{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7144-6JF00-0BB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7144-6JF00-0BB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7144-6JF00-0BB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7144-6JF00-0BB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC ET200SP, 6ES7144-6JF00-0BB0, temperature input module, 2x M12 ports, PROFINET with IRT 250 µs.","salesMarkdown":"Siemens 6ES7144-6JF00-0BB0 is a PROFINET IO module for direct connection of resistance thermometers (Pt100, Pt1000, Ni100 etc.) and thermocouples (types B, C, E, J, K, L, N, R, S, T, U). Two M12, 4-pin, D-coded ports bring sensor wiring directly into the module, eliminating separate junction boxes. IRT is supported with a cycle time from 250 µs to 4 ms in 125 µs frames, placing it on high-speed deterministic networks alongside ARP, MRP, MSI, and LLDP. Dimensions are 45 mm wide, 200 mm high, and 48 mm deep. Status diagnostics via RUN/ERROR/IO/MS/NS LEDs (red, green, yellow). ## Sensor compatibility Supports Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni200, Ni500, Ni1000 in standard and climate ranges, plus Pt1000 and Ni1000. All RTD inputs are 16-bit including sign. Thirteen thermocouple types are covered, all at 16-bit resolution with sign. This module covers the full temperature sensing spectrum for furnace, HVAC, and process applications. The module occupies 16 input bytes plus 1 byte for QI information per the PROFINET IO data model. This is a fixed I/O footprint typical for temperature slices — plan your IO mapping accordingly. No expansion bus is needed beyond the two M12 ports; each port handles a single sensor.","metaTitle":"Siemens 6ES7144-6JF00-0BB0 Temperature RTD TC Module, IRT 25","metaDescription":"Siemens 6ES7144-6JF00-0BB0 PROFINET IO device for RTD/thermocouple inputs. IRT 250µs, 2x M12 ports, ARP/MRP support. Order-to-quote sourcing.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC Communication Modules"],"specifications":{"ARP":"Yes","IRT":"Yes; 250 µs to 4 ms in 125 µs frame","MRP":"Yes","MSI":"Yes","LLDP":"Yes","Max.":"60 °C","Min.":"-40 °C","SNMP":"Yes","Depth":"48 mm","Width":"45 mm","title":"6ES7144-6JF00-0BB0","Height":"200 mm","IO LED":"Yes; red/green/yellow LEDs","Inputs":"16 byte; + 1 byte for QI information","MS LED":"Yes; green/red LED","NS LED":"Yes; green/red LED","Ni 100":"Yes; Standard/climate","Ni 120":"Yes; Standard/climate","Ni 200":"Yes; Standard/climate","Ni 500":"Yes; Standard/climate","Pt 100":"Yes; Standard/climate","Pt 200":"Yes; Standard/climate","Pt 500":"Yes; Standard/climate","TCP/IP":"Yes; (only EtherNet/IP or Modbus TCP)","Type B":"Yes; 16 bit incl. sign","Type C":"Yes; 16 bit incl. sign","Type E":"Yes; 16 bit incl. sign","Type J":"Yes; 16 bit incl. sign","Type K":"Yes; 16 bit incl. sign","Type L":"Yes; 16 bit incl. sign","Type N":"Yes; 16 bit incl. sign","Type R":"Yes; 16 bit incl. sign","Type S":"Yes; 16 bit incl. sign","Type T":"Yes; 16 bit incl. sign","Type U":"Yes; 16 bit incl. sign","Ni 1000":"Yes; Standard/climate","Pt 1000":"Yes; Standard/climate","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","M12 port":"Yes; 2x M12, 4-pin, D-coded","ERROR LED":"Yes; red LED","MAINT LED":"Yes; Yellow LED","PROFIsafe":"No","Step: low":"Yes; 4x cycle time","CIP Safety":"No","Modbus TCP":"Yes","Step: High":"Yes; 32x cycle time","Step: None":"Yes; 1x cycle time","Wire-break":"Yes; Not for ±80 mV","on S7-400H":"Yes","EtherNet/IP":"Yes","description":"SIMATIC ET 200eco PN, AI 8xRTD/TC, M12-L, 8x M12, 16-bit resolution, channel diagnostics for wire break at input, shared device with 2 controllers, prioritized startup, MSI, MRP, S2 redundancy, I&M0...3, multi-fieldbus, PN IO, Ethernet IP, Modbus TCP, degree of protection IP67 / IP69K","Autocrossing":"Yes","Step: Medium":"Yes; 16x cycle time","0 To 150 Ohms":"Yes","0 To 300 Ohms":"Yes","0 To 600 Ohms":"Yes","Shared device":"Yes; 2x EtherNet/IP Scanner","on S7-1500R/H":"Yes","0 To 3000 Ohms":"Yes","0 To 6000 Ohms":"Yes","Interface type":"PROFINET with 100 Mbit/s full duplex (100BASE-TX)","Shielded, Max.":"30 m","Autonegotiation":"Yes","Number of ports":"2","Parameterizable":"Yes","Weight, approx.":"780 g","lifecycle_stage":"current","-80 mV to +80 mV":"Yes; 16 bit incl. sign","24 V DC circuits":"707 V DC (type test)","Diagnostic alarm":"Yes; Parameterizable","Firmware version":"V5.1.x","Isochronous mode":"No","Power loss, typ.":"6.3 W","Rated value (DC)":"24 V","H-Sync forwarding":"Yes","Integrated Switch":"Yes","Limit value alarm":"Yes; two upper and two lower limit values in each case","FW update possible":"Yes","Overflow/underflow":"Yes","PROFINET IO Device":"Yes","Prioritized startup":"Yes","Read Coils (Code=1)":"Yes","Analog value display":"SIMATIC S7 format","Between The Channels":"No","HW functional status":"FS01","I/O request interval":"2 ms","Integration time (ms)":"0.84 / 16.7 (50) / 20 (60) / 60 (180)","Maintenance interrupt":"Yes; Parameterizable","Measurement principle":"integrating","Open IE communication":"Yes","SIL acc. to IEC 62061":"SIL 2","CIP Explicit Messaging":"Yes","CIP Implicit Messaging":"Yes","Channel status display":"Yes; green LED","DLR (Device Level Ring)":"No","For Channel Diagnostics":"Yes; red LED","For voltage measurement":"8","IP degree of protection":"IP65/67/69K","Number of analog inputs":"8","Transmission rate, max.":"100 Mbit/s","Measuring range scalable":"Yes","Between The Load Voltages":"Yes","Input resistance (Ni 100)":"10 MΩ","Input resistance (Ni 120)":"10 MΩ","Input resistance (Ni 200)":"10 MΩ","Input resistance (Ni 500)":"10 MΩ","Input resistance (Pt 100)":"10 MΩ","Input resistance (Pt 200)":"10 MΩ","Input resistance (Pt 500)":"10 MΩ","Input resistance (Type B)":"10 MΩ","Input resistance (Type C)":"10 MΩ","Input resistance (Type E)":"10 MΩ","Input resistance (Type K)":"10 MΩ","Input resistance (Type L)":"10 MΩ","Input resistance (Type N)":"10 MΩ","Input resistance (Type R)":"10 MΩ","Input resistance (Type S)":"10 MΩ","Input resistance (Type T)":"10 MΩ","Input resistance (Type U)":"10 MΩ","Input resistance (type J)":"10 MΩ","LargeForwardOpen (Class3)":"No","Input resistance (Ni 1000)":"10 MΩ","Input resistance (Pt 1000)":"10 MΩ","Parameter change by master":"No","Write Single Coil (Code=5)":"Yes","Calibration possible in RUN":"Yes","Fixed Reference Temperature":"Yes","Reverse polarity protection":"Yes; against destruction","from load voltage 2L+, max.":"12 A; Maximum value","Device identifier (DeviceID)":"0306H","For thermocouple measurement":"8","Modbus TCP Security Protocol":"No","Connection display LINK TX/RX":"Yes; green LED, only link","Monitoring the supply voltage":"Yes","Number of PROFINET interfaces":"1","Read Discrete Inputs (Code=2)":"Yes","Address space per module, max.":"38 byte","Write Multiple Coils (Code=15)":"Yes","Access-consistent address space":"2 byte","Address space per station, max.":"38 byte","Cycle time (all channels), min.":"Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels); for line compensation in case of a three-wire connection, an additional cycle is necessary","Design of electrical connection":"4/5-pin M12 circular connectors","Diagnostic information readable":"Yes","Number of connections per slave":"12","PROFINET system redundancy (R1)":"No","PROFINET system redundancy (S2)":"Yes","Read Holding Registers (Code=3)":"Yes","Requested Packet Interval (RPI)":"2 ms","Input resistance (0 to 150 ohms)":"10 MΩ","Input resistance (0 to 300 ohms)":"10 MΩ","Input resistance (0 to 600 ohms)":"10 MΩ","between Ethernet and electronics":"Yes","Category according to ISO 13849-1":"Cat. 3","Current consumption (rated value)":"85 mA; without load","Input resistance (0 to 3000 ohms)":"10 MΩ","Input resistance (0 to 6000 ohms)":"10 MΩ","Integration time, parameterizable":"Yes; channel by channel","Internal Temperature Compensation":"Yes","Supports protocol for PROFINET IO":"Yes","Crosstalk between the inputs, max.":"-70 dB","Remark On Safety-Oriented Shutdown":"https://support.industry.siemens.com/cs/de/en/view/39198632","Write Multiple Registers (Code=16)":"Yes","Dynamic Reference Temperature Value":"Yes","Input resistance (-80 mV to +80 mV)":"10 MΩ","permissible range, lower limit (DC)":"20.4 V","permissible range, upper limit (DC)":"28.8 V","PROFINET from GSD version/GSD revision":"GSDML V2.4.x","Number of configurable submodules, max.":"2","Voltage, relative to input range, (+/-)":"0.1 %","Multi Fieldbus Configuration Tool (MFCT)":"from V1.3 SP1","Device ID according to ODVA (Product code)":"0FAAH","Performance level according to ISO 13849-1":"PL d","Resistance, relative to input range, (+/-)":"0.05 %; See deviations in the manual","Temperature error of internal compensation":"±1,5 °C","from load voltage 1L+ (unswitched voltage)":"12 A; Maximum value","Number of scanners with shared device, max.":"2","Manufacturer ID according to ODVA (VendorID)":"04E3H","Suitable for applications according to CQI-9":"Yes; based on AMS 2750 F","Test voltage for interface, rms value [Vrms]":"1 500 V; According to IEEE 802.3","Thermocouple, relative to input range, (+/-)":"0.15 %","power supply according to NEC Class 2 required":"No","Suitable for applications according to AMS 2750":"Yes; Declaration of Conformity, see online support entry 109757262","Linearity error (relative to input range), (+/-)":"0.01 %; ±0.1 % for resistance thermometers and resistance","For resistance/resistance thermometer measurement":"8","Number of IO Controllers with shared device, max.":"2","Design of electrical connection for supply voltage":"M12, 4-pin, L-coded","Temperature error (relative to input range), (+/-)":"0.0009 %/K; ±0.005 % / K at thermocouple","For Resistance Measurement With Two-Wire Connection":"Yes","Additional Conversion Time For Wire-Break Monitoring":"2 ms; for 3/4-wire transducer 4 ms","Ambient air temperature-barometric pressure-altitude":"Up to max. 5 000 m, at installation height > 2 000 m additional restrictions","For Resistance Measurement With Four-Wire Connection":"Yes","Resolution with overrange (bit including sign), max.":"16 bit","For Resistance Measurement With Three-Wire Connection":"Yes","Technical unit for temperature measurement adjustable":"Yes; Degrees Celsius / degrees Fahrenheit / Kelvin","Basic conversion time, including integration time (ms)":"4.50 / 21.5 (54) / 24 (64) / 64 (184)","Resistance thermometer, relative to input range, (+/-)":"0.05 %; See deviations in the manual","STEP 7 TIA Portal configurable/integrated from version":"STEP 7 V17 or higher with HSP 0369","Suitable for safety-related tripping of standard modules":"Yes; From FS01","Design of electrical connection for the inputs and outputs":"M12, 5-pin, A-coded","External Temperature Compensation With Compensations Socket":"Yes","Between The Channels And The Power Supply Of The Electronics":"Yes","Constant measurement current for resistance-type transmitter, typ.":"0.7 mA","Interference voltage suppression for interference frequency f1 in Hz":"none / 60 / 50 / 16.7","Permissible Input Voltage For Voltage Input (Destruction Limit), Max.":"24 V","Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)":"0.008 %","Series mode interference (peak value of interference < rated value of input range), min.":"40 dB"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$267.97","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/eaa2d09cb181f4f534f179bc0da588d0.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1550834&mlfb=6ES7144-6JF00-0BB0"},"ai":{"faq":[{"question":"What is the IRT performance of the 6ES7144-6JF00-0BB0?","answer":"IRT supports cycle times from 250 µs to 4 ms in 125 µs frames, enabling isochronous real-time applications like high-speed temperature control loops."},{"question":"Does the module support ARP (Address Resolution Protocol)?","answer":"Yes, ARP is listed as supported, ensuring standard PROFINET discovery and communication."},{"question":"Will 6ES7144-6JF00-0BB0 drop into a panel specified around 6ES7522-1BH01-0AB0 without rewiring?","answer":"No. The 6ES7522-1BH01-0AB0 is a digital output module from the S7-1500 series; the 6ES7144-6JF00-0BB0 is a temperature input module with M12 sensor connectors. They are functionally different and require different wiring, configuration, and IO mapping."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7144-6JF00-0BB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7144-6JF00-0BB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}