{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7467-5FJ00-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7467-5FJ00-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7467-5FJ00-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7467-5FJ00-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC S7-400 IM467 FO PROFIBUS-DP master interface, 6ES7467-5FJ00-0AB0, fiber optic, 12 Mbit/s, 96 DP slaves, 244 byte I/O, single-width 25 mm.","salesMarkdown":"The Siemens 6ES7467-5FJ00-0AB0 is a SIMATIC S7-400 IM467 FO PROFIBUS-DP master interface that connects field devices per the PROFIBUS-DP standard, designed for use in S7-400 racks. It communicates via fiber optic cable (FOC) at 660 nm wavelength, supporting equidistant bus cycles and direct data exchange (slave-to-slave communication) — critical for synchronized drive lines or time-sensitive sensor arrays where jitter matters. Transmission rate hits 12 Mbit/s (note: 3 and 6 Mbit/s rates are not supported), and the interface handles up to 96 DP slaves with a maximum of 244 input bytes and 244 output bytes per frame. It draws 1 300 mA from the 5 V DC backplane bus, so budget that into your S7-400 power supply calculation — a standard PS 407 10A leaves plenty of headroom, but a fully loaded rack with multiple IM467s adds up fast. The module occupies one single-width slot (25 mm) in the S7-400 rack, with a depth of 210 mm and height of 290 mm — same footprint as a standard S7-400 interface module. ## Environmental range — built for the pit The 95 % humidity tolerance at 26 °C means condensation cycles won't kill it. Installation altitude goes to 3 000 m above sea level — fine for most mine sites, but if your control room sits at 4 000 m in the Andes, you'll need to derate or look at forced cooling. No official successor part is listed. If you're designing a new line, the S7-1500 with a CM 1542-5 PROFIBUS DP master is the architectural replacement, but that's a platform migration, not a slot swap. For existing S7-400 racks, this IM467 remains the direct fit. ## What it connects to and how it mounts Two duplex fiber optic sockets on the front plate — one for the PROFIBUS segment, one for daisy-chaining or redundant ring topologies. No copper RS-485 on this variant; you're committing to FO cable plant. Snaps into any S7-400 central rack (CR) or expansion rack (ER) slot. The number of IM467 modules you can fit depends on the CPU type — typically up to 10 in the CR, with a maximum of 32 connections total per CPU.","metaTitle":"Siemens 6ES7467-5FJ00-0AB0 IM467 FO PROFIBUS DP Master, 12 M","metaDescription":"SIMATIC S7-400 interface IM467 FO PROFIBUS-DP master. Fiber optic, 12 Mbit/s, 96 slaves, 244 byte I/O. Mature lifecycle, sourced to order. -40 to 70 °C, 25 mm single slot.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLC Communication Modules"],"specifications":{"Max.":"70 °C","Min.":"-40 °C","Depth":"210 mm","Width":"25 mm","5 V DC":"Yes; ±5 %","Height":"290 mm","24 V DC":"Yes; ±5 %","Physics":"FOC, wavelength 660 nm","Equidistance":"Yes","Inputs, max.":"244 byte","Outputs, max.":"244 byte","Interface type":"2x duplex sockets","Operation, max.":"95 %; at 26 °C","Weight, approx.":"700 g","lifecycle_stage":"mature","PROFIBUS DP master":"Yes","Transmission rate, max.":"12 Mbit/s; Not 3 or 6 Mbit/s","Number of DP slaves, max.":"96","Number of modules per CPU":"10 in the CR (depening on CPU type)","Number of connections, max.":"32; depending on CPU-Type","from backplane bus 5 V DC, max.":"1 300 mA","Installation altitude above sea level, max.":"3 000 m","Direct data exchange (slave-to-slave communication)":"Yes"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=477433&mlfb=6ES7467-5FJ00-0AB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7467-5FJ00-0AB0/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum transmission rate and how many slaves does it support?","answer":"The maximum transmission rate is 12 Mbit/s (3 and 6 Mbit/s are not supported). It handles up to 96 PROFIBUS DP slaves per interface."},{"question":"What are the operating temperature limits?","answer":"The module is rated for -40 °C to 70 °C ambient temperature, with a maximum humidity of 95 % at 26 °C. This covers most industrial and mining environments without special cooling."},{"question":"Does this module use copper or fiber optic cabling?","answer":"It uses fiber optic cable (FOC) at 660 nm wavelength via two duplex sockets. There is no copper RS-485 port on this variant — you need an FO cable plant."},{"question":"How much power does it draw from the backplane?","answer":"It draws 1 300 mA from the 5 V DC backplane bus. Factor that into your S7-400 power supply sizing, especially in racks with multiple interface modules."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7467-5FJ00-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7467-5FJ00-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}