{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7154-3AB00-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7154-3AB00-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7154-3AB00-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7154-3AB00-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens IM 154-3 PN interface module 6ES7154-3AB00-0AB0, PROFINET IO, 100 Mbit/s, MRP, ARP, LLDP, IP65/67, -40 to 70 °C, 24 V DC.","salesMarkdown":"## PROFINET IO interface with MRP and ARP The Siemens 6ES7154-3AB00-0AB0 is an IM 154-3 PN interface module for the ET 200PRO distributed I/O system, connecting the remote rack to a PROFINET IO network at 100 Mbit/s with autonegotiation. It supports MRP (Media Redundancy Protocol) for ring-topology fault tolerance and ARP (Address Resolution Protocol) for IP-to-MAC mapping, plus LLDP for topology discovery — the three protocols that let a PROFINET controller rebuild the network map after a cable break without a PLC program download. ## IP65/67 sealed for direct machine mounting Rated IP65/67, the module is sealed against washdown and dust ingress — it mounts directly on the machine frame without an enclosure, typical for food-and-bev or automotive body-shop lines where the I/O rack lives next to the actuators. The 90 x 130 x 60 mm footprint (width x height x depth) fits the ET 200PRO profile; hot swapping of modules is possible, so a failed slice can be replaced without powering down the backplane. ## Diagnostic and monitoring signals Front-panel LEDs cover LINK, MAINT, RX/TX, bus fault BF (red), group error SF (red), and 24 V supply monitoring ON (green). Diagnostic alarms and hardware interrupts are parameterizable; a swapping interrupt flags when a module is removed or inserted. The fuse in the lower part is exchangeable; the fuse on the IM-LP is not. Reverse polarity protection is provided against destruction, and short-circuit protection is present via the exchangeable fuse.","metaTitle":"Siemens 6ES7154-3AB00-0AB0 IM 154-3 PN, PROFINET IO, IP65/67","metaDescription":"Siemens IM 154-3 PN interface module 6ES7154-3AB00-0AB0 for ET 200PRO. PROFINET IO, 100 Mbit/s, MRP, ARP, LLDP. IP65/67, -40 to 70 °C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC Communication Modules"],"specifications":{"ARP":"Yes","MRP":"Yes","LLDP":"Yes","Max.":"70 °C","Min.":"-40 °C","Ping":"Yes","SNMP":"Yes","Depth":"60 mm","Width":"90 mm","title":"6ES7154-3AB00-0AB0","Height":"130 mm","Inputs":"256 byte","Outputs":"256 byte","LINK LED":"Yes","MAINT LED":"Yes","RX/TX LED":"Yes","description":"SIMATIC DP, PROFINET Interface module IM 154-3 PN, High Feature for ET 200 PRO, Integrated switch, incl. termination module, Connection modules 6ES7194-4AK00-0AA0 order separately","Autonegotiation":"Yes","Weight, approx.":"375 g","lifecycle_stage":"current","Diagnostic alarm":"Yes; Parameterizable","Power loss, typ.":"5 W","Rated value (DC)":"24 V","Bus fault BF (red)":"Yes","Hardware interrupt":"Yes; Parameterizable","Swapping interrupt":"Parameterizable","Interfaces/bus type":"PROFINET IO","Group error SF (red)":"Yes","Isolation tested with":"707 V DC (type test)","Hot swapping of modules":"possible","IP degree of protection":"IP65/67","Transmission rate, max.":"100 Mbit/s","Short-circuit protection":"Yes; Fuse in lower part is exchangeable, the fuse on the IM-LP is not","For load voltage monitoring":"Yes","Reverse polarity protection":"Yes; against destruction","Device identifier (DeviceID)":"0x0305","from supply voltage 1L+, max.":"300 mA","Between Backplane Bus And Electronics":"No","Between Supply Voltage And Electronics":"Yes","Monitoring 24 V voltage supply ON (green)":"Yes","power supply according to NEC Class 2 required":"No","Startup if setpoint not equal to actual configuration":"Parameterizable"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$212.09 – $619.33","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c711c0364c4f1f857167df073ba9e324.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=906819&mlfb=6ES7154-3AB00-0AB0"},"ai":{"faq":[{"question":"Can 6ES7154-3AB00-0AB0 replace 6ES7154-3AB00-0AA0?","answer":"Yes, the -0AB0 is the direct successor to the -0AA0 revision. The -0AB0 adds MRP and LLDP protocol support. A direct swap is mechanically compatible, but verify that the PROFINET controller firmware supports the additional protocols if you rely on ring redundancy or topology discovery."},{"question":"What connectors are required for 6ES7154-3AB00-0AB0?","answer":"The module uses PROFINET RJ45 connectors for the network interface and a 24 V DC supply via the ET 200PRO backplane connector. The IP65/67 rating requires the mating connectors to be sealed — use M12 or push-pull PROFINET connectors rated for the same environmental class."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7154-3AB00-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7154-3AB00-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}