{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7136-6DB00-0CA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7136-6DB00-0CA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7136-6DB00-0CA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7136-6DB00-0CA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200SP, F-DQ 4x24VDC/2A, fail-safe digital output module, 4 channels, 2 A per channel, 24 V DC, SIL 3, width 15 mm.","salesMarkdown":"## SIL 3 fail-safe output slice for ET 200SP The Siemens 6ES7136-6DB00-0CA0 is a fail-safe digital output module for the ET 200SP distributed I/O system, delivering 4 transistor outputs rated 2 A per channel at 24 V DC. Its SIL 3 certification per IEC 61508 means it can be used in safety circuits up to that integrity level — think emergency-stop chains, light-curtain muting, or guard-door monitoring where the output must switch off within the safety reaction time. ## Channel ratings and load switching limits Each of the 4 outputs handles up to 2 A continuously, with the module total capped at 6 A — derating applies above ambient, per the manual. The switching frequency depends on the load type: resistive loads switch at up to 30 Hz, while inductive loads (DC-13 per IEC 60947-5-1) are limited to 0.1 Hz. Lamp loads are symmetrical at 10 Hz max. Short-circuit and overload protection are built in, with a typical response threshold of 2.9 A. ## Diagnostics, wiring, and base unit fit The module provides per-channel diagnostics (open-circuit detection, short-circuit alarm) with a red ERROR LED and a green/red DIAG LED. I&M data (I&M0 to I&M3) is supported for asset tracking. It mounts on a BU type A0 base unit, which provides automatic encoding — no manual addressing.","metaTitle":"Siemens 6ES7136-6DB00-0CA0 ET 200SP F-DQ 4x24VDC/2A, SIL 3","metaDescription":"Siemens 6ES7136-6DB00-0CA0 ET 200SP fail-safe digital output module, 4 channels, 2 A per channel, 24 V DC, SIL 3. Current lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"Depth":"58 mm","Width":"15 mm","title":"6ES7136-6DB00-0CA0","Height":"73 mm","Inputs":"5 byte","Outputs":"5 byte","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","ERROR LED":"Yes; red LED","Lower Limit":"12 Ω","Upper Limit":"2 000 Ω","description":"SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)","Shielded, Max.":"1 000 m","Weight, approx.":"57 g","lifecycle_stage":"current","Diagnostic alarm":"Yes","Power loss, typ.":"4 W","Rated value (DC)":"24 V","Unshielded, Max.":"500 m","usable BaseUnits":"BU type A0","Automatic encoding":"Yes","On Lamp Load, Max.":"10 Hz; Symmetrical","Overload protection":"Yes","Between The Channels":"No","Diagnostics function":"Yes","For Signal \"1\", Min.":"24 V; L+ (-0.5 V)","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 61508":"SIL 3","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Open-circuit detection":"Yes","Type of digital output":"Transistor","For Channel Diagnostics":"Yes; red LED","Current per module, max.":"6 A; note derating data in the manual","Response threshold, typ.":"2.9 A","Short-circuit protection":"Yes","Current consumption, max.":"21 mA; From the backplane bus","Current per channel, max.":"2 A; note derating data in the manual","Number of digital outputs":"4","With Inductive Load, Max.":"0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical","With Resistive Load, Max.":"30 Hz; Symmetrical","For Signal \"1\" Rated Value":"2 A","Controlling a digital input":"Yes; digital output, according to IEC 61131-2, type 2","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"0 °C","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"0 °C","Substitute values connectable":"No","Suitable for safety functions":"Yes","Digital outputs, parameterizable":"Yes","Electronic coding element type F":"Yes","Current consumption (rated value)":"75 mA; without load","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.5 mA","Between The Channels And Backplane Bus":"Yes","PROFINET from GSD version/GSD revision":"V2.31","Power available from the backplane bus":"70 mW","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Performance level according to ISO 13849-1":"PLe","Installation altitude above sea level, max.":"4 000 m; Restrictions for installation altitudes > 2 000 m, see manual","Limitation of inductive shutdown voltage to":"Typ. -2x 47 V","STEP 7 configurable/integrated from version":"V5.5 SP3 / -","power supply according to NEC Class 2 required":"No","Low demand mode: PFDavg in accordance with SIL2":"< 2.00E-04","Low demand mode: PFDavg in accordance with SIL3":"< 2.00E-05","STEP 7 TIA Portal configurable/integrated from version":"V12","High demand/continuous mode: PFH in accordance with SIL2":"< 1.00E-08 1/h","High demand/continuous mode: PFH in accordance with SIL3":"< 1.00E-09 1/h","Between The Channels And The Power Supply Of The Electronics":"No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$172.72","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4047d3486a8ab0c924e3996c8a5626a7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=446297&mlfb=6ES7136-6DB00-0CA0"},"ai":{"faq":[{"question":"Is 6ES7136-6DB00-0CA0 compatible with standard ET 200SP CPUs?","answer":"Yes, it fits any ET 200SP station with a BU type A0 base unit. The module auto-encodes on insertion and communicates via the backplane bus, drawing up to 21 mA from it."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7136-6DB00-0CA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7136-6DB00-0CA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}