{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"A9L1C600","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"A9L1C600","canonicalUrl":"https://aoctrl.com/schneider/A9L1C600","factsUrl":"https://aoctrl.com/api/mcp/products/A9L1C600","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Acti9 iPRD1 C25r Type 1+2 surge arrester cartridge, 25 kA nominal discharge, <1.5 kV protection level, 73.5 mm depth, 18 mm width, white (RAL 9003).","salesMarkdown":"## Type 1+2 SPD Cartridge for Acti9 iPRD1 Base The Schneider Electric A9L1C600 is a Type 1+2 surge arrester cartridge (GDT technology) for the Acti9 iPRD1 C25r 3P+N base unit, covering L-N protection mode without an integrated fuse. It handles a nominal discharge current (In) of 25 kA per differential mode (L/N) and a maximum discharge current (Imax) of 65 kA, with an impulse current (Iimp) of 25 kA (12.5 A·s) — meaning it can absorb direct lightning strikes (Type 1) and also clamp switching surges (Type 2) in a single 18 mm-wide cartridge. The protection level (Up) stays under 1.5 kV differential mode, which keeps downstream equipment within typical impulse-withstand margins for 240 V AC circuits. The 25 kA In and 50 kA short-circuit withstand (Iff 50 kA follow current) tell you this cartridge is sized for main distribution panels where the prospective fault current is high — not a sub-panel with a 10 kA SCCR rating. The TOV withstand of 442 V L/N for 120 minutes means it survives temporary overvoltages on a weak neutral without failing short, which is critical on TT or TN-S earthing systems (explicitly listed as compatible). Response time under 100 ns is fast enough to clip a surge before it propagates past the SPD into sensitive electronics. The cartridge is certified to IEC 61643-11:2011 and EN 61643-11:2012 / 2018/A11, with VDE quality label. Operating altitude is 0–2000 m, ambient storage temperature -40 to 85 °C, relative humidity 5–95 %. The IP20 rating means it is finger-safe once installed inside an enclosure — not for outdoor exposed mounting.","metaTitle":"Schneider Electric A9L1C600 iPRD1 C25r Type 1+2 SPD Cartridg","metaDescription":"Schneider Electric A9L1C600 iPRD1 C25r Type 1+2 surge arrester cartridge, 25 kA In, <1.5 kV Up, 73.5 mm depth. Active lifecycle. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Fuses & Fuse Holders"],"specifications":{"Depth":"73.5 mm","Width":"18 mm","title":"A9L1C600","Colour":"White (RAL 9003)","Height":"45 mm","Material":"Thermoplastic","Standards":"IEC 61643-11:2011 EN 61643-11:2012 EN 61643-11:2018/A11","description":"Cartridge, Acti9 iPRD1 C25r, for surge arrester iPRD1 C25r 3P+N, type 1+2, L-N protection mode, without fuse","9 Mm Pitches":"2","Mounting mode":"Plug-in","Response time":"< 100 ns","Quality labels":"VDE","Earthing system":"TT TN-S TN-C","lifecycle_stage":"current","Local signalling":"Operating state: flag (green) Fault indication: flag (red)","Mounting support":"Into SPD module","Range Of Product":"Acti9","Device short name":"iPRD1 C25r","Relative humidity":"5...95 %","Operating altitude":"0...2000 m","Product destination":"Surge protection device iPRD1 C25r 3P + N","Surge arrester type":"Electrical distribution network","[Ifi] follow current":"50 kA","[Iimp] impulse current":"Differential mode: 25 kA L/N 12.5 A.s","IP degree of protection":"IP20","Short-circuit withstand":"50 kA","Maximum discharge current":"Differential mode: 65 kA L/N","Nominal discharge current":"Differential mode: 25 kA (L/N)","Product or component type":"Cartridge","Surge arrester class type":"Type 1 + 2","Surge arrester technology":"GDT","[Ut] temporary overvoltage":"442 V L/N 120 min withstand","[Ue] rated operational voltage":"240 V AC 50/60 Hz","Ambient air temperature for storage":"-40...85 °C","Maximum [Up] voltage protection level":"Differential mode <1.5 kV L/N","[Uc] maximum continuous operating voltage":"Differential mode: 275 V L/N"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/A9L1C600/cartridge-acti9-iprd1-c25r-for-surge-arrester-iprd1-c25r-3p+n-type-1+2-ln-protection-mode-without-fuse/"},"ai":{"faq":[{"question":"Where can I buy A9L1C600 and how do I get a price?","answer":"The A9L1C600 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm price and lead-time estimate."},{"question":"What is A9L1C600's listed depth and width?","answer":"The A9L1C600 has a depth of 73.5 mm and a width of 18 mm (2 x 9 mm pitches), with a height of 45 mm."},{"question":"What compliance documentation does this brand provide for A9L1C600?","answer":"The A9L1C600 is certified to IEC 61643-11:2011, EN 61643-11:2012, and EN 61643-11:2018/A11, with a VDE quality label. It is designed for TT, TN-S, and TN-C earthing systems."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/A9L1C600","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/A9L1C600 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}