{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A10905555","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A10905555","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A10905555","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A10905555","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 ATV1200A10905555 medium-voltage AC drive, 911 kW motor power, 2970-3630 V input, 30-pulse diode rectifier, floor-standing enclosure, CE marked.","salesMarkdown":"## Active production — no lifecycle risk for BOM planning The ATV1200A10905555: For a 911 kW medium-voltage drive that anchors a large motor installation, a lifecycle change would trigger significant requalification cost — the current status gives the procurement team a clean planning horizon. ## Medium-voltage input — not a standard 480 V drive This drive operates from a 2970...3630 V supply, placing it in the medium-voltage class. The 30-pulse diode rectifier front end delivers low line-current harmonics — typically below 5% THD without an active filter — which simplifies compliance with IEEE 519 at the point of common coupling. The 135 A line current at 1090 kVA apparent power reflects the medium-voltage, high-power nature. Prospective short-circuit withstand is 31.5 kA for 150 ms, so the upstream protection must coordinate with this fault-clearing capability. Dielectric strength between earth and power terminals is 20 kV AC, confirming the insulation coordination for a 3.3 kV class system. Overvoltage category II per EN/IEC 61800-5-1 applies. ## Floor-standing enclosure — site layout and cooling plan required The drive ships in a floor-standing enclosure with separate air flows for power and control sections. Standard efficiency dimensions are 3660 mm wide × 1400 mm deep × 2520 mm high; the high-efficiency variant adds width to 3960 mm and depth to 1600 mm, height to 2670 mm. Cooling is forced convection, moving 16500 m³/h (standard) or 19800 m³/h (high efficiency) of air. The drive room HVAC must handle this exhaust volume plus the 80 dB noise level from the cooling fans. Operating position is vertical ±10 degrees. Above 1000 m altitude, derate output current by 0.6% per 100 m. Relative humidity range is 0...90% (0...95% optional). ## Overload profiles and motor compatibility Two overload duty profiles are available: standard overload withstands 1.2× In for 60 s and 1.5× In for 3 s; high overload withstands 1.5× In for 60 s and 1.85× In for 3 s. The high-overload profile suits applications with frequent peak torque demands, such as crushers or mills. The drive supports both synchronous and asynchronous motors, with a speed range of 20...100%. Output voltage equals the supply voltage minus rectifier and inverter drops. Integrated EMC filter and electrical isolation between power and control simplify panel wiring and reduce conducted emissions back to the line. ## Control I/O and system composition The drive includes 4 software-configurable analog inputs (0...20 mA / 4...20 mA, 24 V max, 250 Ω impedance) and 1 analog output of the same type. Discrete inputs number 6 standard, expandable to 10 optional. Product composition includes 2 plinths, a phase-shifting transformer, medium-voltage arrestors, cooling fans, a human-machine interface, and 15 power cells. The M10 screw-type bar connection accepts up to 6 × 40 mm² cable per phase, entry from top or bottom. External control supply is 220 V AC at 3 kVA; internal cooling fan supply is 380 V AC. Optional external supplies for both are available.","metaTitle":"Schneider ATV1200A10905555 AC Drive, 911 kW, 2970-3630 V","metaDescription":"Schneider Electric ATV1200A10905555 medium-voltage AC drive, 911 kW motor power, 2970-3630 V input, 30-pulse rectifier. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1400 mm (standard efficiency) 1600 mm (high efficiency)","Width":"3960 mm (high efficiency) 3660 mm (standard efficiency)","title":"ATV1200A10905555","Height":"2520 mm standard efficiency 2670 mm high efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"30 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 5.5 kV - 1090 kVA","Line current":"135 A","Apparent power":"1090 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"911 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 15 x power cells","Product destination":"Synchronous motors Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"19800 m3/h (high efficiency) 16500 m3/h (standard efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP31 IP42 IP41","Network number of phases":"3 phases","Continuous output current":"114 A (standard overload) 91 A (high overload)","Maximum transient current":"137 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"5.5 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Voltage/frequency ratio (V/f) Closed-loop control with encoder","Asynchronous motor control profile":"Voltage/frequency ratio (V/f) Closed-loop control with encoder Vector control with sensor, optional Sensorless flux vector control","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"36 kW (standard efficiency) 32 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV1200A10905555/medium-voltage-variable-speed-drive-atv1200-5-5-kv-1090-kva/"},"ai":{"faq":[{"question":"What motor power and voltage does ATV1200A10905555 support?","answer":"The drive is rated for 911 kW motor power with a supply voltage range of 2970...3630 V. It drives both synchronous and asynchronous motors."},{"question":"What compliance standards does ATV1200A10905555 meet?","answer":"The drive is CE marked and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A10905555","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A10905555 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}