{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"A9C15185","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"A9C15185","canonicalUrl":"https://aoctrl.com/schneider/A9C15185","factsUrl":"https://aoctrl.com/api/mcp/products/A9C15185","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Acti9 CT contactor, A9C15185, 2P, 25 A AC-7A, 230 V AC 50 Hz coil, clip-on 35 mm DIN rail, IP20.","salesMarkdown":"Rated operational current is 25 A in AC-7A category (resistive loads like heating) and 8.5 A in AC-7B (lightly inductive loads such as small motors). The coil pulls 230 V AC at 50 Hz, with inrush of 15 VA and hold-in consumption of 3.8 VA — a steady 3 W at 250 V AC once sealed. Switching frequency is rated at 100 operations per day, which suits periodic on/off control rather than high-cycle PWM. The 18 mm width matches a standard modular device footprint, so it slots into a row of MCBs or RCBOs without wasting panel space. Terminals are tunnel type: power circuit accepts up to 6 mm² rigid or 2 x 2.5 mm² flexible; control circuit accepts 2 x 2.5 mm² flexible or 2 x 1.5 mm² rigid. Strip length is 10 mm; tighten to 0.8 N·m. IP20 on the body (finger-safe) and IP40 in a modular enclosure — fine for dry indoor panels. Pollution degree 2 (non-conductive dust only).","metaTitle":"Schneider Electric A9C15185 Acti9 CT Contactor, 2P, 25 A, 23","metaDescription":"Schneider Electric A9C15185 Acti9 CT contactor, 2P, 25 A AC-7A, 230 V AC coil, clip-on 35 mm DIN rail, IP20, IEC 61095. Current production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"66 mm","Poles":"2P","Width":"18 mm","Colour":"White","Height":"90 mm","Standards":"IEC 61095 EN 61095","Noise level":"30 dB","9 Mm Pitches":"2","Control type":"Remote control","Network type":"AC","Product name":"Acti9 CT","Maximum power":"3 W at 250 V AC","Mounting mode":"Clip-on","Tropicalisation":"2 conforming to CEI 61095 2 conforming to EN 61095","lifecycle_stage":"current","Local signalling":"Color indicator","Mounting support":"35 mm symmetrical DIN rail","Pollution degree":"2","Range Of Product":"Acti9","Device short name":"CT","Network frequency":"50/60 Hz","Relative humidity":"95 % at 55 °C","Tightening torque":"0.8 N.m","Compatibility code":"CT","Device application":"Control circuit","Inrush power in VA":"15 VA","Operating altitude":"2000 m","Control signal type":"Maintained","Switching frequency":"100 switching operations/day","Utilisation category":"AC-1 conforming to IEC 60947-4","Wire stripping length":"10 mm","Connections - terminals":"Power circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Power circuit: tunnel type terminals1 cable(s) 6 mm² rigid Control circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid","IP degree of protection":"IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529","Pole contact composition":"2 NO","Product or component type":"Contactor","[Uc] control circuit voltage":"230 V AC 50 Hz","[Ui] rated insulation voltage":"500 V AC","[Ie] rated operational current":"25 A AC-7A 8.5 A AC-7B","[Ue] rated operational voltage":"250 V AC 50 Hz","Hold-in power consumption in VA":"3.8 VA","Ambient air temperature for storage":"-40...60 °C","Ambient air temperature for operation":"-5...60 °C","[Uimp] rated impulse withstand voltage":"2.5 kV"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ng/en/product/A9C15185/contactor-ct-2-no-25-a-230-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/A9C15185/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"Rated operational current is 25 A AC-7A (resistive) and 8.5 A AC-7B (lightly inductive). Coil is 230 V AC 50 Hz, 15 VA inrush, 3.8 VA hold-in. Rated insulation voltage 500 V AC, operational voltage 250 V AC. Switching frequency 100 operations per day."},{"question":"What compliance standards does the A9C15185 meet?","answer":"It conforms to IEC 61095 and EN 61095 for contactors, and IEC 60947-4 for utilisation category AC-1. IP20 per IEC 60529, IP40 in modular enclosure."},{"question":"How does the A9C15185 mount and what space does it need?","answer":"Clip-on to 35 mm symmetrical DIN rail. Width is 18 mm (2 x 9 mm pitches), height 90 mm, depth 66 mm. Power terminals accept up to 6 mm² rigid; control terminals up to 2.5 mm² flexible."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/A9C15185","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/A9C15185 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}