{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7145-5ND00-0BA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7145-5ND00-0BA0","canonicalUrl":"https://aoctrl.com/siemens/6ES7145-5ND00-0BA0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7145-5ND00-0BA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 6ES7145-5ND00-0BA0, ET 200AL analog output module, 4 channels, 24 VDC, IP65/67, SIL 2.","salesMarkdown":"## Four configurable analog outputs for distributed I/O The Siemens 6ES7145-5ND00-0BA0 is an ET 200AL analog output module with four channels, each configurable individually for voltage or current output. It handles the common industrial signal ranges: 0 to 10 V, ±10 V, 0 to 20 mA, 4 to 20 mA, and ±20 mA, with resolutions from 14 to 16 bits depending on the range selected. Rated for a 24 VDC supply with a typical power loss of 2.6 W, the module draws a total output current of 1 A up to 45 °C, derated to 0.5 A at the 55 °C maximum ambient. ## SIL 2 and IP65/67 for machine-mounted safety loops This module carries a SIL 2 rating per IEC 62061, meaning it can be used in safety-related analog control loops up to that integrity level. Operating temperature spans -30 °C to 55 °C, covering most outdoor and unheated indoor installations across the Gulf Coast and northern plants alike. ## Diagnostics and protection per channel Each output channel has its own diagnostic alarm, short-circuit protection (electronic, per module), and wire-break detection for current outputs. The module reports channel status via green LEDs and module diagnostics via a green/red LED. Load limits are specified: 500 Ω maximum for current outputs, 1 kΩ minimum for voltage outputs. The module also includes reverse-polarity protection on the actuator supply outputs. ## Current production, sourced per RFQ Firmware version is V1.0.x, and the hardware functional status starts from FS04. The module supports I&M data (I&M0 to I&M3) for asset tracking and commissioning records.","metaTitle":"Siemens 6ES7145-5ND00-0BA0 ET 200AL 4AO, SIL 2, IP65/67","metaDescription":"Siemens 6ES7145-5ND00-0BA0 analog output module for ET 200AL. 4 configurable channels, 24 VDC, SIL 2, IP65/67. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC Communication Modules"],"specifications":{"Max.":"55 °C","Min.":"-30 °C","Depth":"40 mm","Width":"30 mm","title":"6ES7145-5ND00-0BA0","Height":"159 mm","I&M data":"Yes; I&M0 to I&M3","0 to 10 V":"Yes; 15 bit","0 to 20 mA":"Yes; 15 bit","1 V to 5 V":"Yes; 14 bit","Wire-break":"Yes; channel-by-channel, only for output type \"current\"","Rated value":"Total current 1 A up to 45 °C; 0.5 A up to 55 °C","description":"SIMATIC ET 200AL, AQ 4xU/I, 4xM12, Degree of protection IP67","4 mA to 20 mA":"Yes; 14 bit","ET-Connection":"M8, 4-pin, shielded","Short-circuit":"Yes; Actuator supply module by module; channel by channel for output type \"voltage\"","-10 V to +10 V":"Yes; 16 bit incl. sign","Shielded, Max.":"30 m","Weight, approx.":"175 g","lifecycle_stage":"current","-20 mA to +20 mA":"Yes; 16 bit incl. sign","Diagnostic alarm":"Yes; Parameterizable","Firmware version":"V1.0.x","Power loss, typ.":"2.6 W","Rated value (DC)":"24 V","Number of outputs":"4","For Inductive Load":"1 ms","For Resistive Load":"1 ms","For Capacitive Load":"1 ms","Between The Channels":"No","HW functional status":"from FS04","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 62061":"SIL 2","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red LED","IP degree of protection":"IP65/67","Number of analog outputs":"4","Short-circuit protection":"Yes; per module, electronic","Between The Load Voltages":"Yes","With Current Outputs, Max.":"500 Ω","With Voltage Outputs, Min.":"1 kΩ","Reverse polarity protection":"Yes; Against destruction; actuator power supply outputs applied with reversed polarity","from load voltage 2L+, max.":"4 A; Maximum value","Substitute values connectable":"Yes; channel by channel, parameterizable","Cycle time (all channels) max.":"1 ms","Category according to ISO 13849-1":"Cat. 3","Current consumption (rated value)":"110 mA; without load","Crosstalk between the outputs, max.":"-70 dB","permissible range, lower limit (DC)":"20.4 V","permissible range, upper limit (DC)":"28.8 V","Voltages at the outputs towards MANA":"16 V","Current output, no-load voltage, max.":"15 V","Between The Channels And Backplane Bus":"Yes","For Current Output Two-Wire Connection":"Yes","For Voltage Output Two-Wire Connection":"Yes","PROFIBUS from GSD version/GSD revision":"GSD as of Revision 5","PROFINET from GSD version/GSD revision":"GSDML V2.3.1","For Current Output Four-Wire Connection":"Yes","For Voltage Output Four-Wire Connection":"Yes","Current, relative to output range, (+/-)":"0.15 %","Voltage output, short-circuit protection":"Yes","Voltage, relative to output range, (+/-)":"0.15 %","Performance level according to ISO 13849-1":"PL d","With Current Outputs, Inductive Load, Max.":"1 mH","from load voltage 1L+ (unswitched voltage)":"4 A; Maximum value","STEP 7 configurable/integrated from version":"V5.5 SP4 Hotfix 7 or higher","Voltage output, short-circuit current, max.":"24 mA","With Voltage Outputs, Capacitive Load, Max.":"1 µF","power supply according to NEC Class 2 required":"No","Linearity error (relative to output range), (+/-)":"0.1 %","Design of electrical connection for supply voltage":"M8, 4-pole","Temperature error (relative to output range), (+/-)":"0.005 %/K","Resolution with overrange (bit including sign), max.":"16 bit","STEP 7 TIA Portal configurable/integrated from version":"STEP 7 V14 or higher","Suitable for safety-related tripping of standard modules":"Yes; from FS04","Design of electrical connection for the inputs and outputs":"M12, 5-pole","Between The Channels And The Power Supply Of The Electronics":"No","Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)":"0.02 %","Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)":"0.03 %"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$151.13","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fce57bbbcce35ec7aff6f2d1d1c73502.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=762830&mlfb=6ES7145-5ND00-0BA0"},"ai":{"faq":[{"question":"Where can I buy the Siemens 6ES7145-5ND00-0BA0?","answer":"The 6ES7145-5ND00-0BA0 is available to order against an RFQ through independent distribution. Submit a request for current pricing and availability — stock and lead time are confirmed at quote time, not held on a shelf."},{"question":"What is the output type of the 6ES7145-5ND00-0BA0?","answer":"It has four analog output channels, each configurable for voltage (0–10 V, ±10 V, 1–5 V) or current (0–20 mA, 4–20 mA, ±20 mA) with resolutions between 14 and 16 bits depending on the range."},{"question":"Does the 6ES7145-5ND00-0BA0 have short-circuit protection?","answer":"Yes, the module provides electronic short-circuit protection per module, and channel-by-channel short-circuit protection for voltage outputs. Actuator supply modules are also protected module by module."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7145-5ND00-0BA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7145-5ND00-0BA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}