{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7332-5RD00-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7332-5RD00-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7332-5RD00-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7332-5RD00-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC S7 SM 332 analog output module, 6ES7332-5RD00-0AB0, 4 isolated AO, 0/4-20 mA, Ex(i) rated, 15-bit resolution, diagnostics-capable, PTB tested.","salesMarkdown":"## Ex(i) isolated analog outputs — what the specs mean for a hazardous-area loop The Siemens 6ES7332-5RD00-0AB0 is a SIMATIC S7 SM 332 analog output module with four isolated current outputs for signals from the hazardous area, carrying ATEX [EEx ib] IIC and FM Class I, Division 2 approvals — meaning it can drive 4-20 mA loops into Zone 1 / Division 2 locations without a separate barrier, provided the external capacitance and inductance stay under 850 nF and 6.6 mH respectively. Each output delivers 0 to 20 mA or 4 to 20 mA into a load up to 500 Ω, with a no-load voltage of 14 V and short-circuit current limited to 70 mA — the loop power budget is tight, so the actuator impedance plus cable resistance must sum below that 500 Ω ceiling or the output compliance drops. ## Lifecycle status — EOL, sourced through independent channels For a BOM that requires the same 20-pin front connector footprint and Ex(i) isolation, the closest functional sibling is the 6ES7332-5RD00-0AB1 — but that is a different revision with potentially different firmware behavior; verify the GSD file and hardware catalog entry in your TIA Portal version before committing. ## Panel fit and supply rails The module occupies one S7-300 slot at 40 mm wide, 125 mm tall, 120 mm deep — standard form factor for the rack. It draws 80 mA from the 5 V backplane bus and up to 200 mA from the 24 V load supply L+ (without load), with a typical power loss of 4 W. A 20-pin front connector (not included) is required for field wiring.","metaTitle":"Siemens 6ES7332-5RD00-0AB0 SM 332 Analog Output Module","metaDescription":"Siemens 6ES7332-5RD00-0AB0 SM 332 analog output module, 4 isolated AO for hazardous areas, 0/4-20 mA, 15-bit, EOL. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Analog Output Modules"],"specifications":{"Max.":"60 °C","Depth":"120 mm","Width":"40 mm","title":"6ES7332-5RD00-0AB0","Height":"125 mm","Overrange":"Yes","0 to 20 mA":"Yes","FM marking":"Class I, Division 2, Group A, B, C, D T4","description":"SIMATIC S7, analog output SM 332, isolated, 4 AA; 0/4 to 20 mA, 20-pole, for signals from the hazardous area, diagnostics-capable, PTB tested","ATEX marking":"[EEx ib] IIC","4 mA to 20 mA":"Yes","Shielded, Max.":"200 m","Test number PTB":"Ex-96.D.2026X","Weight, approx.":"280 g","lifecycle_stage":"eol_hot","Power loss, typ.":"4 W","Rated value (DC)":"24 V","Between The Channels":"Yes","Diagnostics function":"Yes","Group error SF (red)":"Yes","Po (power output), max.":"440 mW","Number of analog outputs":"4","Required Front Connector":"20-pin","Uo (no-load voltage), max.":"14 V","With Current Outputs, Max.":"500 Ω","Module for Ex(i) protection":"Yes","Reverse polarity protection":"Yes","Wire-break in actuator cable":"Yes","Channel fault indicator F (red)":"Yes","from backplane bus 5 V DC, max.":"80 mA","Io (short-circuit current), max.":"70 mA","Current output, no-load voltage, max.":"14 V","Between The Channels And Backplane Bus":"Yes","Between the channels and load voltage L+":"Yes","Co (permissible external capacity), max.":"850 nF","Current, relative to output range, (+/-)":"0.2 %","Voltage output, short-circuit protection":"Yes","from load voltage L+ (without load), max.":"200 mA","Lo (permissible external inductivity), max.":"6.6 mH","Voltage output, short-circuit current, max.":"70 mA","Resolution with overrange (bit including sign), max.":"15 bit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$882.65 – $1,114.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3cffab4bab7773e23a0b8addf162d6f4.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=116328&mlfb=6ES7332-5RD00-0AB0"},"ai":{"faq":[{"question":"What is the replacement for 6ES7332-5RD00-0AB0?","answer":"There is no official pin-compatible successor from Siemens for this Ex(i) variant. The closest functional sibling is the 6ES7332-5RD00-0AB1 revision, but verify GSD file compatibility in your TIA Portal version before specifying."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7332-5RD00-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7332-5RD00-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}