{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"A9C15030","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"A9C15030","canonicalUrl":"https://aoctrl.com/schneider/A9C15030","factsUrl":"https://aoctrl.com/api/mcp/products/A9C15030","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Acti9 iCT+ contactor, A9C15030, 1P, 20 A AC-7A/AC-7B, 3.6 kW at 250 V AC, 230 V AC 50 Hz coil, 18 mm wide, DIN-rail mount.","salesMarkdown":"The Schneider Electric A9C15030 is a 1-pole contactor from the Acti9 iCT+ series, designed for remote-controlled switching of control circuits in residential and small commercial installations. Rated operational current is 20 A in both AC-7A (resistive/inductive lighting loads) and AC-7B (motorized loads) categories, with a maximum switching power of 3.6 kW at 250 V AC. Electrical and mechanical durability are each rated at 5,000,000 cycles, giving this component a long service life in frequently switched circuits like lighting groups or small motor starters. The 18 mm width (one modular pitch) means it slots into an existing row without crowding adjacent breakers or busbars. Depth is 60 mm and height 81 mm, so it sits flush in a standard enclosure without protruding past the front cover. IP20 on the body, IP40 in a modular enclosure — suitable for clean, dry indoor panels. For BOM freeze or new design-ins, this part is specified-to-order against an RFQ. No known direct replacement from Schneider; if a second-source is needed, the parametric match must match the 20 A AC-7A/B rating and 1P form factor. The 20 A rating in AC-7A covers resistive and inductive lighting loads (e.g., incandescent, halogen, or LED drivers with inrush). AC-7B extends to small motor loads like fans or pumps — so this one contactor handles both lighting and motorized circuits in a single panel. Pollution degree 3 (IEC 60664-1) means it tolerates conductive pollution in typical residential and commercial environments — no special sealing needed for normal dust or humidity up to 95% at 55 °C. Switching frequency is 6 operations per minute, adequate for most lighting and small motor control; not intended for high-speed cycling like a PLC output.","metaTitle":"Schneider Electric A9C15030 Acti9 iCT+ Contactor, 1P, 20 A,","metaDescription":"Schneider Electric A9C15030 Acti9 iCT+ contactor, 1P, 20 A rated operational current, 3.6 kW at 250 V AC. Current lifecycle status. DIN-rail mount. For control circuits in resident","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"60 mm","Poles":"1P","Width":"18 mm","title":"A9C15030","Colour":"White","Height":"81 mm","Standards":"EN 60669-2-1","Noise level":"10 dB","description":"iCT plus 20A 1P Uc 230VAC","9 Mm Pitches":"2","Control type":"Remote control","Network type":"AC","Product name":"Acti9 iCT+","Maximum power":"3.6 kW at 250 V AC","Mounting mode":"Clip-on","Market segment":"Residential Small commercial","Tropicalisation":"2 conforming to IEC 60068-1","lifecycle_stage":"current","Local signalling":"Color indicator","Mounting support":"35 mm symmetrical DIN rail","Pollution degree":"3","Range Of Product":"Acti9","Device short name":"iCT+","Network frequency":"50 Hz","Relative humidity":"95 % at 55 °C","Tightening torque":"1 N.m","Compatibility code":"ICT+","Device application":"Control circuit","Operating altitude":"2000 m","inrush power in VA":"11 VA","Control signal type":"Maintained","Switching frequency":"6 switching operation/minute","Electrical durability":"5000000 cycles","Mechanical durability":"5000000 cycles","Wire stripping length":"10 mm","Connections - terminals":"Tunnel type terminal2 cable(s) 1.5 mm² rigid Tunnel type terminal2 cable(s) 1.5 mm² flexible with ferrule Tunnel type terminal2 cable(s) 2.5 mm² rigid Tunnel type terminal2 cable(s) 2.5 mm² flexible Tunnel type terminal1 cable(s) 4 mm² rigid Tunnel type terminal1 cable(s) 4 mm² flexible","IP degree of protection":"IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529","Pole contact composition":"1 NO","Product or component type":"Contactor","[Uc] control circuit voltage":"230 V AC 50 Hz","[Ui] rated insulation voltage":"300 V","[Ie] rated operational current":"20 A AC-7A 20 A AC-7B","[Ue] rated operational voltage":"250 V AC 50 Hz","Hold-in power consumption in VA":"1.1 VA","Ambient air temperature for storage":"-40...60 °C","Ambient air temperature for operation":"-5...55 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$85.57","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ea55a2bd2e977138405218bc36f62213.pdf","sourceUrl":"https://www.se.com/au/en/product/A9C15030/ict-plus-20a-1p-uc-230vac/"},"ai":{"faq":[{"question":"What are the key electrical ratings of the A9C15030?","answer":"Rated operational current is 20 A in AC-7A and AC-7B categories. Maximum switching power is 3.6 kW at 250 V AC. Control coil voltage is 230 V AC at 50 Hz."},{"question":"What is the physical size and mounting of the A9C15030?","answer":"Width 18 mm (1 modular pitch), height 81 mm, depth 60 mm. It clips onto a 35 mm symmetrical DIN rail — standard for distribution boards."},{"question":"What standards and approvals does the A9C15030 comply with?","answer":"Complies with EN 60669-2-1 (switches for household and similar fixed electrical installations). IP20 body, IP40 in modular enclosure per IEC 60529. Pollution degree 3 per IEC 60664-1."},{"question":"What is the closest alternative to the A9C15030 in the Acti9 range?","answer":"Within the Acti9 iCT+ family, the A9C15030 is the 1-pole, 20 A variant. Other pole counts or current ratings (e.g., 2-pole or 40 A) exist but change the form factor and rating — not a pin-compatible drop-in. For a direct replacement, stick to the same order code."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/A9C15030","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/A9C15030 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}