{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7148-6JJ00-0BB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7148-6JJ00-0BB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7148-6JJ00-0BB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7148-6JJ00-0BB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC ET 200SP IO-Link master, 6ES7148-6JJ00-0BB0, 8 DI / 8 DQ, 2x M12 PROFINET, IRT 250 µs.","salesMarkdown":"## IO-Link Master on a 45 mm Footprint The Siemens 6ES7148-6JJ00-0BB0 is a SIMATIC ET 200SP IO-Link master module carrying 8 digital inputs and 8 digital outputs (outputs limited to 100 mA per channel) in a 45 mm wide housing. Two M12, D-coded ports connect the device to PROFINET with full IRT support down to 250 µs update time and MRP for ring redundancy. The module simultaneously supports EtherNet/IP or Modbus TCP via the same physical port, so a single hardware variant covers both fieldbus and IT-converged networks. Ambient range spans -40 to +60 °C, making it suitable for unheated enclosures or turbine-hall peripheral cabinets, provided that the enclosure maintains the upper limit. IO-Link (port type A, 3-core cable) is included on board, enabling smart sensor/actuator parameterisation without an additional gateway. ## Not a Drop-in for S7-1500 DI Modules The 6ES7522-1BH01-0AB0 is a 16-channel DI module using a 40-pin front connector and a different backplane (U-connector), lacking IO-Link, IRT, and DQ channels. The 6ES7148 uses M12 ports and an ET 200SP base unit; no wiring commonality. ## Mounting and Connection 45 mm wide, 200 mm tall, 48 mm deep — fits standard ET 200SP mounting rails. Both M12 ports are D-coded for PROFINET and support auto-crossover. The module carries run, error, maintenance, IO, and NS/MS status LEDs; a red-green-yellow IO LED aids channel-level diagnostics. Wire-break detection on the digital inputs triggers when input current drops below 0.3 mA. The input and output process data maps sit at 271 input bytes plus 8 QI bytes, and 257 output bytes. I&M data (0 through 3) is supported for asset management. No PROFIsafe or CIP Safety — this module is for standard functional safety separation, not integrated fail-safe logic.","metaTitle":"Siemens 6ES7148-6JJ00-0BB0 IO-Link Master, 2xM12, IRT","metaDescription":"SIMATIC ET 200SP IO-Link master with 8 DI/8 DQ, IRT 250 µs, MRP, dual M12 ports for PROFINET. 45 mm wide, -40 to +60 °C. Sourced to RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC Communication Modules"],"specifications":{"DI":"Yes","DQ":"Yes; max. 100 mA","ARP":"Yes","IRT":"Yes; 250 µs to 4 ms in 125 µs frame","MRP":"Yes","MSI":"Yes","MSO":"Yes","LLDP":"Yes","Max.":"60 °C","Min.":"-40 °C","SNMP":"Yes","Depth":"48 mm","Width":"45 mm","title":"6ES7148-6JJ00-0BB0","Height":"200 mm","IO LED":"Yes; red-green-yellow LED","Inputs":"271 byte; + 8 bytes for QI information","MS LED":"Yes; green/red LED","NS LED":"Yes; green/red LED","TCP/IP":"Yes; (only EtherNet/IP or Modbus TCP)","Counter":"No","IO-Link":"Yes","Outputs":"257 byte","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","M12 port":"Yes; 2x M12, 4-pin, D-coded","ERROR LED":"Yes; red LED","MAINT LED":"Yes; Yellow LED","PROFIsafe":"No","CIP Safety":"No","Modbus TCP":"Yes","Wire-break":"Yes; DI, input current < 0.3 mA, per channel","on S7-400H":"Yes","EtherNet/IP":"Yes","Lower Limit":"48 Ω","Port type A":"Yes; via 3-core cable","Port type B":"No","Upper Limit":"4 kΩ","description":"SIMATIC ET 200eco PN, CM 8x IO-Link + DIQ 8x 24 V DC/0.5 A, M12-L, 8x M12, 8x port class A channel diagnostics, shared device, with 2 controllers, prioritized startup, MRP, S2 redundancy, I&M0...3, multi-fieldbus, PN IO, EtherNet/IP, Modbus TCP, degree of protection IP67 / IP69K","Autocrossing":"Yes","For Uprating":"No","In Groups Of":"8","2-Wire Sensor":"Yes","Master backup":"Possible with function block IO_LINK_MASTER","Shared device":"Yes; 2x EtherNet/IP Scanner","on S7-1500R/H":"Yes","For Signal \"0\"":"-3 to +5V","For Signal \"1\"":"+11 to +30V","Interface type":"PROFINET with 100 Mbit/s full duplex (100BASE-TX)","Autonegotiation":"Yes","Number of ports":"2","Parameterizable":"Yes","Weight, approx.":"780 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"100 µs","\"1\" To \"0\", Max.":"150 µs","24 V DC circuits":"707 V DC (type test)","Current-sourcing":"Yes","Cycle time, min.":"2 ms","Diagnostic alarm":"Yes; Parameterizable","Firmware version":"V5.1.x","Isochronous mode":"No","Power loss, typ.":"9.7 W","Rated value (DC)":"24 V","Unshielded, Max.":"30 m","H-Sync forwarding":"Yes","Integrated Switch":"Yes","Number of outputs":"8","Source/sink input":"P-reading","Transmission rate":"4.8 kBaud (COM1); 38.4 kBaud (COM2), 230 kBaud (COM3)","FW update possible":"Yes","Hardware interrupt":"Yes; Parameterizable","On Lamp Load, Max.":"1 Hz","PROFINET IO Device":"Yes","up to 60 °C, max.":"8","Prioritized startup":"Yes","Read Coils (Code=1)":"Yes","Between The Channels":"No","For Signal \"1\", Min.":"1L+ (-0.8V)","For Signal \"1\", Typ.":"2.5 mA","HW functional status":"FS01","I/O request interval":"2 ms","IO-Link protocol 1.0":"Yes","IO-Link protocol 1.1":"Yes","Output current, max.":"2 A; Per channel","Maintenance interrupt":"Yes; Parameterizable","Open IE communication":"Yes","CIP Explicit Messaging":"Yes","CIP Implicit Messaging":"Yes","Channel status display":"Yes; green LED","Current per group, max.":"1L+: 4 A","DLR (Device Level Ring)":"No","For Channel Diagnostics":"Yes; red LED","IP degree of protection":"IP65/67/69K","Transmission rate, max.":"100 Mbit/s","Current per module, max.":"4 A","Number of digital inputs":"8; Parameterizable as DIQ","Response threshold, typ.":"0.5 A: 1 A","Short-circuit protection":"Yes; per channel, electronic","Between The Load Voltages":"Yes","LargeForwardOpen (Class3)":"No","Number of digital outputs":"8; Parameterizable as DIQ","Via Three-Wire Connection":"Yes","With Inductive Load, Max.":"0.5 Hz","With Resistive Load, Max.":"100 Hz","For Signal \"1\" Rated Value":"0.5 A","Parameter change by master":"No","Write Single Coil (Code=5)":"Yes","Controlling a digital input":"Yes","For load voltage monitoring":"Yes; green LED","Reverse polarity protection":"Yes; against destruction","from load voltage 2L+, max.":"12 A; Maximum value","Configuration without S7-PCT":"Possible; autostart/manual function","Device identifier (DeviceID)":"0306H","Modbus TCP Security Protocol":"No","Short-circuit encoder supply":"Yes; Per channel","Cable length unshielded, max.":"20 m","Connection display LINK TX/RX":"Yes; green LED, only link","Monitoring the supply voltage":"Yes","Number of PROFINET interfaces":"1","Read Discrete Inputs (Code=2)":"Yes","Substitute values connectable":"Yes","Address space per module, max.":"300 byte","Write Multiple Coils (Code=15)":"Yes","Access-consistent address space":"2 byte","Address space per station, max.":"300 byte","Design of electrical connection":"4/5-pin M12 circular connectors","Diagnostic information readable":"Yes","Digital inputs, parameterizable":"Yes","For Redundant Control Of A Load":"Yes","Number of connections per slave":"12","PROFINET system redundancy (R1)":"No","PROFINET system redundancy (S2)":"Yes","Read Holding Registers (Code=3)":"Yes","Requested Packet Interval (RPI)":"2 ms","Memory size for device parameter":"2 kbyte; for each port","between Ethernet and electronics":"Yes","Current consumption (rated value)":"70 mA; without load","Supports protocol for PROFINET IO":"Yes","Write Multiple Registers (Code=16)":"Yes","permissible range, lower limit (DC)":"20.4 V","permissible range, upper limit (DC)":"28.8 V","Of Which Simultaneously Controllable":"8","Size of process data, input per port":"33 byte","For Signal \"0\" Residual Current, Max.":"0.1 mA","Size of process data, output per port":"32 byte","For Signal \"1\" Permissible Range, Max.":"0.5 A","PROFINET from GSD version/GSD revision":"GSDML V2.3.x","Size of process data, input per module":"264 byte","Number of configurable submodules, max.":"10","Size of process data, output per module":"256 byte","Multi Fieldbus Configuration Tool (MFCT)":"V1.4.1 or higher","Device ID according to ODVA (Product code)":"0FACH","from load voltage 1L+ (unswitched voltage)":"12 A; Maximum value","Limitation of inductive shutdown voltage to":"0.5 A: typ. 1L+ (-70 V)","Number of scanners with shared device, max.":"2","Manufacturer ID according to ODVA (VendorID)":"04E3H","Test voltage for interface, rms value [Vrms]":"1 500 V; According to IEEE 802.3","power supply according to NEC Class 2 required":"No","Number of IO Controllers with shared device, max.":"2","Design of electrical connection for supply voltage":"M12, 4-pin, L-coded","Permissible Quiescent Current (2-Wire Sensor), Max.":"1.5 mA","Ambient air temperature-barometric pressure-altitude":"Up to max. 5 000 m, at installation height > 2 000 m additional restrictions","STEP 7 TIA Portal configurable/integrated from version":"STEP 7 V17 or higher with HSP 0378","Suitable for safety-related tripping of standard modules":"No","Design of electrical connection for the inputs and outputs":"M12, 5-pin, A-coded"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$251.46","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/eaa2d09cb181f4f534f179bc0da588d0.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1670627&mlfb=6ES7148-6JJ00-0BB0"},"ai":{"faq":[{"question":"Will the 6ES7148-6JJ00-0BB0 drop into a panel that was wired for the 6ES7522-1BH01-0AB0 without rewiring?","answer":"No. The 6ES7148-6JJ00-0BB0 connects via two M12, D-coded PROFINET ports and mounts on an ET 200SP base unit. The 6ES7522-1BH01-0AB0 uses a 40-pin front connector and a different backplane. All field wiring and network cabling would need to be replaced."},{"question":"What is the maximum output current per channel?","answer":"100 mA per DQ channel, as listed in the specifications."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7148-6JJ00-0BB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7148-6JJ00-0BB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}