{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AJ65VBTCE2-8T","brand":"Mitsubishi Electric","brandSlug":"mitsubishi","productSlug":"AJ65VBTCE2-8T","canonicalUrl":"https://aoctrl.com/mitsubishi/AJ65VBTCE2-8T","factsUrl":"https://aoctrl.com/api/mcp/products/AJ65VBTCE2-8T","rawCanonicalId":null},"summary":{"shortDescription":"Mitsubishi AJ65VBTCE2-8T, CC-Link remote I/O station, 8 transistor outputs (sink type), rated load voltage DC 12/24 V, 0.1 A per point, 1 ms response time.","salesMarkdown":"## Integrator note — output loading and protection The AJ65VBTCE2-8T is a CC-Link remote I/O station with eight transistor sink outputs, each rated 0.1 A continuous and a common limit of 0.8 A shared across the eight points. The unit power supply accepts DC 20.4 to 26.4 V, while the load supply range spans DC 10.2 to 26.4 V — so a single 24 VDC bus can feed both if the rail stays within the tighter unit supply window. Outputs are photocoupler-isolated from the backplane, with a Zener diode surge suppressor across each channel. Response time is 1 ms or less for both ON and OFF transitions under resistive load, which suits valve banks or indicator lamp arrays that need consistent timing. The built-in overload, overvoltage, and overheat protection functions trip before the output transistor fails — good for a line that cannot tolerate a welded-on output. ## CC-Link integration and wiring This unit occupies one station on a CC-Link Ver.1.10 network. Communication uses the dedicated cable (FANC-110SBH or similar) with one-touch connectors sold separately. Unit power and I/O power connect via a separate one-touch connector; the output field wiring uses sensor connectors (e-CON, 2-wire type), commoned in groups of eight.","metaTitle":"Mitsubishi AJ65VBTCE2-8T CC-Link Remote I/O, 8 Transistor Ou","metaDescription":"Mitsubishi AJ65VBTCE2-8T CC-Link remote I/O station, 8 transistor sink outputs, 0.1 A per point, 1 ms response, overload protection. Mature lifecycle, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Digital Output Modules"],"specifications":{"Mass":"0.10 Kg","Current":"35 mA or less (24 VDC, all points ON)","Depth (D)":"43.5 mm","Width (W)":"40 mm","ON → OFF":"1 ms or less (resistance load)","Manufacturer":"Mitsubishi Electric","Station type":"Remote I / O station","Output format":"Transistor output (sink type)","Use elevation":"0 to 2000 m","Use atmosphere":"No corrosive gas","Shipping Weight":"1.2 Kg","lifecycle_stage":"mature","Pollution degree":"2 or less","Protection grade":"IP 1 XB","Surge suppressor":"Zener diode","Impact resistance":"Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)","Withstand voltage":"Between DC external terminal and ground: AC 500 V for 1 minute","Rated load voltage":"DC12 / 24V","Communication Cable":"Ver.1.10 compatible CC-Link dedicated cable: FANC-110SBH, FA-CBL 200PSBH, CS-110","Estimated Lead Time":"Usually ships in 1 - 10 working days.","Protection function":"Overload protection function, overvoltage protection function, overheat protection function","Maximum load current":"0.1 A / 1 point, 0.8 A / 1 common","Output common method":"8 points / common (Sensor connector (e - CON) type 2 wire type)","Installation location":"In the control panel","Insulation resistance":"DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 MΩ or more","Over voltage category":"II or less","Leakage current at OFF":"0.1 mA or less","Maximum inrush current":"0.7 A less than 10 ms","Number of output points":"8 points","Output isolation method":"Photocoupler isolation","Used load voltage range":"DC 10.2 to 26.4 V (ripple ratio within 5%)","Storage ambient humidity":"10 to 90% RH, non condensing","Unit power supply Voltage":"DC 20.4 to 26.4 V (ripple ratio within 5%)","Ambient operating humidity":"10 to 90% RH, non condensing","Number of occupied stations":"1 station","Storage ambient temperature":"-20 to 75 ° C","Operating ambient temperature":"0 to 55 ° C","External dimensions Height (H)":"100 mm","Maximum voltage drop during ON":"DC 0.1 V or less (TYP.) 0.1 A, DC 0.2 V or less (MAX.) 0.1 A","Output response time OFF → ON":"1ms or less","External wiring connection method":"Communication unit: One-touch connector for communication (sold separately) Unit power supply unit, I / O power supply unit: Power supply . FG one-touch connector (sold separately) Input / output unit: sensor connector (e-CON)","When there is continuous vibration":"Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2","Output section External power supply Voltage":"DC 10.2 to 26.4 V (ripple ratio within 5%)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$266.00","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/AJ65VBTCE2-8T/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum load current per output on the AJ65VBTCE2-8T?","answer":"Each transistor output is rated 0.1 A maximum, with a common limit of 0.8 A across all eight points."},{"question":"What protection features does the AJ65VBTCE2-8T include?","answer":"The unit has overload, overvoltage, and overheat protection functions, plus a Zener diode surge suppressor on the output."},{"question":"What is the response time of the outputs on this CC-Link station?","answer":"Both ON→OFF and OFF→ON transitions are 1 ms or less under resistive load."},{"question":"What is the supply voltage requirement for the AJ65VBTCE2-8T?","answer":"The unit power supply requires DC 20.4 to 26.4 V; the load voltage range is DC 10.2 to 26.4 V."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/mitsubishi/AJ65VBTCE2-8T","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/mitsubishi/AJ65VBTCE2-8T when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}