{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7135-6TD00-0CA1","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7135-6TD00-0CA1","canonicalUrl":"https://aoctrl.com/siemens/6ES7135-6TD00-0CA1","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7135-6TD00-0CA1","rawCanonicalId":null},"summary":{"shortDescription":"Siemens Simatic ET 200SP, analog output module, 4 AO, HART, 0/4-20 mA, 16 bit, 24 V DC, BU type A0/A1, width 15 mm, depth 58 mm.","salesMarkdown":"The 6ES7135-6TD00-0CA1: Power draw is a light 1.7 W typical, and it runs on 24 V DC. The module snaps onto BU type A0 or A1 base units. At just 15 mm wide, it packs four outputs into a single slot, saving real estate on the rail. Depth is 58 mm – same as the rest of the ET 200SP family, so the cabinet layout is predictable. Fits base unit type A0 or A1. Shielded cable runs up to 800 m; no channel-to-channel isolation. Diagnostic LEDs are on the front panel: green per-channel status, red per-channel fault, and a green/red DIAG LED for module-level alarms. Firmware is V1.0 and can be updated in the field if a later revision rolls out. The module reports I&M data from levels 0 to 3, which makes asset tracking through the engineering tool straightforward. The 6ES7135-6TD00-0CA1 is marked as current production – no phase-out or end-of-life concerns. It's an active Siemens catalog item. We source it to order; send an RFQ and we'll confirm lead time and pricing against your required quantity.","metaTitle":"Siemens 6ES7135-6TD00-0CA1 ET 200SP AO 4xI HART, 58mm","metaDescription":"Active Siemens ET 200SP analog output module, 4 channels 0/4-20 mA, HART, 16-bit, width 15 mm, depth 58 mm. Sourced to order. Submit RFQ for lead time.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC Communication Modules"],"specifications":{"Depth":"58 mm","Width":"15 mm","title":"6ES7135-6TD00-0CA1","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","0 to 20 mA":"Yes; 16 bit incl. sign","Wire-break":"Yes; channel by channel","description":"SIMATIC ET 200SP, analog HART output module, AQ 4xI HART High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.3%","4 mA to 20 mA":"Yes; 16 bit incl. sign","HART protocol":"Yes","Short-circuit":"Yes","Shielded, Max.":"800 m","Weight, approx.":"31 g","lifecycle_stage":"current","-20 mA to +20 mA":"No","Diagnostic alarm":"Yes","Firmware version":"V1.0","Power loss, typ.":"1.7 W","Rated value (DC)":"24 V","usable BaseUnits":"BU type A0, A1","FW update possible":"Yes","For Inductive Load":"2 ms","For Resistive Load":"2 ms; 750 ohm","Overflow/underflow":"Yes; channel by channel","For Capacitive Load":"2 ms","Between The Channels":"No","Diagnostics function":"Yes","Isolation tested with":"707 V DC (type test)","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","For Channel Diagnostics":"Yes; red LED","Voltages at the outputs":"30 V","Number of analog outputs":"4","Current consumption, max.":"125 mA","Mechanical coding element":"Yes","Between Different Circuits":"60 V DC/30 V AC","With Current Outputs, Max.":"750 Ω","Calibration possible in RUN":"No","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"-30 °C","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"-30 °C","Monitoring the supply voltage":"Yes; Module-wise","Substitute values connectable":"Yes","Address space per module, max.":"8 byte; + 1 byte for QI information","Cycle time (all channels), min.":"3 ms","Current consumption (rated value)":"115 mA","Type of mechanical coding element":"Type A","Reparameterization possible in RUN":"Yes","Crosstalk between the outputs, min.":"-50 dB","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","Current output, no-load voltage, max.":"28 V","Between The Channels And Backplane Bus":"Yes","For Current Output Two-Wire Connection":"Yes","PROFIBUS from GSD version/GSD revision":"V04.02.14","PROFINET from GSD version/GSD revision":"GSDML V2.34","Address space per module with HART, max.":"28 byte; + 1 byte for QI information","Between the channels and load voltage L+":"Yes","Current, relative to output range, (+/-)":"0.1 %","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","PCS 7 configurable/integrated from version":"V9.0 SP1","With Current Outputs, Inductive Load, Max.":"10 mH","Installation altitude above sea level, max.":"5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual","STEP 7 configurable/integrated from version":"V5.6 and higher","Linearity error (relative to output range), (+/-)":"0.03 %","Temperature error (relative to output range), (+/-)":"0.003 %/K","STEP 7 TIA Portal configurable/integrated from version":"V15 SP1","Color code for module-specific color identification plate":"CC00","Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)":"0.02 %","Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)":"0.03 %"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$388.62","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1390163&mlfb=6ES7135-6TD00-0CA1"},"ai":{"faq":[{"question":"What is the maximum load resistance for the current outputs?","answer":"The maximum load with current outputs is 750 ohms. This is the specified value for resistive loads at a 2 ms settling time. Stay within that limit to keep accuracy and response time within spec."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7135-6TD00-0CA1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7135-6TD00-0CA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}