{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7141-5AH00-0BA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7141-5AH00-0BA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7141-5AH00-0BA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7141-5AH00-0BA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200AL, 6ES7141-5AH00-0BA0, PLC Communication Module, 16 digital inputs, 8 outputs, M8 shielded, IP65/67, SIL 2, Cat. 3, -30 to 55 °C.","salesMarkdown":"## What this module is for The Siemens 6ES7141-5AH00-0BA0 is a compact ET 200AL I/O module packing 16 digital inputs and 8 digital outputs in a 45 mm wide housing built for the pit. It connects via M8, 4-pin shielded connectors, rated IP65/67, so it shrugs off the abrasive dust and washdown cycles on a crusher or flotation line. ## Temperatures and environmental limits Rated from -30 °C to 55 °C ambient, this module handles the cold starts in a northern pit and the heat inside a sealed panel next to a VFD. ## Input and output specs that matter The 16 inputs sink 3.2 mA typical at 24 VDC, with signal thresholds of -30 to +5 V for logic 0 and +11 to +30 V for logic 1 — compatible with standard 24 V sensors and 2-wire proximity switches. Input transition times are 1.2 ms to 4.8 ms, fast enough for most discrete sensing on conveyors and chutes. The 8 outputs provide a total encoder supply current of 1.4 A, with electronic short-circuit protection per module and reverse-polarity protection against destruction. Power loss is 2.7 W typical, so it doesn't cook its neighbours in a dense I/O rack. ## Safety and diagnostics Rated SIL 2 per IEC 62061 and Category 3 per ISO 13849-1, this module can be used in safety-related applications up to those levels — guarding a hazard zone on a mill or conveyor. Diagnostic alarm is parameterizable, with a green/red LED for module diagnostics and a green LED per channel for status — helps a field service tech isolate a fault without a laptop. I&M data up to I&M3 is supported, making asset tracking and firmware management straightforward during commissioning.","metaTitle":"Siemens 6ES7141-5AH00-0BA0 PLC Communication Module","metaDescription":"Siemens 6ES7141-5AH00-0BA0 ET 200AL module with 16 digital inputs, 8 outputs, SIL 2, Cat. 3. IP65/67, -30 to 55 °C. Active production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC Communication Modules"],"specifications":{"Max.":"55 °C","Min.":"-30 °C","Depth":"40 mm","Width":"45 mm","title":"6ES7141-5AH00-0BA0","Height":"159 mm","I&M data":"Yes; I&M0 to I&M3","description":"SIMATIC ET 200AL, DI 16x 24 V DC, 8x M12, Degree of protection IP67","2-Wire Sensor":"Yes","ET-Connection":"M8, 4-pin, shielded","Short-circuit":"Yes; Sensor supply to M; module by module","For Signal \"0\"":"-30 to +5 V","For Signal \"1\"":"+11 to +30V","Weight, approx.":"184 g","lifecycle_stage":"current","Diagnostic alarm":"Yes; Parameterizable","Firmware version":"V1.0.x","Power loss, typ.":"2.7 W","Rated value (DC)":"24 V","Unshielded, Max.":"30 m","Number of outputs":"8","up to 55 °C, max.":"16","At \"0\" To \"1\", Max.":"4.8 ms","At \"0\" To \"1\", Min.":"1.2 ms","At \"1\" To \"0\", Max.":"4.8 ms","At \"1\" To \"0\", Min.":"1.2 ms","Between The Channels":"No","For Signal \"1\", Typ.":"3.2 mA","HW functional status":"FS03","Output current, max.":"1.4 A; Total current of all encoders","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 62061":"SIL 2","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red LED","IP degree of protection":"IP65/67","Number of digital inputs":"16","Short-circuit protection":"Yes; per module, electronic","Between The Load Voltages":"Yes","Reverse polarity protection":"Yes; Against destruction; encoder power supply outputs applied with reversed polarity","from load voltage 2L+, max.":"4 A; Maximum value","Category according to ISO 13849-1":"Cat. 3","Current consumption (rated value)":"30 mA; without load","permissible range, lower limit (DC)":"20.4 V","permissible range, upper limit (DC)":"28.8 V","Between The Channels And Backplane Bus":"Yes","PROFIBUS from GSD version/GSD revision":"GSD as of Revision 5","PROFINET from GSD version/GSD revision":"GSDML V2.3.1","Performance level according to ISO 13849-1":"PL d","from load voltage 1L+ (unswitched voltage)":"4 A; Maximum value","STEP 7 configurable/integrated from version":"V5.5 SP4 Hotfix 7 or higher","power supply according to NEC Class 2 required":"No","Design of electrical connection for supply voltage":"M8, 4-pole","Permissible Quiescent Current (2-Wire Sensor), Max.":"1.5 mA","STEP 7 TIA Portal configurable/integrated from version":"STEP 7 V13 SP1 or higher","Suitable for safety-related tripping of standard modules":"Yes; From FS01","Design of electrical connection for the inputs and outputs":"M12, 5-pole","Between The Channels And The Power Supply Of The Electronics":"No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$104.14","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9d0a90c8424706107adf923e67359e1b.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=629465&mlfb=6ES7141-5AH00-0BA0"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7141-5AH00-0BA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7141-5AH00-0BA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}