{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A14006060","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A14006060","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A14006060","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A14006060","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 series, ATV1200A14006060 medium-voltage AC drive, 1170 kW motor power, 1400 kVA apparent power, 2970–3630 V supply, 30-pulse diode rectifier, floor-standing enclosure.","salesMarkdown":"## Floor-standing footprint and site planning The ATV1200A14006060 ships in a floor-standing enclosure with separate air flows for the power section and control compartment. Dimensions are 3960 mm wide by 2670 mm high; depth is 1600 mm for the high-efficiency variant and 1500 mm for standard efficiency. Forced convection cooling moves 19800 m³/h (high efficiency) or 16500 m³/h (standard efficiency) of air. The 80 dB noise level means ear protection is needed within a few meters during commissioning. Operating position is vertical ±10 degrees. Altitude derating applies above 1000 m: 0.6 % current reduction per 100 m up to 2000 m. ## Power stage and overload capability Rated for 1170 kW motor power at 1400 kVA apparent power, with a 30-pulse diode rectifier input that reduces line harmonics below IEEE 519 thresholds without external filters. Line current is 135 A at the 2970–3630 V supply range. Overload capability is specified in two profiles: standard overload handles 1.2× In for 60 s and 1.5× In for 3 s; high overload handles 1.5× In for 60 s and 1.85× In for 3 s. This lets the drive ride through motor starting and process upsets without tripping. Output voltage follows the supply voltage (≤ power supply voltage). The drive is suitable for both synchronous and asynchronous motors. ## Construction and internal architecture The drive comprises a phase-shifting transformer, 15 power cells, medium-voltage arrestors, cooling fans, and a human-machine interface, all housed in a grey (RAL 7032) enclosure. The transformer provides the multi-pulse input that cancels low-order harmonics. Electrical connection uses M10 screw-type bar terminals with clamping capacity for 6 × 40 mm² conductors, entry from bottom or top. Ground fault protection is integrated into the drive. Dielectric strength is 20 kV AC between earth and power terminals. Prospective line Isc rating is 31.5 kA for 150 ms. ## Control interfaces and I/O Four software-configurable analogue inputs accept 0–20 mA or 4–20 mA, 24 V max, 250 Ω impedance. One analogue output is similarly configurable. Six discrete inputs are standard, expandable to ten. Control supply is 220 V AC, 3 kVA external; an optional 220 V AC/DC supply is available. The cooling fan runs on a separate 380 V AC supply, also optional for external feed. Electrical isolation is maintained between power and control circuits. Pollution degree 2 per EN/IEC 61800-5-1 applies. ## Compliance and lifecycle status CE marked. Standards compliance includes EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3 (EMC), EN/IEC 61800-4, and EN/IEC 61800-5-1. An integrated EMC filter is fitted. The drive is sourced to order against the BOM; availability and pricing confirmed at RFQ.","metaTitle":"Schneider Electric ATV1200A14006060 Altivar 1200 VFD","metaDescription":"Schneider Electric ATV1200A14006060 medium-voltage AC drive, 1170 kW motor power, 1400 kVA, 2970–3630 V input, 30-pulse rectifier, CE marked, current","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1600 mm (high efficiency) 1500 mm (standard efficiency)","Width":"3960 mm (high efficiency) 3660 mm (standard efficiency)","title":"ATV1200A14006060","Height":"2670 mm high efficiency 2670 mm standard efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"30 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 6 kV - 1400 kVA","Line current":"135 A","Apparent power":"1400 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"1170 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 15 x power cells","Product destination":"Synchronous motors Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"19800 m3/h (high efficiency) 16500 m3/h (standard efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP41 IP42 IP31","Network number of phases":"3 phases","Continuous output current":"135 A (standard overload) 108 A (high overload)","Maximum transient current":"162 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"6 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Voltage/frequency ratio (V/f) Sensorless flux vector control Closed-loop control with encoder Vector control with sensor, optional","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"47 kW (standard efficiency) 41 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV1200A14006060/medium-voltage-variable-speed-drive-atv1200-6-kv-1400-kva/"},"ai":{"faq":[{"question":"What is the ATV1200A14006060's motor power rating?","answer":"The drive is rated for 1170 kW motor power at 1400 kVA apparent power, with a line current of 135 A at the 2970–3630 V supply range."},{"question":"What compliance documentation does Schneider Electric provide for ATV1200A14006060?","answer":"The drive is CE marked and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. An integrated EMC filter is included."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A14006060","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A14006060 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}