{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"A9S70663","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"A9S70663","canonicalUrl":"https://aoctrl.com/schneider/A9S70663","factsUrl":"https://aoctrl.com/api/mcp/products/A9S70663","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Acti9 iSW-NA, switch-disconnector, 1P + N, 63 A at 230/240 V AC, AC-22A, DIN rail mount, IP20.","salesMarkdown":"## Switch-disconnector for control and isolation The Schneider Electric A9S70663 is an Acti9 iSW-NA switch-disconnector, 1P + N poles, rated 63 A at 230/240 V AC 50/60 Hz. It is designed for control and isolation applications, confirmed by its AC-22A utilisation category per EN/IEC 60947-3, meaning it handles switching of mixed resistive and inductive loads including moderate motor loads. The part is certified for isolation suitability per the same standard, giving a visible break and positive contact indication. Rated operational current of 63 A at 230/240 V AC defines the continuous load it can carry in normal service. The AC-22A rating confirms it can switch mixed loads up to that current — not just resistive heating, but also moderate motor and transformer inrush. Rated short-time withstand current (Icw) is 1.26 kA for 1 second, and short-circuit making capacity (Icm) is 5 kA when used alone — this tells you the switch can close onto a fault up to 5 kA without welding contacts, and can withstand a through-fault of 1.26 kA for one second while upstream protection clears it. Impulse withstand voltage (Uimp) of 6 kV gives confidence in surge environments typical of industrial panels. Tunnel-type terminals accept 1 to 35 mm² rigid or 1 to 25 mm² flexible with or without ferrules; strip length 14 mm, tightening torque 3.5 N·m. Compatible with comb busbars top or bottom for daisy-chaining multiple devices in a distribution board. IP20 finger-safe protection, suitable for enclosed panel use.","metaTitle":"Schneider Electric A9S70663 Acti9 iSW-NA Switch-Disconnector","metaDescription":"Schneider Electric A9S70663 Acti9 iSW-NA switch-disconnector, 1P+N, 63A at 230/240V AC. AC-22A rated, EN/IEC 60947-3. DIN rail mount, IP20. Current lifecycle stage, available to or","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["1-Pole MCB (DIN Rail)"],"specifications":{"Depth":"74 mm","Range":"Acti9","Width":"36 mm","Colour":"White","Height":"85 mm","Standards":"EN 60947-3 IEC 60947-3","9 Mm Pitches":"4","Control type":"Remote tripping Toggle","Product name":"Acti9 iSW-NA","Mounting mode":"Clip-on","Tropicalisation":"2","lifecycle_stage":"current","Local signalling":"ON/OFF indication","Mounting support":"DIN rail","Neutral position":"Left","Pollution degree":"3 conforming to IEC 60947-3","Device short name":"iSW-NA","Poles description":"1P + N","Relative humidity":"95 % at 55 °C","Tightening Torque":"3.5 N.m","Device application":"Control Isolation","Utilisation category":"AC-22A conforming to EN/IEC 60947-3","Electrical durability":"15000 cycles","Mechanical durability":"20000 cycles","Wire stripping length":"14 mm","Connections - terminals":"Tunnel type terminals (top or bottom) 1 cable(s) 1...25 mm² flexible with cable end Tunnel type terminals (top or bottom) 1 cable(s) 1...25 mm² flexible without cable end Tunnel type terminals (top or bottom) 1 cable(s) 1...35 mm² rigid without cable end","IP degree of protection":"IP20","Product or component type":"Switch disconnector","Suitability for isolation":"Yes conforming to EN/IEC 60947-3","Contact position indicator":"Yes","[Ui] rated insulation voltage":"500 V AC 50/60 Hz conforming to EN/IEC 60947-3","[Ie] rated operational current":"63 A at 230/240 V AC 50/60 Hz","[Ue] rated operational voltage":"230/240 V AC 50/60 Hz","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"-35...70 °C","[Uimp] rated impulse withstand voltage":"6 kV conforming to EN/IEC 60947-3","[Icw] rated short-time withstand current":"1.26 kA during 1 s","[Icm] rated short-circuit making capacity":"5 kA switch-disconnector alone","Comb busbar and distribution block compatibility":"Top or bottom: YES"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a928381f49c0bb5d958348386314065e.pdf","sourceUrl":"https://www.se.com/sg/en/product/A9S70663/switchdisconnector-iswna-1p-+-n-63-a/","alternativesUrl":"https://aoctrl.com/api/mcp/products/A9S70663/alternatives.json"},"ai":{"faq":[{"question":"What is the A9S70663 used for?","answer":"It is a switch-disconnector for control and isolation of 1P+N circuits up to 63 A at 230/240 V AC, suitable for mixed resistive and inductive loads (AC-22A)."},{"question":"What standards does the A9S70663 comply with?","answer":"It complies with EN 60947-3 and IEC 60947-3, including isolation suitability, pollution degree 3, and impulse withstand voltage of 6 kV."},{"question":"How do I get pricing and availability for the A9S70663?","answer":"Submit an RFQ through this listing. The part is sourced to order through independent distribution; current pricing and lead time are confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/A9S70663","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/A9S70663 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}