{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A11904242","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A11904242","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A11904242","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A11904242","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 series, ATV1200A11904242 AC Drive (VFD) 480V, 995 kW motor power, 1190 kVA apparent power, 24-pulse diode rectifier, floor-standing enclosure.","salesMarkdown":"## Medium-voltage drive for large motor loads The ATV1200A11904242 is a medium-voltage AC drive from the Altivar 1200 series, rated for 995 kW motor power with 1190 kVA apparent power. It accepts a 2970...3630 V supply via a 24-pulse diode rectifier bridge, which inherently cancels the 5th and 7th harmonics — a practical advantage for plants with strict IEEE 519 compliance targets or weak utility connections. The drive supports both synchronous and asynchronous motors, with overload capability of 1.2 In for 60 s (standard) or 1.5 In for 60 s (high overload). This matters for applications like large conveyors or mills that need breakaway torque without oversizing the drive frame. ## Physical footprint and site preparation This is a floor-standing enclosure, not a panel-mount unit. Standard-efficiency configuration measures 4060 mm wide × 1400 mm deep × 2670 mm high; the high-efficiency variant adds width to 4360 mm and depth to 1600 mm. Site planning must account for the 16500 m³/h (standard) or 19900 m³/h (high-efficiency) cooling airflow — forced convection with separate air paths for power and control sections. The enclosure colour is grey (RAL 7032). Electrical connection uses M10 screw-type bars accepting up to 6 × 40 mm² per phase, entry from top or bottom. Operating position is vertical within ±10 degrees. ## Power architecture and cell topology The ATV1200A11904242 uses a multi-cell topology: 12 power cells fed by a phase-shifting transformer with two plinths. Each cell is a modular inverter stage; the 24-pulse input rectifier keeps line current distortion low without external filters. The integrated EMC filter meets EN/IEC 61800-3 conducted emissions limits for the intended industrial environment. Prospective short-circuit current withstand is 31.5 kA for 150 ms — sufficient for most industrial distribution systems when properly coordinated upstream. ## Control interfaces and I/O complement The drive carries 4 software-configurable analogue inputs (0...20 mA / 4...20 mA, 24 V max, 250 Ohm impedance) and 2 analogue outputs of the same type. Discrete inputs number 6 standard, expandable to 10. The human-machine interface is included as standard equipment. Control supply requires 220 V AC at 3 kVA (external), with an optional 220 V AC/DC supply. The cooling fan runs on 380 V AC internal supply, also available as an external option. Electrical isolation between power and control circuits is standard. ## Environmental limits and derating Operating altitude range is 1000...2000 m with current derating of 0.6 % per 100 m above 1000 m. Relative humidity tolerance is 0...90 % standard, 0...95 % optional. Vibration resistance is 4.9 m/s² over 10...50 Hz. Noise level at full load is 80 dB — factor this into enclosure room acoustic planning. Speed range is 20:1 to 100:1, adequate for centrifugal loads (pumps, fans) and constant-torque applications (conveyors, extruders) within the motor's thermal capability at low speed. ## Lifecycle status and sourcing CE marking is standard. Standards compliance includes EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3 (EMC), EN/IEC 61800-4, and EN/IEC 61800-5-1 (safety). Ground fault protection is integrated at the drive level.","metaTitle":"Schneider Electric ATV1200A11904242 AC Drive, 995 kW","metaDescription":"Schneider Electric ATV1200A11904242 AC Drive (VFD) 480V. 995 kW motor power, 1190 kVA apparent power, 24-pulse input. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1400 mm (standard efficiency) 1600 mm (high efficiency)","Width":"4060 mm (standard efficiency) 4360 mm (high efficiency)","title":"ATV1200A11904242","Height":"2670 mm high efficiency 2670 mm standard efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"24 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 4.16 kV - 1190 kVA","Line current":"200 A","Apparent power":"1190 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"995 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 12 x power cells","Product destination":"Synchronous motors Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"16500 m3/h (standard efficiency) 19900 m3/h (high efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP41 IP31 IP42","Network number of phases":"3 phases","Continuous output current":"165 A (standard overload) 132 A (high overload)","Maximum transient current":"198 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"4.16 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Sensorless flux vector control Closed-loop control with encoder Voltage/frequency ratio (V/f) Vector control with sensor, optional","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"40 kW (standard efficiency) 35 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV1200A11904242/medium-voltage-variable-speed-drive-atv1200-4-16-kv-1190-kva/"},"ai":{"faq":[{"question":"How is the ATV1200A11904242 quoted for volume purchases?","answer":"This drive is quoted to order against the specific BOM quantity. No stock-holding claim is made; each quote reflects real-time supply conditions."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A11904242","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A11904242 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}