{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7148-6JE00-0BB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7148-6JE00-0BB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7148-6JE00-0BB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7148-6JE00-0BB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200SP CM IO-Link master module, 6ES7148-6JE00-0BB0, with 2x M12 D-coded ports, DI per channel, DQ max 100 mA, IRT, -40 to 60 °C.","salesMarkdown":"The Siemens 6ES7148-6JE00-0BB0 is an ET 200SP Communication Module for IO-Link, fitted with two M12, 4-pin D-coded ports. It provides one digital input per channel and a digital output rated at max 100 mA per channel, covering standard sensor and small actuator connectivity. IRT is supported in the 250 µs to 4 ms range, with a 125 µs frame, making it suitable for coordinated motion or fast loop applications. MRP, MSI, and MSO are all present, so the module fits into redundant ring topologies. ## Sourcing and fit for your BOM line This module is quoted to order. The input data length is 146 bytes plus 8 bytes for QI information; outputs occupy 130 bytes. That gives the planning engineer the IO map they need to size the process image. Wire-break detection is built into the digital inputs, triggering when input current drops below 0.3 mA per channel. The module supports I&M data up to I&M3, which helps with asset tracking and device replacement without reconfiguration.","metaTitle":"Siemens 6ES7148-6JE00-0BB0 IO-Link Master, 2x M12, -40-60°C","metaDescription":"Siemens 6ES7148-6JE00-0BB0 ET 200SP IO-Link master module. DI, DQ max 100 mA, IRT, two M12 D-coded ports. Rated -40 to 60 °C. Sourced to order; RFQ for current lead time.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC Communication Modules"],"specifications":{"DI":"Yes","DQ":"Yes; max. 100 mA","ARP":"Yes","IRT":"Yes; 250 µs to 4 ms in 125 µs frame","MRP":"Yes","MSI":"Yes","MSO":"Yes","LLDP":"Yes","Max.":"60 °C","Min.":"-40 °C","SNMP":"Yes","Depth":"48 mm","Width":"45 mm","title":"6ES7148-6JE00-0BB0","Height":"200 mm","IO LED":"Yes; red-green-yellow LED","Inputs":"146 byte; + 8 bytes for QI information","MS LED":"Yes; green/red LED","NS LED":"Yes; green/red LED","TCP/IP":"Yes; (only EtherNet/IP or Modbus TCP)","Counter":"No","IO-Link":"Yes","Outputs":"130 byte","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","M12 port":"Yes; 2x M12, 4-pin, D-coded","ERROR LED":"Yes; red LED","MAINT LED":"Yes; Yellow LED","PROFIsafe":"No","CIP Safety":"No","Modbus TCP":"Yes","Wire-break":"Yes; DI, input current < 0.3 mA, per channel","on S7-400H":"Yes","EtherNet/IP":"Yes","Lower Limit":"0.5 A: 48 ohms / 2 A: 12 ohms","Port type A":"Yes; via 3-core cable","Port type B":"No","Upper Limit":"4 kΩ","description":"SIMATIC ET 200eco PN, CM 4x IO-Link + DIQ 12x 24 V DC/0.5 A/2 A, M12-L, 8x M12, 4x port class A channel diagnostics, shared device, with 2 controllers, prioritized startup, MRP, S2 redundancy, I&M0...3, multi-fieldbus, PN IO, EtherNet/IP, Modbus TCP, degree of protection IP67 / IP69K","Autocrossing":"Yes","For Uprating":"No","In Groups Of":"2 load groups for 4 or 8 outputs each","2-Wire Sensor":"Yes","Master backup":"Possible with function block IO_LINK_MASTER","Shared device":"Yes; 2x EtherNet/IP Scanner","on S7-1500R/H":"Yes","For Signal \"0\"":"-3 to +5V","For Signal \"1\"":"+11 to +30V","Autonegotiation":"Yes","Number of ports":"2","Parameterizable":"Yes","Weight, approx.":"780 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"0.5 A: 100 µs / 2 A: 150 µs; at rated load","\"1\" To \"0\", Max.":"0.5 A: 150 µs / 2 A: 2.5 ms; at rated load","24 V DC circuits":"707 V DC (type test)","Current-sourcing":"Yes","Cycle time, min.":"2 ms","Diagnostic alarm":"Yes; Parameterizable","Firmware version":"V5.1.x","Isochronous mode":"No","Power loss, typ.":"9.7 W","Rated value (DC)":"24 V","Unshielded, Max.":"30 m","H-Sync forwarding":"Yes","Integrated Switch":"Yes","Number of outputs":"4","Source/sink input":"P-reading","Transmission rate":"4.8 kBaud (COM1); 38.4 kBaud (COM2), 230 kBaud (COM3)","FW update possible":"Yes","Hardware interrupt":"Yes; Parameterizable","On Lamp Load, Max.":"1 Hz","PROFINET IO Device":"Yes","up to 60 °C, max.":"12","Prioritized startup":"Yes","Read Coils (Code=1)":"Yes","Between The Channels":"Yes","For Signal \"1\", Min.":"1L+ (-0.8 V) / 2L+ (-0.8 V)","For Signal \"1\", Typ.":"2.5 mA","HW functional status":"FS01","I/O request interval":"2 ms","IO-Link protocol 1.0":"Yes","IO-Link protocol 1.1":"Yes","Output current, max.":"2 A; Per channel","Maintenance interrupt":"Yes; Parameterizable","Open IE communication":"Yes","CIP Explicit Messaging":"Yes","CIP Implicit Messaging":"Yes","Channel status display":"Yes; green LED","Current per group, max.":"1L+: 2 A / 2L+: 5.5 A","DLR (Device Level Ring)":"No","For Channel Diagnostics":"Yes; red LED","IP degree of protection":"IP65/67/69K","Transmission rate, max.":"100 Mbit/s","Current per module, max.":"7.5 A","Number of digital inputs":"12; Parameterizable as DIQ","Response threshold, typ.":"0.5 A: 1 A / 2 A: 3 A","Short-circuit protection":"Yes; per channel, electronic","Between The Load Voltages":"Yes","LargeForwardOpen (Class3)":"No","Number of digital outputs":"12; Parameterizable as DIQ","Via Three-Wire Connection":"Yes","With Inductive Load, Max.":"0.5 Hz","With Resistive Load, Max.":"0.5 A: 100 Hz / 2 A: 40 Hz","For Signal \"1\" Rated Value":"0.5 A / 2 A","Parameter change by master":"No","Write Single Coil (Code=5)":"Yes","Controlling a digital input":"Yes","For load voltage monitoring":"Yes; green LED","Reverse polarity protection":"Yes; against destruction","from load voltage 2L+, max.":"12 A; Maximum value","Configuration without S7-PCT":"Possible; autostart/manual function","Device identifier (DeviceID)":"0306H","Modbus TCP Security Protocol":"No","Short-circuit encoder supply":"Yes; Per channel","Cable length unshielded, max.":"20 m","Connection display LINK TX/RX":"Yes; green LED, only link","Monitoring the supply voltage":"Yes","Number of PROFINET interfaces":"1","Read Discrete Inputs (Code=2)":"Yes","Substitute values connectable":"Yes","Address space per module, max.":"300 byte","Write Multiple Coils (Code=15)":"Yes","Access-consistent address space":"2 byte","Address space per station, max.":"300 byte","Design of electrical connection":"4/5-pin M12 circular connectors","Diagnostic information readable":"Yes","Digital inputs, parameterizable":"Yes","For Redundant Control Of A Load":"Yes","Number of connections per slave":"12","PROFINET system redundancy (R1)":"No","PROFINET system redundancy (S2)":"Yes","Read Holding Registers (Code=3)":"Yes","Requested Packet Interval (RPI)":"2 ms","Memory size for device parameter":"2 kbyte; for each port","between Ethernet and electronics":"Yes","Current consumption (rated value)":"70 mA; without load","Supports protocol for PROFINET IO":"Yes","Remark On Safety-Oriented Shutdown":"https://support.industry.siemens.com/cs/de/de/view/39198632","Write Multiple Registers (Code=16)":"Yes","permissible range, lower limit (DC)":"20.4 V","permissible range, upper limit (DC)":"28.8 V","Of Which Simultaneously Controllable":"4","Size of process data, input per port":"33 byte","For Signal \"0\" Residual Current, Max.":"0.1 mA","Size of process data, output per port":"32 byte","For Signal \"1\" Permissible Range, Max.":"0.5 A / 2 A","PROFINET from GSD version/GSD revision":"GSDML V2.3.x","Size of process data, input per module":"132 byte","Number of configurable submodules, max.":"6","Size of process data, output per module":"128 byte","Multi Fieldbus Configuration Tool (MFCT)":"V1.4.1 or higher","Device ID according to ODVA (Product code)":"0FADH","Monitoring of the supply voltage (PWR-LED)":"Yes; green LED","from load voltage 1L+ (unswitched voltage)":"12 A; Maximum value","Limitation of inductive shutdown voltage to":"0.5 A: Type 1L+ (-70 V) / 2 A: Type (-18 V)","Number of scanners with shared device, max.":"2","Manufacturer ID according to ODVA (VendorID)":"04E3H","Test voltage for interface, rms value [Vrms]":"1 500 V; According to IEEE 802.3","power supply according to NEC Class 2 required":"No","Number of IO Controllers with shared device, max.":"2","Design of electrical connection for supply voltage":"M12, 4-pin, L-coded","Permissible Quiescent Current (2-Wire Sensor), Max.":"1.5 mA","Ambient air temperature-barometric pressure-altitude":"Up to max. 5 000 m, at installation height > 2 000 m additional restrictions","STEP 7 TIA Portal configurable/integrated from version":"STEP 7 V17 or higher with HSP 0378","Suitable for safety-related tripping of standard modules":"No","Design of electrical connection for the inputs and outputs":"M12, 5-pin, A-coded","Between The Channels And The Power Supply Of The Electronics":"8 channels are non-isolated and 8 channels are isolated from supply voltage 1L+"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/eaa2d09cb181f4f534f179bc0da588d0.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1670626&mlfb=6ES7148-6JE00-0BB0"},"ai":{"faq":[{"question":"Will the 6ES7148-6JE00-0BB0 drop in for a 6ES7148-4FA00-0AB0?","answer":"No. The 6ES7148-6JE00-0BB0 is an ET 200SP module with a 45 mm width and backplane bus; the 4FA00-0AB0 is an ET 200S module with a different form factor. Panel wiring and mounting rail differ."},{"question":"What is the digital output current rating?","answer":"The digital outputs are rated at max 100 mA per channel."},{"question":"Does it support IO-Link?","answer":"Yes. It is an IO-Link master module with two M12, 4-pin D-coded ports."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7148-6JE00-0BB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7148-6JE00-0BB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}