{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7193-6UP00-0DP1","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7193-6UP00-0DP1","canonicalUrl":"https://aoctrl.com/siemens/6ES7193-6UP00-0DP1","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7193-6UP00-0DP1","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC ET 200SP, Potential distributor module, PotDis-BaseUnit PotDis-BU Typ P1, light-colored, 17 x P1-potential, 1 x P2-potential, Push-In terminals, 15 mm width, 35 mm depth, 117 mm height.","salesMarkdown":"## What the 10 A P1/P2 bus rating means for your ET 200SP slice The 6ES7193-6UP00-0DP1 is a potential distributor base unit for the Siemens ET 200SP distributed I/O system. It creates a new potential group, meaning the P1 and P2 bus rails are disconnected from the left neighbor, letting you run a separate 48 V supply (max 10 A) for a group of I/O modules downstream. The 10 A rating on the P1 and P2 bus and the 48 V max supply voltage define the power budget for the downstream modules in that potential group. If your downstream I/O slice draws more than 10 A total, you need another potential distributor further down the rail. ## Push-in termination and panel fit The 15 mm width and 35 mm depth mean it occupies a single slot on the ET 200SP mounting rail, leaving room for adjacent I/O modules. The 117 mm height matches the standard ET 200SP form factor. The module provides 17 terminals connected to P1 potential and 1 terminal to P2 potential. The AUX rail is not connected through this base unit — the potential group is isolated from the left neighbor, so you bring in fresh P1 and P2 supply wires at this point.","metaTitle":"Siemens 6ES7193-6UP00-0DP1 Potential Distributor","metaDescription":"Active Siemens ET 200SP potential distributor module. 15 mm wide, push-in terminals, 10 A P1/P2 bus at 48 V. Creates a new potential group. Available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLC I/O & Expansion Modules"],"specifications":{"Depth":"35 mm","Width":"15 mm","title":"6ES7193-6UP00-0DP1","Height":"117 mm","description":"SIMATIC ET 200SP, Potential distributor module, PotDis-BaseUnit PotDis-BU Typ P1, light-colored, 17 x P1-potential, 1 x P2-potential, Push-In terminals. P1-, P2- and AUX-rail diconnected from left BU, Packaging Unit: 1 Piece, WxH: 15mm x 117mm","Terminal type":"Push-in terminal","Number of slots":"1","Weight, approx.":"40 g","lifecycle_stage":"current","For P1 and P2 bus":"48 V; max.","New potential group":"Yes","HW functional status":"FS10 and higher","For Process Terminals":"CC62","Isolation tested with":"3 250 V DC","For P1 and P2 bus, max.":"10 A","For process terminals, max.":"10 A","Vertical Installation, Max.":"50 °C","Vertical Installation, Min.":"-30 °C","Conductor cross-section, max.":"2.5 mm²","Conductor cross-section, min.":"0.14 mm²","Horizontal Installation, Max.":"60 °C","Horizontal Installation, Min.":"-30 °C","Potential group continued from the left":"No","Between Backplane Bus And Supply Voltage":"Yes","External Protection For Power Supply Lines":"Yes; 10 A miniature circuit breaker with type B or C tripping characteristic for the respective rated supply voltage","Installation altitude above sea level, max.":"5 000 m; Restrictions for installation altitudes > 2 000 m, see manual","Number of terminals with connection to P1 and P2 bus":"17 terminals to P1, 1 terminal to P2","Color code for module-specific color identification plate":"CC62"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$27.94","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b5bd4b04d91c495c58cf0947210529f4.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1109118&mlfb=6ES7193-6UP00-0DP1"},"ai":{"faq":[{"question":"What is the current rating for P1 and P2 buses on the 6ES7193-6UP00-0DP1?","answer":"The P1 and P2 buses are rated for 10 A maximum at 48 V. This sets the power budget for the downstream I/O modules in the new potential group."},{"question":"Is the AUX rail connected through this base unit?","answer":"No, the AUX rail is not connected through this base unit. The potential group is not continued from the left, meaning the P1, P2, and AUX rails are isolated from the left neighbor."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7193-6UP00-0DP1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7193-6UP00-0DP1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}