{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"A9C15506","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"A9C15506","canonicalUrl":"https://aoctrl.com/schneider/A9C15506","factsUrl":"https://aoctrl.com/api/mcp/products/A9C15506","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Acti9 TL impulse relay, A9C15506, 1P, 16 A rated, 230 V AC 50 Hz control, DIN rail mount.","salesMarkdown":"The Schneider Electric A9C15506 is an Acti9 TL impulse relay — a 1-pole, 16 A rated device for switching lighting and resistive loads on 230 V AC 50 Hz networks. It's a latching relay: a 50 ms impulse on the control circuit toggles the NO contact, and it holds that state without coil power draw. The 19 VA hold-in consumption is only during the impulse, not continuous. Rated for AC-22 duty at 200,000 cycles, this covers mixed resistive and inductive loads up to 16 A — typical for contactor-driven lighting banks, fan coils, and general building automation switching. The 5 operations/minute switching frequency matches the pulse-repeat rate of push-button or PLC impulse control. Snaps onto standard DIN rail, occupying 18 mm width (one modular pitch). The 84 mm height and 60 mm depth fit flush in a distribution board or enclosure alongside Acti9 MCBs and RCCBs. IP20 on the opening, IP40 inside the enclosure — so it's panel-protected, not for wet locations. Terminals are tunnel type: power circuit accepts 1 or 2 cables up to 4 mm² rigid or 2.5 mm² flexible (with or without ferrule). Control circuit takes 1 cable up to 1.5 mm². Strip length is 9 mm; tighten to 1 N·m. The NO contact composition means one switched pole per unit — if you need multiple poles, stack units with a common control impulse. Certified to IEC 60669-2-2 and IEC 60669-1 (remote-control switching devices and general requirements). Pollution degree 3 suits industrial environments with conductive pollution. Tropicalisation class 2 means the relay is treated for humidity up to 95% at 55 °C — relevant for warm, damp panel installations. NF quality label indicates compliance with French standard NF C 61-314, often required for French-market building electrical installations.","metaTitle":"Schneider Electric A9C15506 Acti9 TL Impulse Relay, 16 A, 1P","metaDescription":"Schneider Electric A9C15506 Acti9 TL impulse relay, 16 A rated current, 1P, 230 V AC control, DIN rail mount, 200,000 cycles AC-22. Current production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"60 mm","Poles":"1P","Width":"18 mm","Height":"84 mm","Standards":"IEC 60669-2-2 IEC 60669-1","Noise level":"60 dB","9 Mm Pitches":"2","Control type":"Remote and manual control","Network type":"AC","Product name":"Acti9 TL","Mounting mode":"Fixed","Quality labels":"NF","Tropicalisation":"2","lifecycle_stage":"current","Impulse duration":"50 ms","Local signalling":"ON/OFF indication","Mounting support":"DIN rail","Pollution degree":"3","Range Of Product":"Acti9","Device short name":"TL","Network frequency":"50 Hz","Relative humidity":"95 % at 55 °C","Tightening torque":"1 N.m","Device application":"Standard","[In] rated current":"16 A","Control signal type":"Impulse","Remote control type":"Illuminated push-button 3 mA","Switching frequency":"5 switching operations/minute","Electrical durability":"AC-22: 200000 cycles","Wire stripping length":"9 mm","Connections - terminals":"Power circuit: tunnel type terminals 1 cable(s) 1...4 mm² rigid Power circuit: tunnel type terminals 2 cable(s) 1...2.5 mm² rigid Power circuit: tunnel type terminals 1 cable(s) 1...4 mm² flexible Power circuit: tunnel type terminals 2 cable(s) 1...2.5 mm² flexible Control circuit: tunnel type terminals 1 cable(s) 0.5...1.5 mm² rigid Control circuit: tunnel type terminals 1 cable(s) 0.5...1.5 mm² flexible Power circuit: tunnel type terminals 1 cable(s) 1...4 mm² flexible with ferrule Power circuit: tunnel type terminals 2 cable(s) 1...2.5 mm² flexible with ferrule Control circuit: tunnel type terminals 1 cable(s) 0.5...1.5 mm² flexible with ferrule","IP degree of protection":"IP20 conforming to IEC 60529 (on opening) IP40 conforming to IEC 60529 (in enclosure)","Pole contact composition":"1 NO","Product or component type":"Impulse relay","[Uc] control circuit voltage":"230 V AC 50 Hz","[Ui] rated insulation voltage":"500 V AC","[Ue] rated operational voltage":"250 V AC 50 Hz","Hold-in power consumption in VA":"19 VA","Ambient air temperature for storage":"-40...80 °C","Ambient air temperature for operation":"-20...50 °C","[Uimp] rated impulse withstand voltage":"2.5 kV","Comb busbar and distribution block compatibility":"Upside: ProDis"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/id/en/product/A9C15506/impulse-relay-tl-1p-1no-16a-coil-230-vac-50hz/","alternativesUrl":"https://aoctrl.com/api/mcp/products/A9C15506/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for the A9C15506?","answer":"16 A rated current (In), 1 pole NO contact, 230 V AC 50 Hz control voltage, 250 V AC 50 Hz operational voltage. Electrical durability is 200,000 cycles at AC-22 duty. Switching frequency is 5 operations per minute."},{"question":"What compliance documentation does Schneider provide for the A9C15506?","answer":"The relay is certified to IEC 60669-2-2 and IEC 60669-1, carries the NF quality label (NF C 61-314), and is rated for pollution degree 3 and tropicalisation class 2. IP20 on the opening, IP40 in enclosure per IEC 60529."},{"question":"How is the A9C15506 mounted and wired?","answer":"DIN rail mount, 18 mm width (1 module). Power terminals accept 1–4 mm² rigid or 1–2.5 mm² flexible (1 or 2 cables). Control terminals accept 0.5–1.5 mm². Strip 9 mm, torque to 1 N·m."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/A9C15506","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/A9C15506 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}