{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"A9A26898","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"A9A26898","canonicalUrl":"https://aoctrl.com/schneider/A9A26898","factsUrl":"https://aoctrl.com/api/mcp/products/A9A26898","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Acti9 iOF+SD 24 auxiliary contact, 1 NO + 1 NC, DC-12 2...100 mA at 24 VDC, spring-loaded Ti24 terminal, clip-on DIN rail mount.","salesMarkdown":"It is rated DC-12 at 2 to 100 mA at 24 VDC, so it is sized for low-level DC switching in control and indication circuits, not for power loads. The 9 mm width clips onto a DIN rail, making it a single-module addition to an Acti9 distribution panel. The DC-12 rating at 2...100 mA, 24 VDC defines the switching capability for resistive DC loads — this contact is not intended for motor or inductive switching. The 1 NO + 1 NC composition gives one changeover function for status feedback and one for fault signalling. Pollution degree 2 and tropicalisation class 2 per IEC 60947-5-1 mean it handles normal factory atmospheres with non-condensing humidity up to 93% at 40 °C. The CE mark confirms compliance for the European market. Clip-on mounting on DIN rail, 9 mm wide — one module pitch. The bottom connection uses a spring-loaded Ti24 terminal accepting 0.5 to 1.5 mm² flexible or rigid cable, with a wire stripping length of 10 mm. The top is compatible with comb busbars and distribution blocks. A mechanical indicator provides local signalling of contact position.","metaTitle":"Schneider Electric A9A26898 iOF+SD 24 Auxiliary Contact, 1 N","metaDescription":"Schneider Electric A9A26898 Acti9 iOF+SD 24 auxiliary contact. 1 NO + 1 NC, DC-12 rated 2-100 mA at 24 VDC. IEC 60947-5-4/5-1. Active lifecycle. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Circuit Breaker Accessories"],"specifications":{"Depth":"73.5 mm","Width":"9 mm","title":"A9A26898","Colour":"White","Height":"85 mm","Standards":"IEC 60947-5-4 IEC 60947-5-1","description":"Auxiliary contact, Acti9 A9A, iOF+SD, 1 NO + 1 NC, 2mA to 100mA, 24VDC, Ti24 connector on bottom (sold separately)","9 Mm Pitches":"1","Mounting mode":"Clip-on","Quality labels":"CE","Tropicalisation":"2 conforming to IEC 60947-5-1","lifecycle_stage":"current","Local signalling":"Mechanical indicator","Mounting support":"DIN rail","Pollution degree":"2 conforming to IEC 60664-1","Range Of Product":"Acti9","Device short name":"iOF+SD 24","Relative humidity":"93 % at 40 °C","Device application":"For Smartlink interface","[In] rated current":"DC-12 2...100 mA at 24 V, DC +/- 20 %","Overvoltage category":"III","Electrical durability":"20000 cycles conforming to IEC 60947-5-4","Wire stripping length":"10 mm","Connections - terminals":"Spring-loaded terminal Ti24 (bottom) 2 cable(s) 0.5...1.5 mm² - flexible Spring-loaded terminal Ti24 (bottom) 2 cable(s) 0.5...1.5 mm² - rigid","Product or component type":"OC and fault contact","Signal contacts composition":"1 NO + 1 NC","[Ui] rated insulation voltage":"500 V conforming to IEC 60664-1","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"-25...70 °C","[Uimp] rated impulse withstand voltage":"6 kV conforming to IEC 60664-1","Comb busbar and distribution block compatibility":"Top: YES"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e65e91cb4aa4e1872534a036dca01d36.pdf","sourceUrl":"https://www.se.com/au/en/product/A9A26898/auxiliary-contact-acti9-a9a-iof+sd-1-no-+-1-nc-2ma-to-100ma-24vdc-ti24-connector-on-bottom-sold-separately/"},"ai":{"faq":[{"question":"Where can I buy the A9A26898 and get a price?","answer":"The A9A26898 is sourced to order against an RFQ through independent distribution. Submit an RFQ for current availability and pricing — no stock or price figures are published here."},{"question":"What is the A9A26898 used for?","answer":"It is an OC and fault contact for the Acti9 range, providing one NO and one NC signal contact rated DC-12 at 2 to 100 mA, 24 VDC. It clips onto a DIN rail and is typically used in Smartlink interface applications for status and fault indication in distribution panels."},{"question":"What are the key dimensions of the A9A26898?","answer":"Width is 9 mm (one module pitch), height is 85 mm, depth is 73.5 mm. It clips onto a standard DIN rail."},{"question":"What compliance standards does the A9A26898 meet?","answer":"It complies with IEC 60947-5-4 and IEC 60947-5-1 for control circuit devices, with CE marking. Rated insulation voltage is 500 V per IEC 60664-1, impulse withstand 6 kV, overvoltage category III, pollution degree 2, and tropicalisation class 2."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/A9A26898","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/A9A26898 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}