative to output range, (+/-)":"0.2 %","between electronic block and PROFIBUS DP":"Yes","With Current Outputs, Inductive Load, Max.":"1 mH","Voltage output, short-circuit current, max.":"25 mA","With Voltage Outputs, Capacitive Load, Max.":"1 µF","Operation, tested according to IEC 60068-2-6":"Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)","Linearity error (relative to output range), (+/-)":"0.05 %","Temperature error (relative to output range), (+/-)":"0.02 %/K","Resolution with overrange (bit including sign), max.":"11 bit; Two's complement","Design of electrical connection for the inputs and outputs":"Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection","Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)":"0.05 %","Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)":"0.05 %"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,691.64","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=511908&mlfb=6ES7135-0HF01-0XB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7135-0HF01-0XB0/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7135-0HF01-0XB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7135-0HF01-0XB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}