{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A15606060","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A15606060","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A15606060","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A15606060","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 series, ATV1200A15606060 AC drive, 1304 kW motor power, 1560 kVA apparent power, 30-pulse diode rectifier, 2970-3630 V supply, floor-standing enclosure.","salesMarkdown":"## Active production — what that means for procurement The ATV1200A15606060: No stock-holding claim — quoted per BOM. ## 1304 kW motor drive — load profile and harmonic mitigation Rated for 1304 kW motor power at 1560 kVA apparent power, with a 30-pulse diode rectifier input stage. The 30-pulse topology cancels the 5th, 7th, 11th, 13th, 17th, and 19th harmonics at the input, keeping total harmonic distortion low enough to meet IEEE 519 without a separate active filter in most installations. Supply voltage range is 2970-3630 V — this is a medium-voltage drive, not a 480 V unit. The output voltage tracks the supply (≤ supply voltage), so motor winding insulation must be rated for the full DC bus potential. Line current draw is 150 A at rated load. ## Overload capability and cooling — sizing for the duty cycle Two overload profiles are available: standard overload allows 1.2× In for 60 seconds and 1.5× In for 3 seconds; high overload allows 1.5× In for 60 seconds and 1.85× In for 3 seconds. The high-overload setting is the one to use for heavy-start loads like crushers or extruders — standard overload is adequate for centrifugal pumps and fans. Cooling is forced convection with separate air flows for the transformer and power cells. The standard-efficiency configuration moves 29,900 m³/h of air; the high-efficiency version moves 33,200 m³/h. Ambient temperature and altitude derating apply — above 1000 m, derate current 0.6 % per 100 m. ## Physical footprint and installation constraints Floor-standing enclosure with separate air flows for the transformer and power cells. The standard-efficiency variant measures 3660 mm wide × 2820 mm high × 1500 mm deep; the high-efficiency variant is 3960 mm wide × 2820 mm high × 1600 mm deep. Operating position is vertical ±10 degrees — no side-mount or horizontal installation. ## Compliance and isolation — standards coverage CE marked, with compliance to EN/IEC 60204-11 (electrical equipment of machines), EN/IEC 60529 (enclosure protection), EN/IEC 61800-3 (EMC for drive systems), EN/IEC 61800-4 (drive performance), and EN/IEC 61800-5-1 (electrical safety). Pollution degree 2 per EN/IEC 61800-5-1 — suitable for controlled environments with non-conductive pollution. Electrical isolation between power and control circuits, with a dielectric strength of 20 kV AC between earth and power terminals. Overvoltage category II per EN/IEC 61800-5-1. Ground fault protection is integral to the drive.","metaTitle":"Schneider Electric ATV1200A15606060 AC Drive, 1304 kW","metaDescription":"Schneider Electric ATV1200A15606060 Altivar 1200 AC drive, 1304 kW motor power, 1560 kVA, 30-pulse rectifier, CE marked. Active production — quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1600 mm (high efficiency) 1500 mm (standard efficiency)","Width":"3960 mm (high efficiency) 3660 mm (standard efficiency)","title":"ATV1200A15606060","Height":"2820 mm standard efficiency 2820 mm high efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"30 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 6 kV - 1560 kVA","Line current":"150 A","Apparent power":"1560 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"1304 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 15 x power cells","Product destination":"Asynchronous motors Synchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"29900 m3/h (standard efficiency) 33200 m3/h (high efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP41 IP42 IP31","Network number of phases":"3 phases","Continuous output current":"150 A (standard overload) 120 A (high overload)","Maximum transient current":"180 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"6 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Voltage/frequency ratio (V/f) Sensorless flux vector control Closed-loop control with encoder Vector control with sensor, optional","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"46 kW (high efficiency) 52 kW (standard efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/ATV1200A15606060/medium-voltage-variable-speed-drive-atv1200-6-kv-1560-kva/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for ATV1200A15606060?","answer":"This is a large medium-voltage drive sourced through authorized distribution — no stock-holding claim; quoted per BOM."},{"question":"What is the closest pin-compatible alternative to ATV1200A15606060 in this AC Drive (VFD) 480V family?","answer":"No pin-compatible alternative exists within the Altivar 1200 family — this is a medium-voltage drive (2970-3630 V supply), not a 480 V unit. The 30-pulse rectifier and floor-standing enclosure are specific to this power class. A functionally similar unit would be another Altivar 1200 variant with matching voltage and power rating."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A15606060","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A15606060 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}