{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ATV1200A28705555","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ATV1200A28705555","canonicalUrl":"https://aoctrl.com/schneider/ATV1200A28705555","factsUrl":"https://aoctrl.com/api/mcp/products/ATV1200A28705555","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar 1200 ATV1200A28705555 medium voltage variable frequency drive, 2399 kW, 3.0-3.6 kV input, 30-pulse diode rectifier, floor-standing enclosure.","salesMarkdown":"## 2.4 MW medium voltage drive for synchronous and asynchronous motors The Schneider Electric Altivar 1200 ATV1200A28705555 is a medium voltage variable frequency drive rated for 2399 kW motor power, designed to control both synchronous and asynchronous motors from a 3.0-3.6 kV supply. It uses a 30-pulse diode rectifier bridge on the input, which inherently cancels low-order harmonics and meets IEEE 519 without external filtering — a key advantage for installations feeding sensitive distribution networks. The drive is assembled in a floor-standing enclosure with separate airflows for the power section and control electronics, keeping the control compartment cooler and cleaner than a shared plenum design. ## Overload profile and motor starting capability The overload withstand defines the start-and-run margin: 1.2 x rated current for 60 s under standard overload, 1.5 x for 3 s. For high-overload duty, it holds 1.5 x for 60 s and 1.85 x for 3 s — enough to start a loaded conveyor or crusher without oversizing the drive. Speed range is 20-100 %, meaning the drive can regulate down to 20 % of base speed with full torque capability. The prospective line short-circuit current withstand is 31.5 kA for 150 ms — the drive can ride through a downstream fault without self-destructing, provided the upstream protection coordinates within that window. ## Physical footprint and site preparation The floor-standing cabinet measures 5770 mm wide by 2670 mm high; depth is 1700 mm for the high-efficiency variant and 1600 mm for standard efficiency — plan for a dedicated electrical room with a reinforced floor and overhead busway or trench access. Cooling is forced convection with 29700 m³/h airflow — the room ventilation must handle that exhaust volume plus the 80 dB noise level at full load. The drive requires two separate supplies: 220 V AC, 3 kVA for control, and 380 V AC for the cooling fans. Either can be fed from an external source if the internal transformer is not used. ## Standards compliance and isolation CE marked and designed to EN/IEC 61800-3 (EMC), EN/IEC 61800-4 (adjustable speed drives), and EN/IEC 61800-5-1 (safety) — the drive carries the full suite of European MV drive standards. Electrical isolation between power and control circuits is maintained, and the dielectric strength between earth and power terminals is 20 kV AC — essential for personnel safety in a 3.3 kV class installation. Pollution degree 2 per EN/IEC 61800-5-1, meaning the drive is rated for normal industrial environments with only non-conductive dust — not for wet or conductive atmospheres without additional enclosure protection. ## System composition and I/O The drive ships as a complete system: two plinths, a phase-shifting transformer, medium voltage arrestors, cooling fans, an HMI, and 15 power cells — not a bare inverter section. It includes 4 software-configurable analogue inputs (0-20 mA / 4-20 mA) and 6 discrete inputs (expandable to 10). The analogue output is also software-configurable for 0-20 mA or 4-20 mA DC. Main power connection uses M10 bar-type terminals accepting up to 6 x 40 mm² per phase, with cable entry from the top or bottom.","metaTitle":"Schneider Electric ATV1200A28705555 Altivar 1200 VFD","metaDescription":"Schneider Electric Altivar 1200 medium voltage VFD, 2399 kW motor power, 30-pulse input, 3.0-3.6 kV supply. Active production. CE marked.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 480V"],"specifications":{"Depth":"1700 mm (high efficiency) 1600 mm (standard efficiency)","Width":"5770 mm (standard efficiency) 6070 mm (high efficiency)","title":"ATV1200A28705555","Height":"2670 mm high efficiency 2670 mm standard efficiency","Supply":"External supply for control at 220 V AC, 3 kVA Internal supply for cooling fan at 380 V AC External supply for control at 220 V AC/DC (optional) External supply for cooling fan at 380 V AC (optional)","Marking":"CE","Isolation":"Electrical between power and control","Standards":"EN/IEC 60204-11 EN/IEC 60529 EN/IEC 61800-3 EN/IEC 61800-4 EN/IEC 61800-5-1","EMC filter":"Integrated","Input type":"30 pulse diode rectifier bridge","Noise level":"80 dB","Speed range":"20...100","description":"medium voltage variable speed drive ATV1200 - 5.5 kV - 2870 kVA","Line current":"320 A","Apparent power":"2870 kVA","Assembly style":"In floor-standing enclosure with separate air flows","Motor power kW":"2399 kW","Output voltage":"<= power supply voltage","Protection type":"Ground fault protection: drive","Type of cooling":"Forced convection","lifecycle_stage":"current","Pollution degree":"2 conforming to EN/IEC 61800-5-1","Range of product":"Altivar 1200","Device short name":"ATV1200","Relative humidity":"0...90 % 0...95 % optional","Operating altitude":"1000...2000 m with current derating 0.6 % per 100 m","Operating position":"Vertical +/- 10 degree","Overload withstand":"1.2 In, standard overload, 60 s 1.5 In, standard overload, 3 s 1.5 In, high overload, 60 s 1.85 In, high overload, 3 s","Analogue input type":"software-configurable current: 0...20 mA/4...20 mA, 24 V max, impedance: 250 Ohm","Colour of enclosure":"Grey (RAL 7032)","Dielectric strength":"20 kV AC between earth and power terminals","Product Composition":"2 x plinth Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface 15 x power cells","Product destination":"Synchronous motors Asynchronous motors","Analogue output type":"software-configurable current: 0...20 mA/4...20 mA DC, impedance: 250 Ohm","Overvoltage category":"II conforming to EN/IEC 61800-5-1","Prospective line Isc":"31.5 kA for 150 ms","Vibration resistance":"4.9 m/s² (f= 10...50 Hz)","Analogue input number":"4","Discrete input number":"6 10 (optional)","Electrical connection":"Bar - screw type M10, clamping capacity: 6 x 40 mm² (L1/R, L2/S, L3/T) entry from the bottom or from the top","Supply voltage limits":"2970...3630 V","Volume of cooling air":"29700 m3/h (standard efficiency) 29700 m3/h (high efficiency)","Analogue output number":"2 4 (optional)","Discrete output number":"10 14 (optional)","IP degree of protection":"IP41 IP42 IP31","Network number of phases":"3 phases","Continuous output current":"301 A (standard overload) 241 A (high overload)","Maximum transient current":"361 A for 60 s","Product or component type":"Medium voltage variable speed drive","[Us] rated supply voltage":"5.5 kV +/- 10 %","Communication port protocol":"Human machine interface: Modbus with 2-wire RS485(1) - SUB-D 9 Human machine interface: Modbus TCP with (1) - RJ45 Human machine interface: EtherNet/IP with (1) - RJ45 Human machine interface: Profibus with (1) - SUB-D 9 Human machine interface: DeviceNet with (1) - SUB-D 9","Nominal switching frequency":"600 Hz","Product specific application":"Fan, pump, compressor, conveyor","Speed drive output frequency":"0.5...120 Hz voltage/frequency ratio (V/f) 0.5...70 Hz vector control with/without speed feedback","[Uc] control circuit voltage":"220 V","Synchronous motor control profile":"Closed-loop control with encoder Voltage/frequency ratio (V/f)","Asynchronous motor control profile":"Sensorless flux vector control Closed-loop control with encoder Voltage/frequency ratio (V/f) Vector control with sensor, optional","Acceleration and deceleration ramps":"Linear from 0...3200 s","Ambient air temperature for storage":"-10...60 °C","Ambient air temperature for operation":"0...40 °C 40...50 °C (with current derating of 2 % per °C)","Total Losses At 100 % Load Including Fan Power":"96 kW (standard efficiency) 84 kW (high efficiency)","Drive Efficiency With Transformer (Including Fan Power)":"96 % (standard efficiency) 96.5 % (high efficiency)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/vn/en/product/download-pdf/ATV1200A28705555?filename=Schneider+Electric_Altivar-1200_ATV1200A28705555.pdf', 'path_name': 'e9e20c8ab3c479a0cfc904bf03968846.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/e9e20c8ab3c479a0cfc904bf03968846.pdf', 'status': 1}","sourceUrl":"https://www.se.com/vn/en/product/ATV1200A28705555/medium-voltage-variable-speed-drive-atv1200-5-5-kv-2870-kva/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for ATV1200A28705555?","answer":"The drive carries CE marking and is designed to EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Documentation includes the declaration of conformity and the full standards compliance report."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ATV1200A28705555","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ATV1200A28705555 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}