{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A11906363","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A11906363","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A11906363","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A11906363","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 ATV1200A11906363 medium voltage variable speed drive, 920 kW, 36-pulse diode rectifier input, 2970-3630 V supply, floor-standing enclosure.","salesMarkdown":"## 920 kW MV drive with 36-pulse input for harmonic mitigation The ATV1200A11906363 is a 920 kW medium voltage variable speed drive from the Altivar 1200 series, designed for synchronous and asynchronous motors in the 2.3 to 11 kV class. Its 36-pulse diode rectifier bridge input topology delivers line-side harmonic performance below IEEE 519-2014 limits without external filters — a key differentiator from 12- or 18-pulse drives that still require active filtering for THD compliance. The drive accepts a supply voltage range of 2970-3630 V and draws 100 A line current, with an apparent power rating of 1100 kVA. Output voltage tracks the supply voltage — no step-up transformer needed between the drive and a 3.3 kV motor. ## Multi-cell topology and overload profile Internally, the drive comprises 18 power cells fed by a phase-shifting transformer, with medium voltage arrestors, cooling fans, and an HMI. This cascaded H-bridge architecture means each cell sees a fraction of the total voltage — a single cell failure does not drop the drive entirely, though the output voltage is reduced. The overload withstand is 1.2× In for 60 seconds (standard duty) or 1.5× In for 60 seconds (high overload), with short-duration peaks of 1.85× In for 3 seconds. The floor-standing enclosure separates power and cooling airflows, with forced convection cooling moving 16500 m³/h (standard efficiency) or 19800 m³/h (high efficiency). Noise level is 80 dB — plan for hearing protection in the drive room. ## Physical footprint and efficiency variants The drive ships in two enclosure variants. The standard efficiency version measures 3360 mm wide × 1400 mm deep × 2520 mm high. The high efficiency version is wider (3660 mm) and deeper (1600 mm) at 2670 mm tall — the extra volume accommodates larger heat exchangers and increased airflow. Both require vertical installation within ±10 degrees and a minimum 1000 m operating altitude (derate 0.6% per 100 m above that, up to 2000 m). Power connections use M10 screw-type bar terminals accepting up to 6×40 mm² cable, entry from top or bottom. Control supply requires an external 220 V AC source at 3 kVA; the cooling fan runs on internal 380 V AC, with optional external 220 V AC/DC control supply. ## Standards compliance and isolation CE marked, the drive complies with EN/IEC 60204-11 (electrical equipment of machines), EN/IEC 60529 (enclosure protection), EN/IEC 61800-3 (EMC for adjustable speed drives), EN/IEC 61800-4 (functional safety), and EN/IEC 61800-5-1 (electrical, thermal, and energy safety). Pollution degree 2 per EN/IEC 61800-5-1, overvoltage category II. Electrical isolation between power and control circuits, with 20 kV AC dielectric strength between earth and power terminals. The integrated EMC filter covers conducted emissions for the first environment (industrial). Prospective line short-circuit current withstand is 31.5 kA for 150 ms — coordinate upstream protection accordingly. ## I/O complement and control interface The drive provides 4 software-configurable analogue inputs (0-20 mA / 4-20 mA, 250 Ω impedance, 24 V max) and 2 analogue outputs of the same type. Discrete inputs number 6 standard, expandable to 10. Speed range is 20-100%. Relative humidity range is 0-90% standard, 0-95% optional. Vibration resistance is 4.9 m/s² at 10-50 Hz. Enclosure colour is grey RAL 7032.","metaTitle":"Schneider Electric ATV1200A11906363 Altivar 1200","metaDescription":"Schneider Electric ATV1200A11906363 Altivar 1200 medium voltage drive, 920 kW, 36-pulse input, 2970-3630 V supply. CE marked, current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1400 mm (standard efficiency) 1600 mm (high efficiency)","Width":"3660 mm (high efficiency) 3360 mm (standard efficiency)","title":"ATV1200A11906363","Height":"2520 mm standard efficiency 2670 mm high efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"36 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 6.3 kV - 1100 kVA","Line current":"100 A","Apparent power":"1100 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"920 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 18 x power cells","Product destination":"Synchronous motors Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"19800 m3/h (high efficiency) 16500 m3/h (standard efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP41 IP42 IP31","Network number of phases":"3 phases","Continuous output current":"100 A (standard overload) 80 A (high overload)","Maximum transient current":"120 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"6.3 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Vector control with sensor, optional Closed-loop control with encoder Voltage/frequency ratio (V/f) Sensorless flux vector control","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"32 kW (high efficiency) 37 kW (standard efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV1200A11906363/medium-voltage-variable-speed-drive-atv1200-6-3-kv-1100-kva/"},"ai":{"faq":[{"question":"Where can I buy ATV1200A11906363 and get a price?","answer":"Submit your BOM quantity for a current price and lead time confirmation — availability is confirmed at quote time, not implied on the page."},{"question":"What compliance documentation does this drive carry?","answer":"CE marked. Complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Pollution degree 2, overvoltage category II. The integrated EMC filter covers conducted emissions for industrial environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A11906363","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A11906363 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}