{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"AJ65VBTS3-16D","brand":"Mitsubishi Electric","brandSlug":"mitsubishi","productSlug":"AJ65VBTS3-16D","canonicalUrl":"https://aoctrl.com/mitsubishi/AJ65VBTS3-16D","factsUrl":"https://aoctrl.com/api/mcp/products/AJ65VBTS3-16D","rawCanonicalId":null},"summary":{"shortDescription":"Mitsubishi AJ65VBTS3-16D CC-Link remote I/O unit, 16-point DC input (plus common type), spring clamp terminal block, 24 VDC, 1.5 ms response, 0.24 kg.","salesMarkdown":"## 16-point DC input remote I/O for CC-Link The AJ65VBTS3-16D is a CC-Link small-type remote I/O station carrying 16 isolated DC inputs in a plus-common configuration. The spring-clamp terminal block (2-piece, trapezoid 3-wire type) is used. ## Input electrical limits and timing Rated input voltage is 24 VDC (ripple ≤5%), with an allowable range of 19.2–26.4 V. Each channel draws about 5 mA at 24 V. The ON threshold is 14 V or 3.5 mA; OFF is 6 V or 1.7 mA. That gives a clean switching window — don’t expect a 10 V trigger. Response time is 1.5 ms or less in both directions. Isolation is via photocoupler; withstand voltage is AC 500 V for 1 minute between external terminals and ground. Recorded lifecycle stage is mature. The part is not freshly introduced nor marked obsolete — this is the steady-state phase where supply is stable but you won’t find factory-first-run freshness on every unit. When sourcing, examine the date code and lot marking on the side label. The spring clamp terminal block is a common target for re-markers; check the moulded part number against the brand impression. ## Wiring and installation notes The communication connector and power/IO connectors are sold separately (one-touch connectors for communication and power supply, 2-piece spring clamp for I/O). The unit power supply draws 35 mA or less at 24 VDC with all 16 points ON — budget that into the 24 V loop. Up to 100% simultaneous input points allowed when front-mounted; check the derating curve for other orientations. This is a plus-common type: all 16 inputs share a common return, so wire the sensors accordingly.","metaTitle":"Mitsubishi AJ65VBTS3-16D CC-Link Remote I/O, 16-Point DC Inp","metaDescription":"CC-Link remote I/O station with 16 DC inputs, spring clamp terminals, 24 VDC, 1.5 ms response. Mature lifecycle. 0.24 kg. Available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLC I/O & Expansion Modules"],"specifications":{"Mass":"0.24 Kg","Current":"35 mA or less (24 VDC, all points ON)","Depth (D)":"51.5 mm","Width (W)":"137 mm","ON → OFF":"1.5 ms or less (24 VDC)","Input format":"DC input (plus common type)","Manufacturer":"Mitsubishi Electric","Station type":"Remote I / O station","Use elevation":"0 to 2000 m","Use atmosphere":"No corrosive gas","Shipping Weight":"1.2 Kg","lifecycle_stage":"mature","Input resistance":"About 4.7 kΩ","Pollution degree":"2 or less","Protection grade":"IP 1 XB","Impact resistance":"Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)","Input common type":"16 points 1 common (Spring clamp terminal trapezoid 3 wire type)","Withstand voltage":"Between DC external terminal and ground: AC 500 V for 1 minute","Communication Cable":"Ver.1.10 compatible CC-Link dedicated cable: FANC-110SBH, FA-CBL 200PSBH, CS-110","Estimated Lead Time":"Usually ships in 1 - 10 working days.","Rated input current":"About 5 mA","Rated input voltage":"DC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 26.4 V)","Installation location":"In the control panel","Insulation resistance":"DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 MΩ or more","Over voltage category":"II or less","Input isolation method":"Photocoupler isolation","Number of input points":"16 points","ON voltage / ON current":"14 V or more / 3.5 mA or more","Storage ambient humidity":"10 to 90% RH, non condensing","OFF voltage / OFF current":"6 V or less / 1.7 mA or less","Unit power supply Voltage":"DC 20.4 to 26.4 V (ripple ratio within 5%)","Ambient operating humidity":"10 to 90% RH, non condensing","Number of occupied stations":"1 station","Storage ambient temperature":"-20 to 75 ° C","Operating ambient temperature":"0 to 55 ° C","External dimensions Height (H)":"50 mm","Input response time OFF → ON":"1.5 ms or less (24 VDC)","External wiring connection method":"Communication unit: One-touch connector for communication (sold separately) Unit power supply unit, input / output power supply unit: Power supply . FG one-touch connector (sold separately) Input / output unit: 2 piece spring clamp terminal block","When there is continuous vibration":"Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2","Maximum number of simultaneous input points":"100% (when mounted on the front), see the derating chart except when front mounted"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$298.00 – $746.37","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/AJ65VBTS3-16D/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/mitsubishi/AJ65VBTS3-16D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/mitsubishi/AJ65VBTS3-16D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}