{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"A9C15180","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"A9C15180","canonicalUrl":"https://aoctrl.com/schneider/A9C15180","factsUrl":"https://aoctrl.com/api/mcp/products/A9C15180","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Acti9 CT contactor, A9C15180, 2P, 25 A AC-7A, 230 V AC 50 Hz coil, clip-on 35 mm DIN rail.","salesMarkdown":"It clips onto a 35 mm symmetrical DIN rail and is rated for 25 A in AC-7A utilisation category (resistive/lighting loads) and 8.5 A in AC-7B (motor loads for household appliances), per IEC 60947-4. The coil is 230 V AC at 50 Hz, drawing 15 VA inrush and 3.8 VA hold-in power. The 8.5 A AC-7B rating covers small motor loads like fans or pumps in appliances. The 230 V AC coil means it's a line-voltage control device; plan for a separate control transformer if your panel runs 24 VDC logic. The 2 NO pole configuration gives you two independently switched power paths, each rated at the same operational current. Mounting is clip-on to standard 35 mm DIN rail. IP20 body protection means it's safe from finger contact but not washdown; install inside an enclosure rated at least IP40. The tunnel-type terminals accept up to 6 mm² rigid or 2.5 mm² flexible per pole, with a tightening torque of 0.8 N.m. Strip length is 10 mm. The contactor is designed to IEC 61095 and EN 61095, the standard for electromechanical contactors for household and similar purposes. It carries a pollution degree 2 rating and is tropicalised to 2 levels per EN 61095 and IEC 1095, meaning it withstands damp heat conditions. Operating altitude is rated to 2000 m, and relative humidity tolerance is 95% at 55 °C. The noise level is listed at 30 dB — essentially silent operation in a panel environment.","metaTitle":"Schneider Electric A9C15180 Acti9 CT Contactor, 25 A, 2P, 23","metaDescription":"Schneider Electric A9C15180 Acti9 CT contactor, 2P, 25 A rated operational current, 230 VAC 50 Hz coil. Active production, IEC 61095. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"66 mm","Poles":"2P","Width":"18 mm","Colour":"White","Height":"90 mm","Standards":"IEC 61095 EN 61095","Noise level":"30 dB","9 Mm Pitches":"2","Control type":"Remote control","Network type":"AC","Product name":"Acti9 CT","Maximum power":"3 W at 250 V AC","Mounting mode":"Clip-on","Tropicalisation":"2 conforming to EN 61095 2 conforming to IEC 1095","lifecycle_stage":"current","Local signalling":"Color indicator","Mounting support":"35 mm symmetrical DIN rail","Pollution degree":"2","Range Of Product":"Acti9","Device short name":"CT","Network frequency":"50/60 Hz","Relative humidity":"95 % at 55 °C","Tightening torque":"0.8 N.m","Compatibility code":"CT","Device application":"Control circuit","Operating altitude":"2000 m","inrush power in VA":"15 VA","Control signal type":"Maintained","Switching frequency":"100 switching operations/day","Utilisation category":"AC-1 conforming to IEC 60947-4","Wire stripping length":"10 mm","Connections - terminals":"Power circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Power circuit: tunnel type terminals1 cable(s) 6 mm² rigid Control circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid","IP degree of protection":"IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529","Pole contact composition":"2 NO","Product or component type":"Contactor","[Uc] control circuit voltage":"230 V AC 50 Hz","[Ui] rated insulation voltage":"500 V AC","[Ie] rated operational current":"25 A AC-7A 8.5 A AC-7B","[Ue] rated operational voltage":"250 V AC 50 Hz","Hold-in power consumption in VA":"3.8 VA","Ambient air temperature for storage":"-40...60 °C","Ambient air temperature for operation":"-5...60 °C","[Uimp] rated impulse withstand voltage":"2.5 kV"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ae/en/product/A9C15180/contactor-25a-2p-uc-230v-ue-230vac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/A9C15180/alternatives.json"},"ai":{"faq":[{"question":"What are the key electrical ratings for the A9C15180?","answer":"Rated operational current is 25 A in AC-7A (resistive/lighting) and 8.5 A in AC-7B (motor), per IEC 60947-4. Control voltage is 230 V AC 50 Hz. Rated insulation voltage is 500 V AC. Rated operational voltage is 250 V AC 50 Hz."},{"question":"What is the physical size and mounting of the A9C15180?","answer":"Dimensions are 90 mm height, 18 mm width, 66 mm depth. It mounts via clip-on to 35 mm symmetrical DIN rail. The body is IP20 rated; for panel use, the enclosure should be at least IP40."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/A9C15180","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/A9C15180 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}