{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7136-6PA00-0BC0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7136-6PA00-0BC0","canonicalUrl":"https://aoctrl.com/siemens/6ES7136-6PA00-0BC0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7136-6PA00-0BC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200SP F-PM-E fail-safe power module, 6ES7136-6PA00-0BC0, 24 V DC, 2 fail-safe digital outputs, SIL 3, BU type C0.","salesMarkdown":"## SIL 3 fail-safe power module for ET 200SP The Siemens 6ES7136-6PA00-0BC0 is an ET 200SP F-PM-E fail-safe power module that supplies the module bus and provides two fail-safe digital outputs, rated SIL 3 per IEC 61508. It accepts a 24 V DC supply with a tolerance of L+ (-1.5 V) minimum, so it runs cleanly on a regulated 24 V bus without needing a separate power supply. The two fail-safe outputs are rated 0.3 A each at up to 60 °C, and the total encoder supply current is 600 mA. The load impedance range is 3 Ω to 2000 Ω, so it drives solenoids, contactors, and indicator lamps within that window. Lamp load switching is limited to 4 Hz symmetrical. Input thresholds are -30 to +5 V for signal \"0\" and +15 to +30 V for signal \"1\", with a typical current draw of 3.7 mA at 24 V. The input filter is non-parameterizable with a 0.4 ms minimum and 20 ms maximum transition time — fast enough for most safety sensor signals but not for high-speed encoder counting. There is no channel-to-channel isolation between the outputs, so both outputs share a common reference. Isolation is tested at 707 V DC type test. The module draws 5 W typical power loss, which adds to the cabinet thermal budget. ## Integration notes The module supports I&M data (I&M0 to I&M3) for asset tracking and automatic encoding for slot identification. Diagnostic alarms and a red ERROR LED plus green RUN LED give on-module status without needing the CPU. The diagnostics function covers alarms and diagnostic messages per the manual. Unshielded cable runs up to 500 m, shielded up to 1000 m. The module has overload protection on the outputs. No hardware interrupt is supported.","metaTitle":"Siemens 6ES7136-6PA00-0BC0 F-PM-E Power Module, SIL 3, 24 V","metaDescription":"Siemens 6ES7136-6PA00-0BC0 ET 200SP F-PM-E power module, 24 V DC, 2 fail-safe outputs, SIL 3. Active production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC Communication Modules"],"specifications":{"24 V":"Yes; min. L+ (-1.5 V)","Depth":"58 mm","Width":"20 mm","title":"6ES7136-6PA00-0BC0","Height":"73 mm","Inputs":"7 byte","Outputs":"5 byte","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","ERROR LED":"Yes; red LED","Lower Limit":"3 Ω","Upper Limit":"2 000 Ω","description":"SIMATIC DP, POWER M. F-PM-E PPM PROFIsafe, for ET 200SP; 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 for safe dig. inputs 1 for safe dig. output PPM","For Signal \"0\"":"-30 to +5 V","For Signal \"1\"":"+15 to +30 V","Shielded, Max.":"1 000 m","Parameterizable":"No","Weight, approx.":"70 g","lifecycle_stage":"current","Diagnostic alarm":"Yes","Power loss, typ.":"5 W","Rated value (DC)":"24 V","Unshielded, Max.":"500 m","usable BaseUnits":"BU type C0","Number of outputs":"2","Source/sink input":"Yes; P-reading","Automatic encoding":"Yes","Hardware interrupt":"No","On Lamp Load, Max.":"4 Hz; Symmetrical","up to 60 °C, max.":"0.3 A","At \"0\" To \"1\", Max.":"20 ms","At \"0\" To \"1\", Min.":"0.4 ms","At \"1\" To \"0\", Max.":"20 ms","At \"1\" To \"0\", Min.":"0.4 ms","Overload protection":"Yes","Between The Channels":"No","Diagnostics function":"Yes; See Chapter \"Alarms/diagnostic messages\" in the manual","For Signal \"1\", Min.":"24 V; L+ (-0.5 V)","For Signal \"1\", Typ.":"3.7 mA","Output current, max.":"600 mA; Total current of all encoders","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 61508":"SIL 3","Type of input voltage":"DC","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Open-circuit detection":"Yes","For Channel Diagnostics":"Yes; red LED","Current per module, max.":"8 A; note derating data in the manual","Number of digital inputs":"2","Response threshold, typ.":"8.8 A","Short-circuit protection":"Yes","Current consumption, max.":"21 mA; From the backplane bus","Current per channel, max.":"8 A; note derating data in the manual","Number of digital outputs":"1","With Inductive Load, Max.":"0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical","With Resistive Load, Max.":"10 Hz; Symmetrical","For Signal \"1\" Rated Value":"8 A","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"0 °C","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"0 °C","Substitute values connectable":"No","Suitable for safety functions":"Yes","Electronic coding element type F":"Yes","Current consumption (rated value)":"75 mA; without load","permissible range, lower limit (DC)":"20.4 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"1.5 mA; PP-switching: max. 1.5 mA; PM-switching: max. 1 mA","Between The Channels And Backplane Bus":"Yes","PROFINET from GSD version/GSD revision":"V2.31","Power available from the backplane bus":"70 mW","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Performance level according to ISO 13849-1":"PLe","Limitation of inductive shutdown voltage to":"Max. -1.5 V","STEP 7 configurable/integrated from version":"V5.5 SP3 / -","STEP 7 TIA Portal configurable/integrated from version":"V12","Color code for module-specific color identification plate":"CC52","Between The Channels And The Power Supply Of The Electronics":"No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$195.58 – $583.20","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/67c724f78ae0edfe22d5984474b9a9a5.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=196795&mlfb=6ES7136-6PA00-0BC0"},"ai":{"faq":[{"question":"Is 6ES7136-6PA00-0BC0 compatible with Siemens ET 200SP?","answer":"Yes, it is an ET 200SP F-PM-E module that mounts on a BU type C0 base unit in the standard ET 200SP rack."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7136-6PA00-0BC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7136-6PA00-0BC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}