{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7136-6DC00-0CA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7136-6DC00-0CA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7136-6DC00-0CA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7136-6DC00-0CA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 6ES7136-6DC00-0CA0, ET 200SP digital output module, 8 transistor outputs, 0.5 A per channel, SIL 3, 15 mm width, 3 W typ. loss.","salesMarkdown":"## 8 outputs, 0.5 A per channel, SIL 3 rated The Siemens 6ES7136-6DC00-0CA0 is an ET 200SP digital output module with 8 transistor outputs, each rated 0.5 A max (note the derating data in the manual). ## Current derating and thermal budget The total module current is capped at 3 A, with per-channel limits dropping from 0.5 A at 40 °C to 2 A module total at 50 °C and 60 °C. That means if you pack all 8 channels near the limit in a warm cabinet, the sum must stay under 2 A — a real constraint for grouping high-duty solenoids or valve banks on one slice. ## Diagnostics and integration Diagnostics are per-channel (red LED) plus a module DIAG LED (green/red). The module fits BU type A0 base units, auto-encodes on the backplane, and supports firmware update. Power loss is 3 W typ., and the 15 mm width packs tightly on a DIN rail.","metaTitle":"Siemens 6ES7136-6DC00-0CA0 Digital Output Module, 8×0.5 A","metaDescription":"Siemens 6ES7136-6DC00-0CA0 digital output module, 8 transistor outputs at 0.5 A per channel, SIL 3 capable. 15 mm wide, 3 W typ. loss. Current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"Depth":"58 mm","Width":"15 mm","title":"6ES7136-6DC00-0CA0","Height":"73 mm","Inputs":"6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA","Outputs":"6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","ERROR LED":"Yes; red LED","Lower Limit":"48 Ω","Upper Limit":"12 000 Ω","description":"SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)","Shielded, Max.":"100 m","Weight, approx.":"48 g","lifecycle_stage":"current","Diagnostic alarm":"Yes","Power loss, typ.":"3 W","Rated value (DC)":"24 V","Unshielded, Max.":"100 m","usable BaseUnits":"BU type A0","Automatic encoding":"Yes","FW update possible":"Yes","On Lamp Load, Max.":"10 Hz; Symmetrical","up to 40 °C, max.":"3 A","up to 50 °C, max.":"2 A","up to 60 °C, max.":"2 A","Between The Channels":"No","Diagnostics function":"Yes","For Signal \"1\", Min.":"24 V; L+ (-0.5 V)","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 61508":"SIL 3","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Open-circuit detection":"No","Type of digital output":"Transistor","For Channel Diagnostics":"Yes; red LED","Current per module, max.":"3 A; note derating data in the manual","Response threshold, typ.":"Min. 0.7 A","Short-circuit protection":"Yes","Current consumption, max.":"21 mA; From the backplane bus","Current per channel, max.":"0.5 A; note derating data in the manual","Number of digital outputs":"8","With Inductive Load, Max.":"0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical","With Resistive Load, Max.":"30 Hz; Symmetrical","For Signal \"1\" Rated Value":"0.5 A","With Capacitive Load, Max.":"2 Hz; Symmetrical","Controlling a digital input":"Yes; digital output, according to IEC 61131-2, type 0.5","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"0 °C","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"0 °C","Substitute values connectable":"No","Suitable for safety functions":"Yes","Digital outputs, parameterizable":"Yes","Electronic coding element type F":"Yes","Category according to ISO 13849-1":"Cat. 4","Current consumption (rated value)":"75 mA; without load","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.5 mA","Between The Channels And Backplane Bus":"Yes","PROFINET from GSD version/GSD revision":"V2.31","Power available from the backplane bus":"70 mW","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Performance level according to ISO 13849-1":"PLe","Installation altitude above sea level, max.":"4 000 m; with derating","Limitation of inductive shutdown voltage to":"Typ. -39 V","STEP 7 configurable/integrated from version":"V5.5 SP4 HF5","power supply according to NEC Class 2 required":"No","Low demand mode: PFDavg in accordance with SIL3":"< 6.00E-05","STEP 7 TIA Portal configurable/integrated from version":"V14 SP1 with HSP 202","High demand/continuous mode: PFH in accordance with SIL3":"< 2.00E-09 1/h","Color code for module-specific color identification plate":"CC02","Between The Channels And The Power Supply Of The Electronics":"No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$193.04","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e6aa5e1c23cc89ae9a18147973c71d90.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1027152&mlfb=6ES7136-6DC00-0CA0"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7136-6DC00-0CA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7136-6DC00-0CA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}