{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A10804242","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A10804242","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A10804242","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A10804242","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 AC drive, ATV1200A10804242, 903 kW motor power, 1080 kVA apparent power, 2970-3630 V supply, 24-pulse diode rectifier, floor-standing enclosure.","salesMarkdown":"## What this 903 kW drive delivers in a medium-voltage line The ATV1200A10804242 is a medium-voltage AC drive from the Altivar 1200 range, rated for 903 kW motor power and 1080 kVA apparent power, with a supply voltage window of 2970 to 3630 V. It uses a 24-pulse diode rectifier bridge on the input, which significantly reduces line-side harmonics compared to a 6- or 12-pulse design — relevant for installations where IEEE 519 compliance is a concern. The drive is assembled in a floor-standing enclosure with separate air flows for power and control sections, keeping heat away from sensitive electronics. ## Overload capability and duty cycle Standard overload rating: 1.2 × In for 60 seconds and 1.5 × In for 3 seconds. High overload rating: 1.5 × In for 60 seconds and 1.85 × In for 3 seconds. This means the drive can handle short-duration peak loads — a 1.85× overload for 3 seconds is useful for starting high-inertia loads like large fans or centrifuges without oversizing the drive. ## Physical footprint and cooling demands Dimensions vary by efficiency variant: standard efficiency is 2670 mm high, 3660 mm wide, and 1600 mm deep; high efficiency adds height to 2820 mm and width to 3960 mm, with depth at 1400 mm. Cooling air volume is substantial — 29,900 m³/h for standard efficiency, 33,200 m³/h for high efficiency — so the installation room must have adequate ventilation or ducting to handle the heat rejection. Forced convection cooling is standard; the internal fan supply is 380 V AC, with an optional external supply for the fan. ## Standards, isolation, and environmental limits The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Electrical isolation between power and control is standard. Pollution degree 2 per EN/IEC 61800-5-1, overvoltage category II. Dielectric strength tested at 20 kV AC between earth and power terminals. Operating altitude up to 1000 m without derating; above that, derate current by 0.6% per additional 100 m. Vibration resistance is 4.9 m/s² from 10 to 50 Hz.","metaTitle":"Schneider Electric ATV1200A10804242 AC Drive, 903 kW","metaDescription":"Schneider Electric ATV1200A10804242 Altivar 1200 AC drive, 903 kW motor power, 1080 kVA apparent power, 2970-3630 V supply. CE marked, current lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1600 mm (high efficiency) 1400 mm (high efficiency)","Width":"3660 mm (high efficiency) 3960 mm (high efficiency)","title":"ATV1200A10804242","Height":"2670 mm standard efficiency 2820 mm high efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"24 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 4.16 kV - 1080 kVA","Line current":"150 A","Apparent power":"1080 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"903 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 12 x power cells","Product destination":"Asynchronous motors Synchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"29900 m3/h (standard efficiency) 33200 m3/h (high efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP31 IP42 IP41","Network number of phases":"3 phases","Continuous output current":"150 A (standard overload) 120 A (high overload)","Maximum transient current":"180 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"4.16 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Voltage/frequency ratio (V/f) Closed-loop control with encoder","Asynchronous motor control profile":"Voltage/frequency ratio (V/f) Closed-loop control with encoder Sensorless flux vector control Vector control with sensor, optional","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"36 kW (standard efficiency) 32 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV1200A10804242/medium-voltage-variable-speed-drive-atv1200-4-16-kv-1080-kva/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A10804242","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A10804242 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}