{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7332-5TB10-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7332-5TB10-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7332-5TB10-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7332-5TB10-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC S7-300 SM 332 analog output module, 6ES7332-5TB10-0AB0, 2 channels, 4 to 20 mA / 0 to 20 mA, Ex i, FM Class I Div 2, ATEX II 3 G, 24 V DC, 40 ms conversion time.","salesMarkdown":"## Two analog outputs with hazardous-area clearance The 6ES7332-5TB10-0AB0 is a 2-channel analog output module for the SIMATIC S7-300 family, delivering 4 to 20 mA or 0 to 20 mA signals per channel. It carries both FM (Class I, Division 2, Groups A–D T4; Class I, Zone 2, Group IIC T4) and ATEX (II 3 G Ex nA [ib Gb] IIC T4 Gc) approvals, meaning it is certified for installation in Zone 2 gas and Division 2 classified locations when the associated intrinsic-safety barriers are in place. Each channel is isolated from the others at 2500 V DC, and the module allows a permitted potential difference (UCM) of 60 V DC / 30 V AC between outputs in hazardous-area signal circuits. The open-circuit voltage Uo is limited to 19 V, and the maximum output power Po is 506 mW — figures that keep the loop energy below the ignition threshold for the gas groups listed on the nameplate. ## End-of-life — sourcing the 6ES7332-5TB10-0AB0 There is no drop-in replacement that fits the S7-300 rail. ## Loop drive and diagnostic capability The module drives current outputs into a maximum load of 650 Ω per channel at 24 V DC supply. Conversion time is 40 ms per channel, and the cycle time for all channels is 5 ms max. A wire-break detection circuit triggers when the output current falls below 0.5 mA — useful for catching an open loop before the process drifts. Diagnostics are parameterizable: a group error LED (SF, red) and per-channel fault indicators (F, red) report wire-break, short-circuit, and overrange conditions. Substitute values can be configured per channel to hold a safe output state on fault. ## Physical fit — S7-300 slot, 20-pin front connector Rated supply is 24 V DC with reverse-polarity protection. Typical power dissipation is 3.5 W. The maximum ambient temperature is 60 °C, which sets the upper limit for cabinet internal temperature around the module row.","metaTitle":"Siemens 6ES7332-5TB10-0AB0 Analog Output Module","metaDescription":"Siemens 6ES7332-5TB10-0AB0 SIMATIC S7-300 analog output module. 2 channels, 4-20 mA / 0-20 mA, Ex i / FM / ATEX rated.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Analog Output Modules"],"specifications":{"Max.":"60 °C","Depth":"120 mm","Width":"40 mm","title":"6ES7332-5TB10-0AB0","Height":"125 mm","Overrange":"Yes","0 to 20 mA":"Yes","FM marking":"Class I, Division 2, Group A, B, C, D T4; Class I, Zone 2, Group IIC T4","Wire-break":"Yes; as of output value > 0.5 mA","FM approval":"Yes","description":"SIMATIC DP, HART analog output, SM 332, 2 AO, 0/4 - 20 mA HART, as of HART Rev. 5.0, for ET200M with IM 153-2, 1 x 20-pole","ATEX marking":"ATEX II 3 G (2) GD Ex nA [ib Gb] [ib IIIC Db] IIC T4 Gc","4 mA to 20 mA":"Yes","Current, max.":"60 mA / -1 A","Shielded, Max.":"400 m","Weight, approx.":"290 g","lifecycle_stage":"eol_hot","-20 mA to +20 mA":"No","Between channels":"2 500 V DC","Diagnostic alarm":"Yes; Parameterizable","Power loss, typ.":"3.5 W","Rated value (DC)":"24 V","For Inductive Load":"2.5 ms","For Resistive Load":"2.5 ms","For Capacitive Load":"4 ms","Between The Channels":"Yes","Diagnostics function":"Yes; Parameterizable","Group error SF (red)":"Yes; red LED","IP degree of protection":"IP20","Po (power output), max.":"506 mW","Number of analog outputs":"2","Required Front Connector":"20-pin","HART communication active":"Yes; green LED (H)","between the outputs (UCM)":"60 V DC/30 V AC permitted potential difference (Viso) of signals from hazardous areas","Uo (no-load voltage), max.":"19 V","With Current Outputs, Max.":"650 Ω","Module for Ex(i) protection":"Yes","Reverse polarity protection":"Yes","Conversion time (per channel)":"40 ms","Substitute values connectable":"Yes; Parameterizable","Cycle time (all channels) max.":"5 ms","Channel fault indicator F (red)":"Yes; per channel","from backplane bus 5 V DC, max.":"100 mA","Io (short-circuit current), max.":"66 mA","Voltages at the outputs towards MANA":"max. 17 V / -0.5 V","Current output, no-load voltage, max.":"19 V","Load voltage L+ against backplane bus":"500 V DC","Between The Channels And Backplane Bus":"Yes","For Current Output Two-Wire Connection":"Yes","Between the channels and load voltage L+":"Yes","Co (permissible external capacity), max.":"230 nF","Current, relative to output range, (+/-)":"0.15 %","from load voltage L+ (without load), max.":"150 mA","With Current Outputs, Inductive Load, Max.":"7.5 mH","Lo (permissible external inductivity), max.":"7.5 mH","Channels against backplane bus and load voltage L+":"2 500 V DC","Resolution with overrange (bit including sign), max.":"12 bit; + sign","Um (voltage at non-intrinsically safe connecting terminals), max.":"60 V; DC"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a4f79519c1fd0bbbcc927cd32cbf5657.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1395&mlfb=6ES7332-5TB10-0AB0"},"ai":{"faq":[{"question":"Where can I buy the 6ES7332-5TB10-0AB0?","answer":"Submit an RFQ for your required quantity."},{"question":"What is the replacement for 6ES7332-5TB10-0AB0?","answer":"Siemens has not published an official successor order code for this Ex i variant. The closest functional equivalents in the current S7-1500 portfolio (6ES7511-1AK02-0AB0 or 6ES7513-1AL01-0AB0) are different form factors and require a different rack. There is no drop-in replacement for the S7-300 backplane."},{"question":"Is 6ES7332-5TB10-0AB0 compatible with ET200M?","answer":"Yes. The 6ES7332-5TB10-0AB0 is an S7-300 SM 332 module and fits into an ET200M distributed I/O station when used with an IM 153 interface module. The 40 mm width and 20-pin front connector are standard for the S7-300 form factor used in ET200M racks."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7332-5TB10-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7332-5TB10-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}