{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ACS800-DEMAG-01-0009-3+E200+0J400+N672+R720","brand":"ABB","brandSlug":"abb","productSlug":"ACS800-DEMAG-01-0009-3~3E200~30J400~3N672~3R720","canonicalUrl":"https://aoctrl.com/abb/ACS800-DEMAG-01-0009-3~3E200~30J400~3N672~3R720","factsUrl":"https://aoctrl.com/api/mcp/products/ACS800-DEMAG-01-0009-3%2BE200%2B0J400%2BN672%2BR720","rawCanonicalId":null},"summary":{"shortDescription":"ABB ACS800-DEMAG-01-0009-3+E200+0J400+N672+R720 configured ACS800-DEMAG series drive, 8.28 kgs, option-coded +E200+0J400+N672+R720 for legacy hoisting and motion panels.","salesMarkdown":"## What the order code actually is The ABB ACS800-DEMAG-01-0009-3+E200+0J400+N672+R720 is a configured ACS800-DEMAG series drive built off the standard ACS800 platform. It carries four factory option codes — E200, 0J400, N672, R720 — that are part of the identity and not field-installable alternatives, and it sits in the Motor Drives line under Motors & Motor Controls. On the bench, the unit weighs 8.28 kgs. That is a single-person lift for a service tech and worth knowing for the panel layout, but it is not the parameter that decides fit for a Demag hoist or crane retrofit — the option string and the firmware revision are what make this drive a match for a specific existing cabinet. ## Where the ACS800-DEMAG fits in a panel ACS800-DEMAG variants were specified into Demag crane and hoist control panels as a matched drive-and-controller solution, so a replacement order needs the full suffix string — E200, 0J400, N672, R720 — carried over from the nameplate of the unit being swapped. Dropping any of those codes changes the I/O map, the brake-control timing, or the fieldbus profile the Demag application macro expects. For a panel builder pulling a spare, the right move is to confirm the application macro and firmware version match the drive being replaced, not just the frame size. A near-identical ACS800 with a different option tail will power up on the same motor but will not behave the same at the brake-release or speed-reference stages, and that is the failure mode that gets flagged back to purchasing. ## Sourcing the exact configured string Because the full order code ACS800-DEMAG-01-0009-3+E200+0J400+N672+R720 is the identity, the RFQ has to carry all four plus-codes on the line. Specifying it that way into the BOM keeps the replacement qualified against the Demag application it was originally built for. For a packaging or materials-handling OEM running this drive on a bill of materials, the prudent sourcing stance is to quote the configured string to order through the independent channel rather than substitute on frame size alone, because an option mismatch surfaces as a commissioning failure on the hoist or travel axis, not as a simple no-start. The 8.28 kgs figure is a handling fact for the MRO shelf, not a reason to pick a different frame.","metaTitle":"ABB ACS800-DEMAG-01-0009-3+E200+0J400+N672+R720 drive","metaDescription":"ABB ACS800-DEMAG-01-0009-3+E200+0J400+N672+R720 configured drive, 8.28 kgs, sourced to order against an RFQ for legacy ACS800-DEMAG builds.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["AC Drives (VFD)"],"specifications":{"Part #":"ACS800-DEMAG-01-0009-3+E200+0J400+N672+R720","Weight":"8.28 kgs","Category":"Drives","Sub Category":"Motor Drives","Top Category":"Motors & Motor Controls","lifecycle_stage":"eol_hot"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,432.77","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ACS800-DEMAG-01-0009-3%2BE200%2B0J400%2BN672%2BR720/alternatives.json"},"ai":{"faq":[{"question":"What is the full part number being sourced?","answer":"The order code is ACS800-DEMAG-01-0009-3+E200+0J400+N672+R720, configured off the ABB ACS800-DEMAG platform with four factory option codes — E200, 0J400, N672, R720 — that are part of the identity and travel with the part."},{"question":"What does the drive weigh?","answer":"The ACS800-DEMAG-01-0009-3+E200+0J400+N672+R720 is listed at 8.28 kgs, which is a single-person lift for a service tech and a factor in the panel layout."},{"question":"What is the closest functional second-source?","answer":"In the active ABB catalogue, the ACS880-01-021A-5 at 7.71 kgs is the same wall-mount drive class one generation forward and the candidate a second-source gate would weigh, though it is a different platform and a direct cabinet swap means re-validating the application macro and I/O wiring against the existing Demag panel."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/abb/ACS800-DEMAG-01-0009-3~3E200~30J400~3N672~3R720","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/abb/ACS800-DEMAG-01-0009-3~3E200~30J400~3N672~3R720 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}