{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"A9C15183","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"A9C15183","canonicalUrl":"https://aoctrl.com/schneider/A9C15183","factsUrl":"https://aoctrl.com/api/mcp/products/A9C15183","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Acti9 CT contactor, A9C15183, 2P, 25 A AC-7A rated operational current, 230 V AC 50 Hz control voltage, clip-on DIN rail mount, IP20.","salesMarkdown":"## Acti9 CT Contactor – A9C15183 It clips onto a 35 mm symmetrical DIN rail and occupies 2 x 9 mm pitches (18 mm wide), so it fits neatly into a compact modular enclosure alongside other Acti9 devices. Rated operational current is 25 A in AC-7A category and 8.5 A in AC-7B — the AC-7A figure governs resistive loads like lighting or heating, while AC-7B covers inductive loads typical of small motors. Control voltage is 230 V AC at 50 Hz, with an inrush of 15 VA and a hold-in draw of 3.8 VA. For motor loads, the AC-7B rating of 8.5 A is the figure to use — that's the inductive switching capacity. The 230 V AC control coil is standard for European panel builds, and the 50/60 Hz tolerance means it works on both common mains frequencies. Pollution degree 2 is the typical industrial environment where only non-conductive pollution occurs, with occasional condensation. The 18 mm width (2 x 9 mm pitches) matches the Acti9 modular system, so it aligns with MCBs, RCDs, and other Acti9 devices on the same rail. Power circuit terminals are tunnel type: accept up to 2 x 2.5 mm² flexible or 1 x 6 mm² rigid. Control circuit terminals take 2 x 2.5 mm² flexible or 2 x 1.5 mm² rigid. Wire stripping length is 10 mm, tightening torque 0.8 N·m. The 2 NO pole contact composition gives two normally-open main contacts.","metaTitle":"A9C15183 Acti9 CT Contactor, 2P, 25 A, 230 V AC","metaDescription":"Schneider Electric A9C15183 Acti9 CT contactor, 2 poles, 25 A AC-7A rated operational current, 230 V AC control voltage. Current production. Clip-on DIN rail mount. IEC/EN 61095.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"66 mm","Poles":"2P","Width":"18 mm","Colour":"White","Height":"90 mm","Standards":"IEC 61095 EN 61095","Noise level":"30 dB","9 Mm Pitches":"2","Control type":"Remote and manual control","Network type":"AC","Product name":"Acti9 CT","Maximum power":"3 W at 250 V AC","Mounting mode":"Clip-on","Tropicalisation":"2 conforming to EN 61095 2 conforming to IEC 1095","lifecycle_stage":"current","Local signalling":"Color indicator","Mounting support":"35 mm symmetrical DIN rail","Pollution degree":"2","Range Of Product":"Acti9","Device short name":"CT","Network frequency":"50/60 Hz","Relative humidity":"95 % at 55 °C","Tightening torque":"0.8 N.m","Compatibility code":"CT","Device application":"Control circuit","Inrush power in VA":"15 VA","Operating altitude":"2000 m","Control signal type":"Maintained","Switching frequency":"100 switching operations/day","Utilisation category":"AC-1 conforming to IEC 60947-4","Wire stripping length":"10 mm","Connections - terminals":"Power circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Power circuit: tunnel type terminals1 cable(s) 6 mm² rigid Control circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid","IP degree of protection":"IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529","Pole contact composition":"2 NO","Product or component type":"Contactor","[Uc] control circuit voltage":"230 V AC 50 Hz","[Ui] rated insulation voltage":"500 V AC","[Ie] rated operational current":"25 A AC-7A 8.5 A AC-7B","[Ue] rated operational voltage":"250 V AC 50 Hz","Hold-in power consumption in VA":"3.8 VA","Ambient air temperature for storage":"-40...60 °C","Ambient air temperature for operation":"-5...60 °C","[Uimp] rated impulse withstand voltage":"2.5 kV"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/in/en/product/A9C15183/contactor-with-manual-control-ctc40-2-no-25-a-230-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/A9C15183/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for the A9C15183?","answer":"Rated operational current is 25 A in AC-7A (resistive loads) and 8.5 A in AC-7B (inductive motor loads). Control voltage is 230 V AC at 50 Hz. Rated operational voltage is 250 V AC. Maximum power is 3 W at 250 V AC."},{"question":"What standards does the A9C15183 comply with?","answer":"It complies with IEC 61095 and EN 61095 for electromechanical contactors for household and similar purposes. Utilisation category AC-1 per IEC 60947-4 is also listed."},{"question":"What is the physical size and mounting of the A9C15183?","answer":"Dimensions are 90 mm height, 18 mm width (2 x 9 mm pitches), 66 mm depth. It clips onto a 35 mm symmetrical DIN rail. IP20 rated on the body, IP40 inside a modular enclosure."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/A9C15183","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/A9C15183 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}