{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7135-6HD00-0BA1","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7135-6HD00-0BA1","canonicalUrl":"https://aoctrl.com/siemens/6ES7135-6HD00-0BA1","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7135-6HD00-0BA1","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 6ES7135-6HD00-0BA1, SIMATIC ET 200SP analog output module, 4 AO, U/I, 15 mm width, ±10 V 16-bit, 0-20 mA 15-bit, BU type A0/A1.","salesMarkdown":"## 4 analog outputs in a 15 mm slice The Siemens 6ES7135-6HD00-0BA1 is a 4-channel analog output module for the ET 200SP distributed I/O system. The module covers both voltage and current output ranges: ±10 V at 16-bit resolution including sign, 0 to 10 V at 15 bit, 0 to 20 mA at 15 bit, and 4 to 20 mA at 14 bit. That 16-bit ±10 V path gives you the finest step resolution for precision control loops like valve positioning or drive speed setpoints. ## Diagnostics and wiring Diagnostic alarm, group error, and per-channel wire-break and short-circuit detection are built in. The green/red DIAG LED and green channel-status LEDs give a quick visual on module health and output state without needing the TIA Portal open. It mates with BaseUnits type A0 or A1 — the same base unit family used across the ET 200SP analog and digital slices, so you don't need a special carrier for this module. Shielded cable runs up to 1000 m for current outputs, 200 m for voltage outputs. The module draws 150 mA max from the 24 V DC backplane bus and dissipates 1.5 W typical. Isolation is tested at 707 V DC type test between the channels and the backplane. The 6ES7135-6HD00-0BA1 carries I&M data (I&M0 through I&M3) and supports HW functional status from FS07. It does not support isochronous mode or oversampling, so it's not the choice for high-speed synchronized output updates in motion control applications.","metaTitle":"Siemens 6ES7135-6HD00-0BA1 Analog Output Module, 4 AO","metaDescription":"Siemens 6ES7135-6HD00-0BA1 SIMATIC ET 200SP analog output module. 4 outputs, ±10 V 16-bit, 0-20 mA 15-bit. Current lifecycle stage. Quoted per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog Output Modules"],"specifications":{"MSO":"No","Depth":"58 mm","Width":"15 mm","title":"6ES7135-6HD00-0BA1","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","0 to 10 V":"Yes; 15 bit","0 to 20 mA":"Yes; 15 bit","1 V to 5 V":"Yes; 13 bit","Wire-break":"Yes","Group error":"Yes","description":"SIMATIC ET 200SP, Analog output module, AQ 4XU/I Standard, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit, +/-0.3%","-5 V to +5 V":"Yes; 15 bit incl. sign","Oversampling":"No","4 mA to 20 mA":"Yes; 14 bit","Short-circuit":"Yes","-10 V to +10 V":"Yes; 16 bit incl. sign","Shielded, Max.":"1 000 m; 200 m for voltage output","Weight, approx.":"31 g","lifecycle_stage":"current","-20 mA to +20 mA":"Yes; 16 bit incl. sign","Diagnostic alarm":"Yes","Isochronous mode":"No","Power loss, typ.":"1.5 W","Rated value (DC)":"24 V","usable BaseUnits":"BU type A0, A1","For Inductive Load":"0.5 ms","For Resistive Load":"0.1 ms","Overflow/underflow":"Yes","For Capacitive Load":"1 ms","Between The Channels":"No","Diagnostics function":"Yes","HW functional status":"From FS07","Isolation tested with":"707 V DC (type test)","Output range scalable":"No","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","For Channel Diagnostics":"No","Voltages at the outputs":"30 V","Number of analog outputs":"4","Current consumption, max.":"150 mA","With Current Outputs, Max.":"500 Ω","With Voltage Outputs, Min.":"2 kΩ","Calibration possible in RUN":"No","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C; Observe derating","Vertical Installation, Min.":"-30 °C; < 0 °C as of FS07","Horizontal Installation, Max.":"60 °C; Observe derating","Horizontal Installation, Min.":"-30 °C; < 0 °C as of FS07","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Address space per module, max.":"8 byte; + 1 byte for QI information","Analog output with oversampling":"No","Cycle time (all channels), min.":"5 ms","Type of mechanical coding element":"Type A","Reparameterization possible in RUN":"Yes","Crosstalk between the outputs, min.":"-50 dB","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","Between The Channels And Backplane Bus":"Yes","For Current Output Two-Wire Connection":"Yes","For Voltage Output Two-Wire Connection":"Yes","PROFIBUS from GSD version/GSD revision":"One GSD file each, Revision 3 and 5 and higher","PROFINET from GSD version/GSD revision":"GSDML V2.3","For Voltage Output Four-Wire Connection":"Yes","Current, relative to output range, (+/-)":"0.3 %","Voltage, relative to output range, (+/-)":"0.3 %","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","PCS 7 configurable/integrated from version":"V8.1 SP1","With Current Outputs, Inductive Load, Max.":"1 mH","Installation altitude above sea level, max.":"5 000 m; Restrictions for installation altitudes > 2 000 m, see manual","STEP 7 configurable/integrated from version":"V5.5 SP3 / -","Voltage output, short-circuit current, max.":"45 mA","With Voltage Outputs, Capacitive Load, Max.":"1 µF","Linearity error (relative to output range), (+/-)":"0.03 %","Temperature error (relative to output range), (+/-)":"0.005 %/K","Resolution with overrange (bit including sign), max.":"16 bit","STEP 7 TIA Portal configurable/integrated from version":"V11 SP2 / V13","Color code for module-specific color identification plate":"CC00","Between The Channels And The Power Supply Of The Electronics":"Yes","Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)":"0.05 %"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$152.40","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6c38a0c91516c5f0278fccca9f25bec7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=510965&mlfb=6ES7135-6HD00-0BA1"},"ai":{"faq":[{"question":"What base units are compatible with 6ES7135-6HD00-0BA1?","answer":"It fits BaseUnits type A0 and A1. These are the standard ET 200SP base units used across the analog and digital slice range — no special adapter needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7135-6HD00-0BA1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7135-6HD00-0BA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}