{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A20606666","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A20606666","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A20606666","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A20606666","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 ATV1200A20606666 medium-voltage AC drive, 1722 kW, 2970-3630 V supply, 36-pulse diode rectifier, floor-standing enclosure.","salesMarkdown":"## Medium-voltage drive for large asynchronous motors The Schneider Electric ATV1200A20606666 is an Altivar 1200 series medium-voltage AC drive rated for 1722 kW motor output, designed for large asynchronous motors in heavy industrial applications. It accepts a 2970 to 3630 V supply via a 36-pulse diode rectifier bridge, which inherently reduces line-side harmonics without external filters — a key advantage for plants with strict power-quality requirements. The drive is assembled in a floor-standing enclosure with separate airflows for the power section and control compartment, keeping the electronics away from the heat of the main circuit. The 1722 kW motor power rating is the continuous output at the drive's nominal voltage range — this is the number to match against your motor nameplate, not the apparent power rating. Apparent power is 2060 kVA, and line current is 200 A at the input — these drive the sizing of upstream transformers, cables, and the main disconnect. Overload capability is defined in two profiles: standard overload allows 1.2× rated current for 60 seconds, while high overload allows 1.5× for 60 seconds — choose the profile that matches your load cycle (conveyor vs crusher). Dielectric strength is tested at 20 kV AC between earth and power terminals — this confirms the MV isolation barrier is intact for a 3.3 kV class system. ## Installation and integration constraints Physical footprint: the enclosure is 2670 mm tall, with width ranging from 5170 mm (standard efficiency) to 5470 mm (high efficiency), and depth from 1600 mm to 1700 mm — plan for a dedicated electrical room with crane access. The drive requires external control power at 220 V AC, 3 kVA, and internal cooling fans supplied at 380 V AC — these auxiliary supplies must be factored into the panel design. Operating altitude above 1000 m requires current derating at 0.6% per 100 m; at 2000 m the available output current is roughly 94% of the sea-level rating. The 36-pulse input configuration draws a line current of 200 A and is rated for a prospective short-circuit current of 31.5 kA for 150 ms — coordinate upstream protection accordingly. CE marked and compliant with EN/IEC 61800-3 (EMC), EN/IEC 61800-4 (thermal), and EN/IEC 61800-5-1 (safety) — covers the key standards for industrial drive installations in Europe and most global markets. Pollution degree 2 per EN/IEC 61800-5-1 means the drive is rated for a normal industrial environment with only non-conductive contamination — not for wet or conductive dust areas without additional enclosure protection.","metaTitle":"Schneider Electric ATV1200A20606666 AC Drive, 1722 kW","metaDescription":"Schneider Electric ATV1200A20606666 medium-voltage AC drive, 1722 kW, 2970-3630 V input, 36-pulse rectifier, CE marked. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1700 mm (high efficiency) 1600 mm (standard efficiency)","Width":"5170 mm (standard efficiency) 5470 mm (high efficiency)","title":"ATV1200A20606666","Height":"2670 mm high efficiency 2670 mm standard efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"36 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 6.6 kV - 2060 kVA","Line current":"200 A","Apparent power":"2060 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"1722 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 18 x power cells","Product destination":"Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"23100 m3/h (high efficiency) 23100 m3/h (standard efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP41 IP42 IP31","Network number of phases":"3 phases","Continuous output current":"180 A (standard overload) 144 A (high overload)","Maximum transient current":"216 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"6.6 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f) Vector control with sensor, optional Sensorless flux vector control","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"69 kW (standard efficiency) 60 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/vn/en/product/download-pdf/ATV1200A20606666?filename=Schneider+Electric_Altivar-1200_ATV1200A20606666.pdf', 'path_name': '7827b1aafd84bde803b029c3f11bcefa.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/7827b1aafd84bde803b029c3f11bcefa.pdf', 'status': 1}","sourceUrl":"https://www.se.com/vn/en/product/ATV1200A20606666/medium-voltage-variable-speed-drive-atv1200-6-6-kv-2060-kva/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A20606666","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A20606666 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}