{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A125001010","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A125001010","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A125001010","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A125001010","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 series, ATV1200A125001010 medium-voltage AC drive, 10.45 MW, 2970-3630 V input, 48-pulse diode rectifier, floor-standing enclosure.","salesMarkdown":"The ATV1200A125001010 is a medium-voltage variable frequency drive rated for 10.45 kW motor power, supplied from a 2970–3630 V AC line via a 48-pulse diode rectifier bridge. That input configuration draws 720 A line current and presents an apparent power of 12.5 MVA — numbers that define the upstream transformer and switchgear rating, not just the drive itself. The 48-pulse topology reduces line-side harmonics to levels that typically meet IEEE 519 without additional filtering, which saves cabinet space and avoids tuning hassles on weak grids. Prospective short-circuit current withstand is 31.5 kA for 150 ms — the drive can ride through a bolted fault on its input bus long enough for the upstream breaker to clear, without self-destructing. ## Floor-standing enclosure — dimensions and site prep The drive ships in a floor-standing enclosure with separate airflows for power and control sections. Dimensions are 3040 mm high, 15080 mm wide, 1600 mm deep — this is a room-sized assembly, not a cabinet you slide into a row. The width alone dictates a dedicated drive room or a reinforced slab. Cooling is forced convection moving 140,000 m³/h of air — plan for intake and exhaust louvres sized to that flow, plus acoustic treatment given the 80 dB noise level. Electrical connection uses M10 screw-type bars accepting up to 6 x 40 mm² per phase, entry from top or bottom. The cable gland plate must accommodate that cross-section. ## Lifecycle and compliance — active production, CE marked CE marking is in place, with compliance to EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3 (EMC), EN/IEC 61800-4, and EN/IEC 61800-5-1 (safety). The integrated EMC filter covers conducted emissions for the drive's rating class. Pollution degree 2 per EN/IEC 61800-5-1 and overvoltage category II — suitable for controlled indoor environments with non-conductive pollution.","metaTitle":"Schneider ATV1200A125001010 AC Drive, 10.45 MW, 2970-3630 V","metaDescription":"Schneider Electric ATV1200A125001010 medium-voltage VFD, 10.45 MW, 2970-3630 V input, 48-pulse rectifier, CE marked. Active production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1600 mm (standard efficiency)","Width":"15080 mm (standard efficiency)","title":"ATV1200A125001010","Height":"3040 mm standard efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"48 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 10 kV - 12500 kVA","Line current":"720 A","Apparent power":"12500 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"10450 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"28 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 24 x power cells","Product destination":"Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"140000 m3/h (standard efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP42 IP31 IP41","Network number of phases":"3 phases","Continuous output current":"720 A (standard overload) 576 A (high overload)","Maximum transient current":"864 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"10 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Voltage/frequency ratio (V/f) Closed-loop control with encoder","Asynchronous motor control profile":"Voltage/frequency ratio (V/f) Sensorless flux vector control Closed-loop control with encoder Vector control with sensor, optional","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"397 kW (standard efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV1200A125001010/medium-voltage-variable-speed-drive-atv1200-10-kv-12500-kva/"},"ai":{"faq":[{"question":"What is the ATV1200A125001010 used for?","answer":"It is a medium-voltage AC drive for asynchronous motors up to 10.45 MW, typically found on large pumps, fans, compressors, and conveyors in mining, cement, water, and oil & gas installations where a 3.3 kV supply is available."},{"question":"What compliance documentation comes with the ATV1200A125001010?","answer":"The drive carries CE marking and complies with EN/IEC 61800-3 (EMC), EN/IEC 61800-5-1 (safety), and EN/IEC 60204-11. An integrated EMC filter is standard. RoHS/REACH declarations are typically included with the documentation package from Schneider."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A125001010","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A125001010 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}