{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A10206363","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A10206363","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A10206363","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A10206363","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 ATV1200A10206363 medium-voltage AC drive, 752 kW, 2970-3630 V supply, 36-pulse diode rectifier, floor-standing enclosure, CE.","salesMarkdown":"## Medium-voltage drive for 752 kW motors The ATV1200A10206363 is a 752 kW medium-voltage AC drive in the Altivar 1200 family, designed for asynchronous and synchronous motors. Its supply voltage limits are 2970 to 3630 V, putting it squarely in the medium-voltage class for large pumps, compressors, conveyors, and fans in process plants. The 36-pulse diode rectifier input topology reduces line harmonics significantly compared to 6- or 12-pulse designs, often eliminating the need for external harmonic filters and meeting IEEE 519 without additional hardware. ## Physical footprint and site planning This drive ships in a floor-standing enclosure with separate air flows for power and control sections. Standard-efficiency configuration measures 3060 mm wide by 1400 mm deep by 2520 mm high; the high-efficiency variant adds width to 3660 mm and height to 2670 mm, with depth increasing to 1500 mm. Cooling air volume is 13,200 m³/h for standard efficiency and 19,800 m³/h for high efficiency — plan HVAC capacity and ducting accordingly. Noise level is 80 dB, so hearing protection zones and acoustic enclosures may be needed. Operating altitude up to 1000 m is full-rated; above that, derate 0.6 % per 100 m up to 2000 m. The drive must be mounted vertically within ±10 degrees. ## Overload capability and protection Standard overload rating delivers 1.2 × In for 60 seconds and 1.5 × In for 3 seconds. High overload mode provides 1.5 × In for 60 seconds and 1.85 × In for 3 seconds — useful for high-inertia loads or severe-duty applications. Ground fault protection is built into the drive. Prospective line short-circuit current withstand is 31.5 kA for 150 ms, and dielectric strength between earth and power terminals is 20 kV AC. Pollution degree 2 per EN/IEC 61800-5-1 and overvoltage category II apply. The drive meets EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1 standards. ## Control I/O and system composition Four software-configurable analogue inputs (0-20 mA / 4-20 mA, 24 V max, 250 Ω impedance) and one analogue output (same current range) handle process signals. Six discrete inputs are standard, expandable to ten with an option. The drive system comprises two plinths, a phase-shifting transformer, medium-voltage arrestors, cooling fans, a human-machine interface, and 18 power cells. Power connection uses M10 bar-type terminals accepting 6 × 40 mm² cable per phase, entry from top or bottom. Control supply is external at 220 V AC, 3 kVA. The internal cooling fan supply is 380 V AC. Optional external supplies for both control and fan are available. Electrical isolation between power and control circuits is standard. Sourced through authorized industrial distribution channels. CE marking covers European regulatory acceptance.","metaTitle":"Schneider ATV1200A10206363 AC Drive, 752 kW, 2970-3630 V","metaDescription":"Schneider Electric ATV1200A10206363 medium-voltage AC drive, 752 kW, 2970-3630 V supply, 36-pulse rectifier, CE marked. Active production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1400 mm (standard efficiency) 1500 mm (high efficiency)","Width":"3060 mm (standard efficiency) 3660 mm (high efficiency)","title":"ATV1200A10206363","Height":"2520 mm standard efficiency 2670 mm high efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"36 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 6.3 kV - 900 kVA","Line current":"100 A","Apparent power":"900 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"752 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 18 x power cells","Product destination":"Asynchronous motors Synchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"13200 m3/h (standard efficiency) 19800 m3/h (high efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP31 IP41 IP42","Network number of phases":"3 phases","Continuous output current":"82 A (standard overload) 66 A (high overload)","Maximum transient current":"99 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"6.3 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Closed-loop control with encoder Vector control with sensor, optional Voltage/frequency ratio (V/f) Sensorless flux vector control","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"30 kW (standard efficiency) 26 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV1200A10206363/medium-voltage-variable-speed-drive-atv1200-6-3-kv-900-kva/"},"ai":{"faq":[{"question":"What is the motor power rating of the ATV1200A10206363?","answer":"The drive is rated for 752 kW motor power, suitable for large asynchronous and synchronous motors in medium-voltage applications."},{"question":"What input voltage range does the ATV1200A10206363 require?","answer":"Supply voltage limits are 2970 to 3630 V AC. The input uses a 36-pulse diode rectifier bridge for low harmonic distortion."},{"question":"What compliance documentation does the ATV1200A10206363 carry?","answer":"CE marking is listed. The drive complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1 standards."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A10206363","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A10206363 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}