{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7143-5BF00-0BA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7143-5BF00-0BA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7143-5BF00-0BA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7143-5BF00-0BA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200eco, digital input/output module, 6ES7143-5BF00-0BA0, IP65/67, 4 outputs, 4 parameterizable inputs, M8, 24 VDC.","salesMarkdown":"## Compact field I/O for harsh environments The Siemens 6ES7143-5BF00-0BA0 is an ET 200eco PN digital I/O module built for direct mounting in the field — IP65/67, M8 connectors, and a -30 to 55 °C ambient range mean it lives on the machine, not in a cabinet. It carries 4 digital outputs, each rated 0.7 A, and 4 digital inputs that can be parameterized as DIQ (dual-purpose I/O). That reduces spare-part SKUs when you need a small mix of sensors and actuators locally. I&M data (I&M0–I&M3) and parameterizable diagnostic alarm are built in, so your maintenance toolchain sees device identity and fault origin down to the channel level. The module draws 2.5 W typical from the 24 V DC supply, leaving plenty of headroom for the sensor loop and actuator coils on the same line. For BOM-freeze planning, note the firmware version V1.0.x. Rev-lock is possible if your project requires a specific firmware load; your RFQ can request the current delivery firmware. ## Wiring and mounting notes The module uses M8, 4-pin, shielded connectors (ET-Connection). Accepts 2-wire sensors natively. Maximum unshielded cable run is 30 m. Dimensions: 159 mm high, 30 mm wide, 40 mm deep — it fits a typical cable-gland footprint for distributed blocks. Output short-circuit protection is module-by-module and covers both output-to-M and encoder-supply-to-M faults. The module diagnostics LED (green/red) reports channel status and module health. Switch-off delay of outputs is symmetric: pulse suppression during inductive load switching is accounted for by the filtering (1.2–4.8 ms on/off). Lamp load switching is rated at 1 Hz max.","metaTitle":"Siemens 6ES7143-5BF00-0BA0 ET 200eco I/O Module, IP65/67, 24","metaDescription":"Siemens ET 200eco PN digital I/O module, 4 outputs + 4 parameterizable inputs, -30 to +55 °C, M8, IP65/67. Current production – sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC Communication Modules"],"specifications":{"Max.":"55 °C","Min.":"-30 °C","Depth":"40 mm","Width":"30 mm","title":"6ES7143-5BF00-0BA0","Height":"159 mm","I&M data":"Yes; I&M0 to I&M3","Lower Limit":"48 Ω","Upper Limit":"4 kΩ","description":"SIMATIC ET 200AL, DIQ 4+DQ 4x 24 V DC/0.5 A, 8XM8, Degree of protection IP67","In Groups Of":"4; 2 load groups for 4 outputs each","2-Wire Sensor":"Yes","ET-Connection":"M8, 4-pin, shielded","Short-circuit":"Yes; Outputs to M; encoder supply to M; module by module","For Signal \"0\"":"-3 to +5V","For Signal \"1\"":"+11 to +30V","Weight, approx.":"145 g","lifecycle_stage":"current","Diagnostic alarm":"Yes; Parameterizable","Firmware version":"V1.0.x","Power loss, typ.":"2.5 W","Rated value (DC)":"24 V","Unshielded, Max.":"30 m","Number of outputs":"4","On Lamp Load, Max.":"1 Hz","up to 55 °C, max.":"4","At \"0\" To \"1\", Max.":"4.8 ms","At \"0\" To \"1\", Min.":"1.2 ms","At \"1\" To \"0\", Max.":"4.8 ms","At \"1\" To \"0\", Min.":"1.2 ms","For Signal \"1\", Min.":"L+ (-0.8 V)","For Signal \"1\", Typ.":"3.2 mA","HW functional status":"E01","Output current, max.":"0.7 A; Total current of all encoders","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 62061":"SIL 2","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red LED","Current per group, max.":"2 A","IP degree of protection":"IP65/67","Number of digital inputs":"4; Parameterizable as DIQ","Response threshold, typ.":"0.7 A","Short-circuit protection":"Yes; per channel, electronic","Between The Load Voltages":"Yes","Number of digital outputs":"8; 4 DQ fixed, 4 DIQ parameterizable","With Inductive Load, Max.":"0.5 Hz","With Resistive Load, Max.":"100 Hz","For Signal \"1\" Rated Value":"0.5 A","For load voltage monitoring":"Yes; green LED","Reverse polarity protection":"Yes; against destruction; load increasing","from load voltage 2L+, max.":"4 A; Maximum value","Substitute values connectable":"Yes; channel by channel, parameterizable","Category according to ISO 13849-1":"Cat. 3","Current consumption (rated value)":"40 mA; without load","Between The Channels, In Groups Of":"4; DIQ channels are isolated from DQ channels","permissible range, lower limit (DC)":"20.4 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.5 mA","Between The Channels And Backplane Bus":"Yes","PROFIBUS from GSD version/GSD revision":"GSD as of Revision 5","PROFINET from GSD version/GSD revision":"GSDML V2.3.1","Performance level according to ISO 13849-1":"PL d","from load voltage 1L+ (unswitched voltage)":"4 A; Maximum value","Limitation of inductive shutdown voltage to":"2L+ (-47 V)","STEP 7 configurable/integrated from version":"From V5.5 SP4 Hotfix 3","Design of electrical connection for supply voltage":"M8, 4-pole","Permissible Quiescent Current (2-Wire Sensor), Max.":"1.5 mA","STEP 7 TIA Portal configurable/integrated from version":"STEP 7 V13 SP1 or higher","Suitable for safety-related tripping of standard modules":"Yes; From FS01","Design of electrical connection for the inputs and outputs":"M8, 3-pole","Between The Channels And The Power Supply Of The Electronics":"No; DIQ channels are non-isolated and DQ channels are isolated from supply voltage 1L+"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$71.12","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/940a4295b1a25f052a1d9e793c08a944.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=62927&mlfb=6ES7143-5BF00-0BA0"},"ai":{"faq":[{"question":"What are the key temperature limits of this module?","answer":"The operating ambient range is -30 °C to +55 °C."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7143-5BF00-0BA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7143-5BF00-0BA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}