{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7135-4GB52-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7135-4GB52-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7135-4GB52-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7135-4GB52-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC ET 200S analog output module, 6ES7135-4GB52-0AB0, 2 channels 4-20 mA, 15 mm wide, 81x52 mm (HxL), wire-break and group diagnostics, active production.","salesMarkdown":"Siemens 6ES7135-4GB52-0AB0 is an active-production analog output module for the ET 200S distributed I/O system. It provides two 4-20 mA current outputs in a 15 mm wide slice — a slot-saver in dense ET 200S stations. Diagnostics for wire-break and group errors come onboard, so you can pinpoint a failed loop without dragging a laptop to the panel. ## Cycle time and load limits Cycle time across both channels is 250 µs — fast enough for most process loops. Each output can drive up to 500 Ω at the max compliant voltage of 18 V. Response time is a fixed 0.05 ms for resistive, inductive, or capacitive loads (–) — no tuning needed. Inductive loads can go up to 1 mH with the short TWA (time-weighted average) pulse; keep cable runs under 20 m for that 100 µs case. ## Field-service diagnostics Wire-break and group error detection are both enable/disable via parameters. The SF (red) LED flags a group fault. That’s useful when you’re on site and need to confirm which channel dropped before pulling the terminal block. Diagnostics are readable and can be grouped or per-channel depending on how you configure the error assembly. Width is 15 mm on the ET 200S DIN rail mount — two such modules occupy the same space as a standard 30 mm slice. Depth is 52 mm, height 81 mm. The 4-20 mA outputs are two-wire capable; four-wire connection is not supported. Reverse polarity protection is built in. Shielding: max 200 m standard, but drop to 20 m if using TWA 100 µs timing. Address space is 4 bytes plus 7 bytes remark.","metaTitle":"Siemens 6ES7135-4GB52-0AB0 ET 200S Analog Output, 2x 4-20 mA","metaDescription":"Active-production 6ES7135-4GB52-0AB0 analog output module for ET 200S. Two 4-20 mA channels, wire-break diagnostics, 15 mm wide. Quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLC I/O & Expansion Modules"],"specifications":{"Depth":"52 mm","Width":"15 mm","title":"6ES7135-4GB52-0AB0","Height":"81 mm","Remark":"7 byte","Wire-break":"Yes","Group error":"Yes","description":"SIMATIC DP, Electronics module for ET 200S, 2 AO I High Speed 15 mm width, +/-20mA; 16 bit, 4..20 mA; 16 bit, Cycle time 0.1 ms with SF LED (group fault)","4 mA to 20 mA":"Yes","Current, max.":"30 mA; DC","Shielded, Max.":"200 m; Max. 20 m for TWA 100 µs","Weight, approx.":"40 g","lifecycle_stage":"current","-20 mA to +20 mA":"Yes","Isochronous mode":"Yes","Power loss, typ.":"2.4 W","Rated value (DC)":"24 V","Group diagnostics":"Disable / enable","For Inductive Load":"0.05 ms","For Resistive Load":"0.05 ms","For Capacitive Load":"0.05 ms; At a load of up to 500 Ω / 100 nF and a max. cable length of 20 m","Between The Channels":"No","Group error SF (red)":"Yes","Isolation tested with":"500 V DC","Diagnostics wire break":"Disable / enable","Number of analog outputs":"2","With Current Outputs, Max.":"500 Ω","Response to CPU/master STOP":"Output current and de-energized/substitute a value/keep last value","Reverse polarity protection":"Yes","Address space per module, max.":"4 byte","Cycle time (all channels) max.":"250 µs","Diagnostic information readable":"Yes","from backplane bus 3.3 V DC, max.":"10 mA","Voltages at the outputs towards MANA":"15 V; Max. 15 V / 5 hours (higher voltages not permissible even briefly)","Current output, no-load voltage, max.":"18 V","Between The Channels And Backplane Bus":"Yes","For Current Output Two-Wire Connection":"Yes","For Current Output Four-Wire Connection":"No","Between the channels and load voltage L+":"Yes","Current, relative to output range, (+/-)":"0.1 %; Specified value applies for loads from 200 to 350 ohms, deviating basic error limits for loads up to 200 ohms and from 350 to 500 ohms with up to 0.3%","from load voltage L+ (without load), max.":"150 mA; With load","With Current Outputs, Inductive Load, Max.":"1 mH; for TWA 100µs","Resolution with overrange (bit including sign), max.":"16 bit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$456.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=422119&mlfb=6ES7135-4GB52-0AB0"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7135-4GB52-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7135-4GB52-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}